I'm looking for prefinished plywood in Houston, specifically 1/2" Baltic
birch prefinished on both sides and 3/4" plywood hard maple one side, birch
on the other prefished on just the birch side; both are going to be used on
a kitchen cabinet project. Can these be bought? Anyone know of a local
supplier? I have done some calling around and web searching but only seen a
very limited selection and the quality was pretty poor.
thanks,
Peter
"Peter Wells" <[email protected]> wrote in message
news:[email protected]...
> I'm looking for prefinished plywood in Houston, specifically 1/2" Baltic
> birch prefinished on both sides and 3/4" plywood hard maple one side,
> birch on the other prefished on just the birch side; both are going to be
> used on a kitchen cabinet project. Can these be bought? Anyone know of a
> local supplier? I have done some calling around and web searching but
> only seen a very limited selection and the quality was pretty poor.
>
> thanks,
>
> Peter
>
Most prefinished panels come in 1/4" thickness and is ready to be put up on
a wall. Typically the thicker stock that will be used in smaller cut pieces
would be damaged during the cutting and assembly process.