On Thu, 24 Nov 2011 04:53:17 -0500, Rob H. wrote:
> This week's set is ready, I haven't changed anything here since the
> newsgroup service provider said they would look into the problem of dropped
> posts, hopefully they have it figured out by now.
>
> http://55tools.blogspot.com/
>
> Rob
Well i can see it Rob so it looks like it worked wooo hoo
2412 is a blowtorch for use to preheat an old traktor engine:
http://www.youtube.com/watch?v=P5vukm13lis
Am 24.11.2011 10:53, schrieb Rob H.:
> This week's set is ready, I haven't changed anything here since the
> newsgroup service provider said they would look into the problem of
> dropped posts, hopefully they have it figured out by now.
>
> http://55tools.blogspot.com/
>
>
> Rob
On Nov 24, 3:53=A0am, "Rob H." <[email protected]> wrote:
> This week's set is ready, I haven't changed anything here since the
> newsgroup service provider said they would look into the problem of dropp=
ed
> posts, hopefully they have it figured out by now.
>
> http://55tools.blogspot.com/
>
> Rob
Rob,
Just a thought on 2408. May be a garden tool, but also makes me think
of something grab loose straw or hay with, as the tines look a little
light for digging in dirt.The sping loaded piece looks like something
to keep the tines from stabbing into unwanted areas, or to help push
stuff off of te tines.
nORM
On Thu, 24 Nov 2011 15:38:52 -0500, Alexander Thesoso
<[email protected]> wrote:
>2407 A couple of people have stated that this is a Stirling engine. I
>was led to discount that possibility because of 2 factors:
>Both cylinders seem to have cooling fins, while one cylinder of a
>Stirling engine is heated.
>The pistons, unless there is an interesting gear arrangement in the
>middle, seem to be 180 degrees out of phase, rather than 90 degrees for
>a Stirling engine.
>If this is a Stirling engine, can someone explain how it works?
>
>
>On 11/24/2011 6:15 AM, Alexander Thesoso wrote:
>> 2407 I'll guess an air-compressor. Belt driven from the flywheel. The
>> cooling fins are what make me think it is a compressor, rather than an
>> air motor.
>>
>> On 11/24/2011 4:53 AM, Rob H. wrote:
>>> This week's set is ready, I haven't changed anything here since the
>>> newsgroup service provider said they would look into the problem of
>>> dropped posts, hopefully they have it figured out by now.
>>>
>>> http://55tools.blogspot.com/
>>>
>>>
>>> Rob
>>
I'd need to see it up closer, because that sure looks like an alcohol
burner in the middle at first glance... but two cylinder Stirling
with the hot sections common in the middle.
--<< Bruce >>--
On Nov 24, 4:53=A0am, "Rob H." <[email protected]> wrote:
> This week's set is ready, I haven't changed anything here since the
> newsgroup service provider said they would look into the problem of dropp=
ed
> posts, hopefully they have it figured out by now.
>
> http://55tools.blogspot.com/
>
> Rob
2407: stirling cycle engine
In article <[email protected]>, [email protected]
says...
> This week's set is ready, I haven't changed anything here since the
> newsgroup service provider said they would look into the problem of dropped
> posts, hopefully they have it figured out by now.
>
> http://55tools.blogspot.com/
>
>
> Rob
>
>
2408 Hand Harrow
2411 Ice Shaver with pick in the handle
Rob H. wrote the following:
> This week's set is ready, I haven't changed anything here since the
> newsgroup service provider said they would look into the problem of
> dropped posts, hopefully they have it figured out by now.
>
> http://55tools.blogspot.com/
>
>
> Rob
2410 appears to be a slag remover for a welder.
--
Bill
In Hamptonburgh, NY
In the original Orange County. Est. 1683
To email, remove the double zeroes after @
Rob H. wrote:
> This week's set is ready, I haven't changed anything here since the
> newsgroup service provider said they would look into the problem of
> dropped posts, hopefully they have it figured out by now.
>
> http://55tools.blogspot.com/
>
>
> Rob
I believe #2412 is a blowtorch for use with a lead pot . Plumbers useta
use them for making joints in cast iron drain pipes .
--
Snag
Learning keeps
you young !
On Thu, 24 Nov 2011 15:23:16 +0000 (UTC), Willem <[email protected]> wrote:
>By stating that you didn't do anything different, you did
>something different.
Exactly!
>Heisenbug, indeed!
Is this that dead cat thing? :)
--
William
"Rob H." <[email protected]> wrote in message
news:<[email protected]>...
> This week's set is ready, I haven't changed anything here since the
> newsgroup service provider said they would look into the problem of
> dropped posts, hopefully they have it figured out by now.
>
> http://55tools.blogspot.com/
>
>
> Rob
That's the first original post I've seen by yourself in months, so looks
like ES have sorted it.
D
2407 I'll guess an air-compressor. Belt driven from the flywheel. The
cooling fins are what make me think it is a compressor, rather than an
air motor.
On 11/24/2011 4:53 AM, Rob H. wrote:
> This week's set is ready, I haven't changed anything here since the
> newsgroup service provider said they would look into the problem of
> dropped posts, hopefully they have it figured out by now.
>
> http://55tools.blogspot.com/
>
>
> Rob
"David B" <[email protected]> wrote in message
news:[email protected]...
> "Rob H." <[email protected]> wrote in message
> news:<[email protected]>...
>> This week's set is ready, I haven't changed anything here since the
>> newsgroup service provider said they would look into the problem of
>> dropped posts, hopefully they have it figured out by now.
>>
>> http://55tools.blogspot.com/
>>
>>
>> Rob
>
> That's the first original post I've seen by yourself in months, so looks
> like ES have sorted it.
>
> D
Glad to hear that they fixed the problem!
I see you..... which is good.
2407. I'm guessing a model of a steam engine.
2408. I'd just be guessing. Ether a garden implement, or
something for sorting or carding wool?
2409. No clue.
2410. The coiled handle is often used for iron working and
hot areas, the handle cools down faster. Beyond that.... no
clue.
2411. Something for wool carding?
2412. some kind of pressurized liquid fuel torch. Beyond
that.....
--
Christopher A. Young
Learn more about Jesus
www.lds.org
.
"Rob H." <[email protected]> wrote in message
news:[email protected]...
This week's set is ready, I haven't changed anything here
since the
newsgroup service provider said they would look into the
problem of dropped
posts, hopefully they have it figured out by now.
http://55tools.blogspot.com/
Rob
On 11/24/2011 5:40 AM, Snag wrote:
> Rob H. wrote:
>> This week's set is ready, I haven't changed anything here since the
>> newsgroup service provider said they would look into the problem of
>> dropped posts, hopefully they have it figured out by now.
>>
>> http://55tools.blogspot.com/
>>
>>
>> Rob
>
> I believe #2412 is a blowtorch for use with a lead pot . Plumbers useta
> use them for making joints in cast iron drain pipes .
I did not do well on any of this puzzle's mysteries other than the blow
torch
I agree with Snag about the plumber's lead pot. Here is an overly
simple picture:
http://www.tpub.com/content/construction/14265/css/14265_81.htm
--
___________________________________
Keep the whole world singing . . .
Dan G
"Rob H." <[email protected]> wrote in message
news:[email protected]...
> This week's set is ready, I haven't changed
> anything here since the newsgroup service
> provider said they would look into the problem
> of dropped posts, hopefully they have it figured
> out by now.
>
> http://55tools.blogspot.com/
>
>
> Rob
2410: A welders chipping hammer. It is missing the
brush on
the back. No question about it. The chisel end has
been
ground to a point, it is usually a straight chisel
edge new.
On 11/24/2011 3:53 AM, Rob H. wrote:
> This week's set is ready, I haven't changed anything here since the
> newsgroup service provider said they would look into the problem of
> dropped posts, hopefully they have it figured out by now.
>
> http://55tools.blogspot.com/
>
>
> Rob
I wonder if the #2411 is some type of carpet stretcher
Yep, found one on Ebay:
http://www.ebay.com/itm/Victor-Carpet-Stretcher-PATD-1889-CM-Mallory-Albion-NY-/360394470684
--
___________________________________
Keep the whole world singing . . .
Dan G
>>> http://55tools.blogspot.com/
>>>
>>>
>>> Rob
>>
>> I believe #2412 is a blowtorch for use with a lead pot . Plumbers
>> useta
>> use them for making joints in cast iron drain pipes .
>
> I did not do well on any of this puzzle's mysteries other than the blow
> torch
> I agree with Snag about the plumber's lead pot. Here is an overly simple
> picture:
> http://www.tpub.com/content/construction/14265/css/14265_81.htm
I'm sure it could also be used by a plumber but according to the owner it
was used for a different purpose other than soldering or melting lead.
"Walter Kraft" <[email protected]> wrote in message
news:[email protected]...
> 2412 is a blowtorch for use to preheat an old traktor engine:
> http://www.youtube.com/watch?v=P5vukm13lis
Yes, the owner said it was for preheating the early Hit/miss oil field
gasoline engines. Thanks for the link, I couldn't find another one of these
torches on the web.
2407 A couple of people have stated that this is a Stirling engine. I
was led to discount that possibility because of 2 factors:
Both cylinders seem to have cooling fins, while one cylinder of a
Stirling engine is heated.
The pistons, unless there is an interesting gear arrangement in the
middle, seem to be 180 degrees out of phase, rather than 90 degrees for
a Stirling engine.
If this is a Stirling engine, can someone explain how it works?
On 11/24/2011 6:15 AM, Alexander Thesoso wrote:
> 2407 I'll guess an air-compressor. Belt driven from the flywheel. The
> cooling fins are what make me think it is a compressor, rather than an
> air motor.
>
> On 11/24/2011 4:53 AM, Rob H. wrote:
>> This week's set is ready, I haven't changed anything here since the
>> newsgroup service provider said they would look into the problem of
>> dropped posts, hopefully they have it figured out by now.
>>
>> http://55tools.blogspot.com/
>>
>>
>> Rob
>
On 11/24/2011 4:27 PM, dpb wrote:
> On 11/24/2011 3:53 AM, Rob H. wrote:
> First is an Essex air engine...sold as toys in old Monkey-Ward cagalog
> and larger versions used for light power applications--arcade games
> amongst them.
Here's a page of interest re:
<http://www.stirlingengines.org.uk/manufact/manf/usa/ess.html>
--
"dpb" <[email protected]> wrote in message news:[email protected]...
> On 11/24/2011 3:53 AM, Rob H. wrote:
> First is an Essex air engine...sold as toys in old Monkey-Ward cagalog and
> larger versions used for light power applications--arcade games amongst
> them.
>
> --
Yes, it's a hot air engine, 1/40th hp for running a fan or other light duty
devices.
"Rob H." <[email protected]> wrote in message
news:[email protected]...
> This week's set is ready, I haven't changed anything here since the
> newsgroup service provider said they would look into the problem of
> dropped posts, hopefully they have it figured out by now.
>
> http://55tools.blogspot.com/
>
>
> Rob
They do! Thanks for putting up with this furor.
--
" Well you can't trust a special like the old time coppers
When you can't find your way 'ome"
"Stormin Mormon" <cayoung61**spamblock##@hotmail.com> wrote in message
news:[email protected]...
>I see you..... which is good.
>
> 2407. I'm guessing a model of a steam engine.
> 2408. I'd just be guessing. Ether a garden implement, or
> something for sorting or carding wool?
> 2409. No clue.
> 2410. The coiled handle is often used for iron working and
Coiled handle also use on fireplace pokers.
On 11/24/11 4:53 AM, Rob H. wrote:
> This week's set is ready, I haven't changed anything here since the
> newsgroup service provider said they would look into the problem of
> dropped posts, hopefully they have it figured out by now.
>
> http://55tools.blogspot.com/
>
>
> Rob
2408 looks good for controlling weeds that spread by stolons, such as
Bermuda (devil's) grass and English ivy. The blade would serve as a
depth gage so you won't damage desirable roots. The curved tines would
pull stolons above ground level so you can yank them out.
Thanks for the info.
The patent:
http://ip.com/patent/US723660
is particularly good, in that it is short and clearly explains how it
works. Tricky, using a loosely fitting displacer piston.
On 11/24/2011 5:29 PM, dpb wrote:
> On 11/24/2011 4:27 PM, dpb wrote:
>> On 11/24/2011 3:53 AM, Rob H. wrote:
>> First is an Essex air engine...sold as toys in old Monkey-Ward cagalog
>> and larger versions used for light power applications--arcade games
>> amongst them.
>
> Here's a page of interest re:
>
> <http://www.stirlingengines.org.uk/manufact/manf/usa/ess.html>
>
> --
>
>>On 11/24/2011 6:15 AM, Alexander Thesoso wrote:
>>> 2407 I'll guess an air-compressor. Belt driven from the flywheel. The
>>> cooling fins are what make me think it is a compressor, rather than an
>>> air motor.
>>>
>>> On 11/24/2011 4:53 AM, Rob H. wrote:
>>>> This week's set is ready, I haven't changed anything here since the
>>>> newsgroup service provider said they would look into the problem of
>>>> dropped posts, hopefully they have it figured out by now.
>>>>
>>>> http://55tools.blogspot.com/
>>>>
>>>>
>>>> Rob
>>>
>
> I'd need to see it up closer, because that sure looks like an alcohol
> burner in the middle at first glance... but two cylinder Stirling
> with the hot sections common in the middle.
You're right about it being an alcohol burner in the middle, my answer for
this is that it's a hot air engine, I don't know if it's considered some
type of Stirling engine or not, I'll let someone else answer that question.
Still not sure about two of the items this week but the rest of the answers
can be seen here:
http://55tools.blogspot.com/2011/11/set-416.html#answers
Rob
On 11/25/2011 4:13 PM, Rob H. wrote:
...
> You're right about it being an alcohol burner in the middle, my answer
> for this is that it's a hot air engine, I don't know if it's considered
> some type of Stirling engine or not, I'll let someone else answer that
> question.
...
Strictly speaking and by current convention, no.
'Stirling engine' should refer exclusively to a closed-cycle
regenerative heat engine with a permanently gaseous working fluid.
These aren't.
--
"Rob H." <[email protected]> wrote in message
news:[email protected]...
> This week's set is ready, I haven't changed anything here since the
> newsgroup service provider said they would look into the problem of
> dropped posts, hopefully they have it figured out by now.
>
> http://55tools.blogspot.com/
>
>
> Rob
My guess for 2409:
2409 looks a lot like a machine for bending rods or tubing. The crank would
feed the rod/tubing between the toothed wheels. The handle would control
the bend radius.
I also use Eternal September, and for the first time in months I saw Rob's
initial post.
Rob: Keep up the good work. Over 2000 objects, and you are still finding
interesting and puzzling objects. Thank you!
Carl G.
Rob H. wrote:
> This week's set is ready, I haven't changed anything here since the
> newsgroup service provider said they would look into the problem of
> dropped posts, hopefully they have it figured out by now.
>
> http://55tools.blogspot.com/
>
>
> Rob
I believe #2412 is a blowtorch for use with a lead pot . Plumbers useta
use them for making joints in cast iron drain pipes .
--
Snag
Learning keeps
you young !
Rob H. wrote:
)
) "David B" <[email protected]> wrote in message
) news:[email protected]...
)> "Rob H." <[email protected]> wrote in message
)> news:<[email protected]>...
)>> This week's set is ready, I haven't changed anything here since the
)>> newsgroup service provider said they would look into the problem of
)>> dropped posts, hopefully they have it figured out by now.
)>>
)>> http://55tools.blogspot.com/
)>>
)>>
)>> Rob
)>
)> That's the first original post I've seen by yourself in months, so looks
)> like ES have sorted it.
)>
)> D
)
)
) Glad to hear that they fixed the problem!
Except that in this post you wrote something different (the comment about
not having changed anything), so it wouldn't trigger the 'almost exact same
post' filter. By stating that you didn't do anything different, you did
something different. Heisenbug, indeed!
SaSW, Willem
--
Disclaimer: I am in no way responsible for any of the statements
made in the above text. For all I know I might be
drugged or something..
No I'm not paranoid. You all think I'm paranoid, don't you !
#EOT
On 2011-11-24, Rob H. <[email protected]> wrote:
> This week's set is ready, I haven't changed anything here since the
> newsgroup service provider said they would look into the problem of dropped
> posts, hopefully they have it figured out by now.
>
> http://55tools.blogspot.com/
Posting from rec.crafts.metalworking as always.
2407) Looks like a Stirling heat engine. Not sure what it is
intended to power but the groove on the flywheel looks like a
match for the belt on the old foot treadle powered sewing
machines, which would be a reasonable load for this kind of
engine.
2408) Perhaps for digging up potatos.
2409) Looks like something to feed and (perhaps split) some ribbon
form of workpiece. It feeds through the pair of gears with
grooves. Whether it feeds out the U-shaped guide shown on the
near side or feeds in through that is not yet clear. If the
width of the guide matches the width of the workpiece, then the
gears will punch two rows of holes near the edges of the
workpiece -- leaving it looking something like movie film.
2410) Perhaps a grate shaker for an old wood stove, or a coal fueled
furnace.
2411) No clue -- other than nasty to have sliding against your skin.
Perhaps part of a wool carding setup?
2412) Gasoline or kerosene fired heater -- looks like a modification
of the old plumber's blowtorch.
Now to post this and then go see what others have suggested.
(It does not help that the punkin' chunkin' TV special is on while I'm
typing. :-)
Enjoy,
DoN.
--
Remove oil spill source from e-mail
Email: <[email protected]> | Voice (all times): (703) 938-4564
(too) near Washington D.C. | http://www.d-and-d.com/dnichols/DoN.html
--- Black Holes are where God is dividing by zero ---
On 2011-11-25, Rob H. <[email protected]> wrote:
>> I'd need to see it up closer, because that sure looks like an alcohol
>> burner in the middle at first glance... but two cylinder Stirling
>> with the hot sections common in the middle.
>
> You're right about it being an alcohol burner in the middle, my answer for
> this is that it's a hot air engine, I don't know if it's considered some
> type of Stirling engine or not, I'll let someone else answer that question.
>
> Still not sure about two of the items this week but the rest of the answers
> can be seen here:
>
> http://55tools.blogspot.com/2011/11/set-416.html#answers
How about that! It actually says that running sewing machines
is one of its uses - and that was what I had suggested based on the
pulley groove being similar to the old foot-treadle operated sewing
machine which my grandmother had and which I played with as a kid.
Enjoy,
DoN.
--
Remove oil spill source from e-mail
Email: <[email protected]> | Voice (all times): (703) 938-4564
(too) near Washington D.C. | http://www.d-and-d.com/dnichols/DoN.html
--- Black Holes are where God is dividing by zero ---
On Thu, 24 Nov 2011 04:53:17 -0500, "Rob H." <[email protected]>
wrote:
>This week's set is ready, I haven't changed anything here since the
>newsgroup service provider said they would look into the problem of dropped
>posts, hopefully they have it figured out by now.
>
>http://55tools.blogspot.com/
>
>
>Rob
2407 - Stirling engine
2408 - Looks like the bar is to knock down whatever you are collecting
with the tines. Hand collecting grain?
2409 - Best guess, a crimper for decorative metal foil ribbon.
2410 - Yup, Welder's Slag Hammer with a reground tip and no brush.
2411 - Wool carding hand tool
2412 - Vertical gasoline blowtorch - for a lead melting pot or other
stationary uses.