Looking for some measurements on this machine:
HEAVY DUTY 16 SPEED BENCH DRILL PRESS [13-7/8'' SWING]
http://www.harborfreight.com/cpi/ctaf/displayitem.taf?Itemnumber=38142
Will gladly send you a $25 check if you can assist! Need micrometer or
excellent caliper skills to get measurement of quill to .001" for me...
Plus some other numbers.
Thank you for any help you can offer!
Regards,
Joe Agro, Jr.
(800) 871-5022
01.908.542.0244
Automatic / Pneumatic Drills: http://www.AutoDrill.com
Multiple Spindle Drills: http://www.Multi-Drill.com
V8013-R
I've got one, what measurements do you need ? 1.574 one way, 1.573 the
other (its HF what do you expect)
gary owens
Deltona, FL
"Joe AutoDrill" <[email protected]> wrote in message
news:vXYqj.111947$U12.67218@trnddc06...
> Looking for some measurements on this machine:
>
> HEAVY DUTY 16 SPEED BENCH DRILL PRESS [13-7/8'' SWING]
> http://www.harborfreight.com/cpi/ctaf/displayitem.taf?Itemnumber=38142
>
> Will gladly send you a $25 check if you can assist! Need micrometer or
> excellent caliper skills to get measurement of quill to .001" for me...
> Plus some other numbers.
>
> Thank you for any help you can offer!
>
> Regards,
> Joe Agro, Jr.
> (800) 871-5022
> 01.908.542.0244
> Automatic / Pneumatic Drills: http://www.AutoDrill.com
> Multiple Spindle Drills: http://www.Multi-Drill.com
>
> V8013-R
>
>
>
Gary,
Sorry. Was out yesterday replacing stuff that broke in the cold (alternator
on car just prior to my 30 mile highway jaunt...)
My customer is sending me his physical drill press (!?!) rather than buy a
caliper to measure it...
But I'd still be willing to reimburse you if you wouldn't mind measuring up
your machine just to know whether they change the measurements from run to
run... I can't very well rely on a drawing if they buy from China factory
#1 one day and China factory #2 the next with a different design in each.
:)
Can I shoot PDF or DWG drawings to you with a "fill in the blanks" type feel
to them? If so, e-mail me direct.
Thanks!
Regards,
Joe Agro, Jr.
(800) 871-5022
01.908.542.0244
Automatic / Pneumatic Drills: http://www.AutoDrill.com
Multiple Spindle Drills: http://www.Multi-Drill.com
V8013-R
"Gary Owens" <[email protected]> wrote in message
news:[email protected]...
> I've got one, what measurements do you need ? 1.574 one way, 1.573 the
> other (its HF what do you expect)
> gary owens
> Deltona, FL
>
>
> "Joe AutoDrill" <[email protected]> wrote in message
> news:vXYqj.111947$U12.67218@trnddc06...
>> Looking for some measurements on this machine:
>>
>> HEAVY DUTY 16 SPEED BENCH DRILL PRESS [13-7/8'' SWING]
>> http://www.harborfreight.com/cpi/ctaf/displayitem.taf?Itemnumber=38142
>>
>> Will gladly send you a $25 check if you can assist! Need micrometer or
>> excellent caliper skills to get measurement of quill to .001" for me...
>> Plus some other numbers.
>>
>> Thank you for any help you can offer!
>>
>> Regards,
>> Joe Agro, Jr.
>> (800) 871-5022
>> 01.908.542.0244
>> Automatic / Pneumatic Drills: http://www.AutoDrill.com
>> Multiple Spindle Drills: http://www.Multi-Drill.com
>>
>> V8013-R
>>
>>
>>
>
Joe AutoDrill wrote:
> Looking for some measurements on this machine:
>
> HEAVY DUTY 16 SPEED BENCH DRILL PRESS [13-7/8'' SWING]
> http://www.harborfreight.com/cpi/ctaf/displayitem.taf?Itemnumber=38142
Hey Joe,
I suggest dialing 1-800-444-3353 and ask them.
http://www.harborfreight.com/manuals/38000-38999/38142.PDF
--Winston