You folks here have helped me to cultivate an interest in planes. Today I
found a Stanley 118 at an antique store for $32. It looked like it was in
pretty good shape. Evidentally it is made of steel rather than cast
iron--not sure whether this is a good feature or not. When I held it up to
a straight edge I could see just a little light (wear) above the mouth (I
suppose this is normal?). Does this plane sound like any kind of deal?
Thanks for your thoughts,
Bill
On May 26, 6:33 pm, "Bill" <[email protected]> wrote:
> You folks here have helped me to cultivate an interest in planes. Today I
> found a Stanley 118 at an antique store for $32. It looked like it was in
> pretty good shape. Evidentally it is made of steel rather than cast
> iron--not sure whether this is a good feature or not. When I held it up to
> a straight edge I could see just a little light (wear) above the mouth (I
> suppose this is normal?). Does this plane sound like any kind of deal?
>
> Thanks for your thoughts,
Not really a deal. You can get them for a good deal less than that,
including shipping, on eBay.
Patrick Leach has an excellent web site if you're interested in
Stanley planes. Here's what he has to say about the 118:
http://www.supertool.com/StanleyBG/stan12.htm#num118
You should look at the 9 1/2, 60 1/2 or 65. An adjustable mouth is a
_really_ nice feature to have, so make sure that whatever model number
you get it has that feature - some of the earlier models didn't have
adjustable mouths.
R
"Bill" <[email protected]> wrote in message
news:[email protected]...
> You folks here have helped me to cultivate an interest in planes. Today I
> found a Stanley 118 at an antique store for $32. It looked like it was in
> pretty good shape. Evidentally it is made of steel rather than cast
> iron--not sure whether this is a good feature or not. When I held it up
> to a straight edge I could see just a little light (wear) above the mouth
> (I suppose this is normal?). Does this plane sound like any kind of deal?
This auction ends soon but the bid is at $14.50 at the moment...
http://cgi.ebay.com/VERY-CLEAN-STANLEY-NO-118-LOW-ANGLE-STUDENT-PLANE_W0QQitemZ200112845620QQihZ010QQcategoryZ13874QQssPageNameZWDVWQQrdZ1QQcmdZViewItem
"CW" <[email protected]> wrote in message
news:[email protected]...
> Fact is, 60 1/2s are easy. The new ones are just fine.
Is this the popular opinion around here? -Bill
>
> "Bill" <[email protected]> wrote in message
> news:[email protected]...
>> Thank you to all of you that replied to my post. I'm glad I didn't
> purchase
>> the Stanley 118 plane I found in haste. I will keep my eyes out for an
> old
>> 60 1/2 plane. How can I be sure I am looking at a good (i.e. old) one?
>>
>> --Bill
>>
>>
>
>
Don't know. Just know what works. They need tuning. Likely the old ones
would too. 15 minutes and they work great.
"Bill" <[email protected]> wrote in message
news:[email protected]...
>
> "CW" <[email protected]> wrote in message
> news:[email protected]...
> > Fact is, 60 1/2s are easy. The new ones are just fine.
>
> Is this the popular opinion around here? -Bill
>
>
In article <[email protected]>,
Bill <[email protected]> wrote:
>
>"CW" <[email protected]> wrote in message
>news:[email protected]...
>> Fact is, 60 1/2s are easy. The new ones are just fine.
>
>Is this the popular opinion around here? -Bill
>
Can't speak to the "new" 60 1/2, I have an older one. but the Stanley 12-060,
their new-style block plane, works as well as the 60 1/2, and has a
lateral adjusting lever as well. Only caveat is it is somewhat larger
than a 60 1/2.
--
Better to be stuck up in a tree than tied to one.
Larry Wasserman - Baltimore Maryland - lwasserm(a)sdf. lonestar.org
Fact is, 60 1/2s are easy. The new ones are just fine.
"Bill" <[email protected]> wrote in message
news:[email protected]...
> Thank you to all of you that replied to my post. I'm glad I didn't
purchase
> the Stanley 118 plane I found in haste. I will keep my eyes out for an
old
> 60 1/2 plane. How can I be sure I am looking at a good (i.e. old) one?
>
> --Bill
>
>
I went to Google to see what a #118 Stanley looked like. I
happened to go to this site:
http://www.supertool.com/StanleyBG/stan12.htm
I enjoyed the layout and descriptions.
The author made two wonderful comments on this plane:
I love this plane, not because it's a good one to use, but because
of its description in the catalogs - it was advertised as being
"boy proof."
and
The cutter is pitched at 12 degrees, and is adjustable by an end
screw. There is no adjustable mouth on this plane. This plane is
also a piece of junk when compared to the other low angle block
planes, but some might find it useful to strip paint.
--
______________________________
Keep the whole world singing . . . .
DanG (remove the sevens)
[email protected]
"Bill" <[email protected]> wrote in message
news:[email protected]...
> You folks here have helped me to cultivate an interest in
> planes. Today I found a Stanley 118 at an antique store for
> $32. It looked like it was in pretty good shape. Evidentally
> it is made of steel rather than cast iron--not sure whether this
> is a good feature or not. When I held it up to a straight edge
> I could see just a little light (wear) above the mouth (I
> suppose this is normal?). Does this plane sound like any kind of
> deal?
>
> Thanks for your thoughts,
> Bill
>
On Sat, 26 May 2007 18:33:01 -0400, "Bill" <[email protected]>
wrote:
...
>Thanks for your thoughts,
>Bill
>
My thoughts: Pass on the 118 unless you're just trying to fill out a
collection of planes. Get an old 60 1/2, put a Hock blade in it and
"Scary Sharpen" it. It will become a permanent resident of your shop
apron pocket.
There's about a dozen current auctions on eBay for 60 1/2 planes as I
write this.