My wife and kids have bought me a unisaw for my momentous birthday. I just
realized that this will be the first landmark birthday of mine for which I
have no hope of living to twice my age.
Anyway, I will have to wire my shop for 220. The first time in 34+ years
that I have been forced to put 220 into my shop. My brother is a power
engineer, so I will enlist him for the details to the breaker panel, but
what type of plug should I use (if you can point me to photos, I would like
to see them) and, while I am at it, what do you all recommend for the size
of the breaker? I would like to get started before I am allowed to open the
package.
Any other suggestions for someone in my position would be appreciated.
"Eric Anderson" <[email protected]> wrote in message
news:[email protected]...
> My wife and kids have bought me a unisaw for my momentous birthday. I
just
> realized that this will be the first landmark birthday of mine for which I
> have no hope of living to twice my age.
>
> Anyway, I will have to wire my shop for 220. The first time in 34+ years
> that I have been forced to put 220 into my shop. My brother is a power
> engineer, so I will enlist him for the details to the breaker panel, but
> what type of plug should I use (if you can point me to photos, I would
like
> to see them) and, while I am at it, what do you all recommend for the size
> of the breaker? I would like to get started before I am allowed to open
the
> package.
>
> Any other suggestions for someone in my position would be appreciated.
>
>
The HP ratings of the motor will dictate the plug and recepticle, wire and
curcuit breaker to use. If you don't plan on ever moving it you could just
hard wire it in.
Greg
Kill switch good idea. It's also a good idea to review your existing power
tools and consider taking them to 220V as well.
The plugs and receptacles are labeled, and you already have help on wiring
who knows that.
"patriarch [email protected]>" <<patriarch> wrote in message
news:[email protected]...
> > In article <[email protected]>,
> > "Eric Anderson" <[email protected]> wrote:
> >> Anyway, I will have to wire my shop for 220. The first time in 34+
> >> years that I have been forced to put 220 into my shop.
>
> While you're fussing around in the power panel, investigate whether it is
> feasible to put in a master tools circuits kill switch, for everything
> except the lights (and the freezer.) When I leave on a trip, I can now
> lock out the power to the big tools, and avoid trouble that way. Kids,
> even adult ones, sometimes have the funniest notion of what's OK in dad's
> shop, when I'm gone.
I suggest to you that a 10 foot cord might not be long enough,
depending on where you locate the saw and if you have a movable base,
etc. What I did was buy a 20 foot 12ga heavy duty extension cord at
the Home Despot, cut off the 110 plug and socket, and hard wire one
end into the beast and put a 220v 20a plug on the other. Buying the
extension cord and the new plug is cheaper than buying the plain wire
and plug.
Mutt
"Eric Anderson" <[email protected]> wrote in message news:<[email protected]>...
> I opened up the box enough to find that it does have a plug on about a 10 ft
> cord. The plug is a 15 amp plug (thanks Roy Smith for the URL to describe
> them). I went to Home Depot to get a sub-panel, breakers and wiring I will
> need. I will have a 20 amp breaker in the sub-panel coming from a 50 amp
> breaker in the main panel.
>
> Hey, I looked at the blade that came on the Unisaw. Couldn't believe it.
> It is an OLD steel blade (not carbide tipped). I was very surprised. I
> think I would have just not put a blade on the Unisaw rather than to put on
> a blade that isn't as good as my standard blades of 30 years ago.
>
>
> "Greg O" <[email protected]> wrote in message
> news:[email protected]...
> >
> > "Eric Anderson" <[email protected]> wrote in message
> > news:[email protected]...
> > > My wife and kids have bought me a unisaw for my momentous birthday. I
> just
> > > realized that this will be the first landmark birthday of mine for which
> I
> > > have no hope of living to twice my age.
> > >
> > > Anyway, I will have to wire my shop for 220. The first time in 34+
> years
> > > that I have been forced to put 220 into my shop. My brother is a power
> > > engineer, so I will enlist him for the details to the breaker panel, but
> > > what type of plug should I use (if you can point me to photos, I would
> like
> > > to see them) and, while I am at it, what do you all recommend for the
> size
> > > of the breaker? I would like to get started before I am allowed to open
> the
> > > package.
> >
> > The HP ratings of the motor will dictate the plug and recepticle, wire and
> > curcuit breaker to use. > Greg
> >
> >
Actually I don't know that I have ever bought any 240 (my brother corrected
me and that is the MODERN designation) volt equipment before. Seems like I
saw a thread in the group in the past where it was implied that someone had
purchased a 240 volt tool that came without a plug and there was a
discussion on what type of plug to use. If you-all think that it comes with
a plug, then I guess I should check what type it is (since there are several
possibilities, I understand). My brother looked up what type of breaker I
should use. He feels, since I am going to have a plug on the line, that the
breaker on the line should be 35 amps. He said that if it was hard wired as
a motor connection, the NEC rules consider that the thermal breaker in the
motor is part of the overload safety system and the line can be 30 amps (as
a minimum).
In talking to my brother, I find that I have only 150 amp service (the
breaker in the panel is 150 amps). He was somewhat surprised. He has 200
amp service. He suggested and I am thinking that I might buy a subpanel.
That would allow me to separate my lines a little more if I want to in the
future.
"Robert Galloway" <[email protected]> wrote in message
news:[email protected]...
> 220 volt equip minus a plug? Every buy a window air conditioner wired
> for 220?
>
> bob g.
>
> Eric Anderson wrote:
>
> > Thanks for the info guys. I was surprised to hear that there is a plug
on
> > the Unisaw. I kind of heard that all 220 volt equipment came without a
> > plug. In fact (now that I think about it) I believe a friend of mine
that
> > got a Unisaw had some confusion as to what plug to get for his saw.
Well, I
> > guess I will find out when I open the thing.
> >
> > "George" <george@least> wrote in message
> > news:[email protected]...
> >
> >>Kill switch good idea. It's also a good idea to review your existing
> >
> > power
> >
> >>tools and consider taking them to 220V as well.
> >>
> >>The plugs and receptacles are labeled, and you already have help on
wiring
> >>who knows that.
> >>
> >>"patriarch [email protected]>" <<patriarch> wrote in message
> >>news:[email protected]...
> >>
> >>>>In article <[email protected]>,
> >>>> "Eric Anderson" <[email protected]> wrote:
> >>>>
> >>>>>Anyway, I will have to wire my shop for 220. The first time in 34+
> >>>>>years that I have been forced to put 220 into my shop.
> >>
> >>>While you're fussing around in the power panel, investigate whether it
> >
> > is
> >
> >>>feasible to put in a master tools circuits kill switch, for everything
> >>>except the lights (and the freezer.) When I leave on a trip, I can now
> >>>lock out the power to the big tools, and avoid trouble that way. Kids,
> >>>even adult ones, sometimes have the funniest notion of what's OK in
> >
> > dad's
> >
> >>>shop, when I'm gone.
> >>
> >>
> >
> >
Oops!
I just checked my breaker box to see what I need to do to put in an extra
220v line. I have 28 of the 30 positions filled. Also, I will have to move
one of the breakers over to the other side to put in a 220 volt breaker.
Somehow I feel uncomfortable having every position filled, but it would seem
like quite a job to put in another breaker panel. Also, is that code
without doing something else. Maybe I should test my brother on this.
I opened up the box enough to find that it does have a plug on about a 10 ft
cord. The plug is a 15 amp plug (thanks Roy Smith for the URL to describe
them). I went to Home Depot to get a sub-panel, breakers and wiring I will
need. I will have a 20 amp breaker in the sub-panel coming from a 50 amp
breaker in the main panel.
Hey, I looked at the blade that came on the Unisaw. Couldn't believe it.
It is an OLD steel blade (not carbide tipped). I was very surprised. I
think I would have just not put a blade on the Unisaw rather than to put on
a blade that isn't as good as my standard blades of 30 years ago.
"Greg O" <[email protected]> wrote in message
news:[email protected]...
>
> "Eric Anderson" <[email protected]> wrote in message
> news:[email protected]...
> > My wife and kids have bought me a unisaw for my momentous birthday. I
> just
> > realized that this will be the first landmark birthday of mine for which
I
> > have no hope of living to twice my age.
> >
> > Anyway, I will have to wire my shop for 220. The first time in 34+
years
> > that I have been forced to put 220 into my shop. My brother is a power
> > engineer, so I will enlist him for the details to the breaker panel, but
> > what type of plug should I use (if you can point me to photos, I would
> like
> > to see them) and, while I am at it, what do you all recommend for the
size
> > of the breaker? I would like to get started before I am allowed to open
> the
> > package.
>
> The HP ratings of the motor will dictate the plug and recepticle, wire and
> curcuit breaker to use. > Greg
>
>
Eric Anderson wrote:
> Oops!
>
> I just checked my breaker box to see what I need to do to put in an extra
> 220v line. I have 28 of the 30 positions filled. Also, I will have to move
> one of the breakers over to the other side to put in a 220 volt breaker.
> Somehow I feel uncomfortable having every position filled, but it would seem
> like quite a job to put in another breaker panel. Also, is that code
> without doing something else. Maybe I should test my brother on this.
>
There are half-height breakers you can use to free up some space. Keep
in mind, another panel doesn't mean more current to your house, just
more breakers. Check your local code, the half heights should be ok.
JOE
220 volt equip minus a plug? Every buy a window air conditioner wired
for 220?
bob g.
Eric Anderson wrote:
> Thanks for the info guys. I was surprised to hear that there is a plug on
> the Unisaw. I kind of heard that all 220 volt equipment came without a
> plug. In fact (now that I think about it) I believe a friend of mine that
> got a Unisaw had some confusion as to what plug to get for his saw. Well, I
> guess I will find out when I open the thing.
>
> "George" <george@least> wrote in message
> news:[email protected]...
>
>>Kill switch good idea. It's also a good idea to review your existing
>
> power
>
>>tools and consider taking them to 220V as well.
>>
>>The plugs and receptacles are labeled, and you already have help on wiring
>>who knows that.
>>
>>"patriarch [email protected]>" <<patriarch> wrote in message
>>news:[email protected]...
>>
>>>>In article <[email protected]>,
>>>> "Eric Anderson" <[email protected]> wrote:
>>>>
>>>>>Anyway, I will have to wire my shop for 220. The first time in 34+
>>>>>years that I have been forced to put 220 into my shop.
>>
>>>While you're fussing around in the power panel, investigate whether it
>
> is
>
>>>feasible to put in a master tools circuits kill switch, for everything
>>>except the lights (and the freezer.) When I leave on a trip, I can now
>>>lock out the power to the big tools, and avoid trouble that way. Kids,
>>>even adult ones, sometimes have the funniest notion of what's OK in
>
> dad's
>
>>>shop, when I'm gone.
>>
>>
>
>
Roy Smith <[email protected]> wrote in
news:[email protected]:
> In article <[email protected]>,
> "Eric Anderson" <[email protected]> wrote:
>
>> My wife and kids have bought me a unisaw for my momentous birthday.
>> I just realized that this will be the first landmark birthday of mine
>> for which I have no hope of living to twice my age.
>>
>> Anyway, I will have to wire my shop for 220. The first time in 34+
>> years that I have been forced to put 220 into my shop. My brother is
>> a power engineer, so I will enlist him for the details to the breaker
>> panel, but what type of plug should I use (if you can point me to
>> photos, I would like to see them) and, while I am at it, what do you
>> all recommend for the size of the breaker? I would like to get
>> started before I am allowed to open the package.
>>
>> Any other suggestions for someone in my position would be
>> appreciated.
>
> One answer is "buy whatever receptacle fits the plug that came on the
> saw". If I had to guess, I would guess it was a 6-15P, a picture of
> which can be found at http://www.quail.com/nema.cfm. This plug can be
> inserted into either of two receptacles; a 6-15R, or a 6-20R.
>
> The difference between the two is that the 6-15R is designed to supply
> a maximum of 15A, while the 6-20R can supply 20A. A typical 6-15R
> installation would use #14 wire protected by a 15A circuit breaker
> (I'm assuming relatively short wire runs such as are likely to be
> found in a home shop). A 6-20R would typically use #12 wire and a 20A
> breaker.
>
> I personally can see no reason to install the lower capacity circuit.
> The receptacles themselves cost the same, as do the breakers. The
> heavier wire is only nominally more expensive (pennies a foot). The
> labor to install either is identical. The saw will run just fine on
> either the 15A or 20A circuit, but since putting the 20A circuit in
> won't cost any more, there's no reason not to do it. Someday in the
> future, you might need the bigger circuit for something, and then
> you'll be kicking yourself for not having put it in.
>
> A couple of caveats. First, there may be some code issues specific to
> your location that might preclude installing the 20A circuit. I can't
> think of what they might be, but anything is possible when government
> beaurocracies are involved. Second, I'm just assuming your saw came
> with a 6-15P attached. It's possible it came with a different plug,
> or even no plug at all (you get to attach your own, or hard-wire it).
> In that case, consult your electrician for advice.
>
This is way more information than I could determine when I bought my saw a
couple of years ago. So I had my electrician wire for 30A.
The plug on the saw came in looking like 6-15P or 6-30P. I still don't
know the difference, from the pictures. We made up the heaviest duty,
locking plug extension cord we could from the components at the really good
local hardware store. Makes it really easy to make sure power is OFF when
I'm changing blades, or something else, down inside the saw.
While you're fussing around in the power panel, investigate whether it is
feasible to put in a master tools circuits kill switch, for everything
except the lights (and the freezer.) When I leave on a trip, I can now
lock out the power to the big tools, and avoid trouble that way. Kids,
even adult ones, sometimes have the funniest notion of what's OK in dad's
shop, when I'm gone.
Enjoy your new gift!
Patriarch
"Eric Anderson" <[email protected]> wrote in
news:[email protected]:
<snip>
> In talking to my brother, I find that I have only 150 amp service (the
> breaker in the panel is 150 amps). He was somewhat surprised. He has
> 200 amp service. He suggested and I am thinking that I might buy a
> subpanel. That would allow me to separate my lines a little more if I
> want to in the future.
I think the sub panel is an excellent idea, since you have the expert
helping you now.
When you need to 'add a little' later, it becomes much easier to do.
Patriarch,
who believes that all wooddorkers want 'just one more circuit'...
Hi,
Lowes has a "workshop panel" kit that makes it easy to add a subpanel
for your shop. If you are down to your last 2 spots, you can use them
up for your Unisaw, or use them to add a whole new panel. I added a
subpanel a couple of months ago using this kit, and it was simple. The
code enforcement guy checked it out (took all of 5 minutes), and gave
it his blessing. Total cost about US$150, including subpanel, wire,
conduit, and the permit.
Lewis
Thanks for the info guys. I was surprised to hear that there is a plug on
the Unisaw. I kind of heard that all 220 volt equipment came without a
plug. In fact (now that I think about it) I believe a friend of mine that
got a Unisaw had some confusion as to what plug to get for his saw. Well, I
guess I will find out when I open the thing.
"George" <george@least> wrote in message
news:[email protected]...
> Kill switch good idea. It's also a good idea to review your existing
power
> tools and consider taking them to 220V as well.
>
> The plugs and receptacles are labeled, and you already have help on wiring
> who knows that.
>
> "patriarch [email protected]>" <<patriarch> wrote in message
> news:[email protected]...
> > > In article <[email protected]>,
> > > "Eric Anderson" <[email protected]> wrote:
> > >> Anyway, I will have to wire my shop for 220. The first time in 34+
> > >> years that I have been forced to put 220 into my shop.
>
> >
> > While you're fussing around in the power panel, investigate whether it
is
> > feasible to put in a master tools circuits kill switch, for everything
> > except the lights (and the freezer.) When I leave on a trip, I can now
> > lock out the power to the big tools, and avoid trouble that way. Kids,
> > even adult ones, sometimes have the funniest notion of what's OK in
dad's
> > shop, when I'm gone.
>
>
In article <[email protected]>,
"Eric Anderson" <[email protected]> wrote:
> My wife and kids have bought me a unisaw for my momentous birthday. I just
> realized that this will be the first landmark birthday of mine for which I
> have no hope of living to twice my age.
>
> Anyway, I will have to wire my shop for 220. The first time in 34+ years
> that I have been forced to put 220 into my shop. My brother is a power
> engineer, so I will enlist him for the details to the breaker panel, but
> what type of plug should I use (if you can point me to photos, I would like
> to see them) and, while I am at it, what do you all recommend for the size
> of the breaker? I would like to get started before I am allowed to open the
> package.
>
> Any other suggestions for someone in my position would be appreciated.
One answer is "buy whatever receptacle fits the plug that came on the
saw". If I had to guess, I would guess it was a 6-15P, a picture of
which can be found at http://www.quail.com/nema.cfm. This plug can be
inserted into either of two receptacles; a 6-15R, or a 6-20R.
The difference between the two is that the 6-15R is designed to supply a
maximum of 15A, while the 6-20R can supply 20A. A typical 6-15R
installation would use #14 wire protected by a 15A circuit breaker (I'm
assuming relatively short wire runs such as are likely to be found in a
home shop). A 6-20R would typically use #12 wire and a 20A breaker.
I personally can see no reason to install the lower capacity circuit.
The receptacles themselves cost the same, as do the breakers. The
heavier wire is only nominally more expensive (pennies a foot). The
labor to install either is identical. The saw will run just fine on
either the 15A or 20A circuit, but since putting the 20A circuit in
won't cost any more, there's no reason not to do it. Someday in the
future, you might need the bigger circuit for something, and then you'll
be kicking yourself for not having put it in.
A couple of caveats. First, there may be some code issues specific to
your location that might preclude installing the 20A circuit. I can't
think of what they might be, but anything is possible when government
beaurocracies are involved. Second, I'm just assuming your saw came
with a 6-15P attached. It's possible it came with a different plug, or
even no plug at all (you get to attach your own, or hard-wire it). In
that case, consult your electrician for advice.
I don't see the wisdom of keeping a couple of spaces "open". The
manufacturer sized the thing to handle "x" number of breakers. The odds
that all the circuits will be at capacity at one time and taxing the
panel seem low. If you've got something you want to plug in and you're
holding back a couple of slots... seems like a waste. If you have
something more you want a circuit for later, you have to add a panel or
delete something you're using now. Meantime...
bob g.
Eric Anderson wrote:
> Oops!
>
> I just checked my breaker box to see what I need to do to put in an extra
> 220v line. I have 28 of the 30 positions filled. Also, I will have to move
> one of the breakers over to the other side to put in a 220 volt breaker.
> Somehow I feel uncomfortable having every position filled, but it would seem
> like quite a job to put in another breaker panel. Also, is that code
> without doing something else. Maybe I should test my brother on this.
>
>