I have a rather large stack of cherry, maple and a few odds and ends
mixed in. 4/4 and 8/4. Moving and can't take it with me. Most boards
are 8-10" wide with some 10' long or better. Cherry has been air
drying for about 3 years. Because of the weight I would think two
pickup loads. Email me directly if interested. Local Tucson AZ pickup
only. Thanks.
Jim mumbled the following on 6/5/2005 12:51 AM:
> I have a rather large stack of cherry, maple and a few odds and ends
> mixed in. 4/4 and 8/4. Moving and can't take it with me. Most boards
> are 8-10" wide with some 10' long or better. Cherry has been air
> drying for about 3 years. Because of the weight I would think two
> pickup loads. Email me directly if interested. Local Tucson AZ pickup
> only. Thanks.
>
I have a pickemup and a trailer, but I'm way too far.
--
Odinn
RCOS #7
SENS(less)
SLUG
"The more I study religions the more I am convinced that man never
worshipped anything but himself." -- Sir Richard Francis Burton
Reeky's unofficial homepage ... http://www.reeky.org
'03 FLHTI ........... http://www.sloanclan.org/gallery/ElectraGlide
'97 VN1500D ......... http://www.sloanclan.org/gallery/VulcanClassic
Atlanta Biker Net ... http://www.atlantabiker.net
Vulcan Riders Assoc . http://www.vulcanriders.org
rot13 [email protected] to reply
on 6/6/2005 9:46 AM bremen68 mumbled something about the following:
> Ya know it's posts like this that bring a tear to my eye...............
>
> BECAUSE I'M TO BLOODY FAR AWAY!!!!!
>
I wouldn't consider 500 miles too far (that's what I did for about 700
bd ft of oak and maple), but 1800 miles is just pushing it a little bit :)
--
Odinn
RCOS #7
SENS(less)
SLUG
"The more I study religions the more I am convinced that man never
worshipped anything but himself." -- Sir Richard Francis Burton
Reeky's unofficial homepage ... http://www.reeky.org
'03 FLHTI ........... http://www.sloanclan.org/gallery/ElectraGlide
'97 VN1500D ......... http://www.sloanclan.org/gallery/VulcanClassic
Atlanta Biker Net ... http://www.atlantabiker.net
Vulcan Riders Assoc . http://www.vulcanriders.org
rot13 [email protected] to reply
on 6/6/2005 12:36 PM mac davis mumbled something about the following:
> On Mon, 06 Jun 2005 10:46:31 -0400, Odinn <[email protected]> wrote:
>
>
>>on 6/6/2005 9:46 AM bremen68 mumbled something about the following:
>>
>>>Ya know it's posts like this that bring a tear to my eye...............
>>>
>>>BECAUSE I'M TO BLOODY FAR AWAY!!!!!
>>>
>>
>>I wouldn't consider 500 miles too far (that's what I did for about 700
>>bd ft of oak and maple), but 1800 miles is just pushing it a little bit :)
>
>
> yeah.. I briefly considered the trip from Central Calif, but 800+ miles each
> way, with both trucks, is a bit much..
Yup, that would be almost as much as my 1800 miles with truck and
trailer. Just a bit much
--
Odinn
RCOS #7
SENS(less)
SLUG
"The more I study religions the more I am convinced that man never
worshipped anything but himself." -- Sir Richard Francis Burton
Reeky's unofficial homepage ... http://www.reeky.org
'03 FLHTI ........... http://www.sloanclan.org/gallery/ElectraGlide
'97 VN1500D ......... http://www.sloanclan.org/gallery/VulcanClassic
Atlanta Biker Net ... http://www.atlantabiker.net
Vulcan Riders Assoc . http://www.vulcanriders.org
rot13 [email protected] to reply
On 6 Jun 2005 06:46:43 -0700, "bremen68" <[email protected]>
wrote:
>Ya know it's posts like this that bring a tear to my eye...............
>
>BECAUSE I'M TO BLOODY FAR AWAY!!!!!
I'm here but it didn't do me any good. No response to two emails. :(
On Mon, 06 Jun 2005 10:46:31 -0400, Odinn <[email protected]> wrote:
>on 6/6/2005 9:46 AM bremen68 mumbled something about the following:
>> Ya know it's posts like this that bring a tear to my eye...............
>>
>> BECAUSE I'M TO BLOODY FAR AWAY!!!!!
>>
>I wouldn't consider 500 miles too far (that's what I did for about 700
>bd ft of oak and maple), but 1800 miles is just pushing it a little bit :)
yeah.. I briefly considered the trip from Central Calif, but 800+ miles each
way, with both trucks, is a bit much..
mac
Please remove splinters before emailing