Try Baer Lumber in Cedar Grove, NJ.
Regards,
Joe Agro, Jr.
http://www.autodrill.com
http://www.multi-spindle-heads.com
V8013
"U-CDK_CHARLES\Charles" <"Charles Krug"@aol.com> wrote in message
news:6XPmd.13929$2V4.4276@trndny06...
> Wreckers:
>
> Does anyone know anyone who STOCKS cherry veneer plywood in NW NJ or NE
> PA? I'm in Newton. I'm willing to drive an hour, so Middleton NY is
> okay, but not Albany NY or Lancaster PA . . .
>
> Thanx
>
>
> Charles
>
In article <6XPmd.13929$2V4.4276@trndny06>, U-CDK_CHARLES\Charles wrote:
> Wreckers:
>
> Does anyone know anyone who STOCKS cherry veneer plywood in NW NJ or NE
> PA? I'm in Newton. I'm willing to drive an hour, so Middleton NY is
> okay, but not Albany NY or Lancaster PA . . .
Condon Lumber in White Plains, NY. Far side of the Tapanzee bridge from
you, off of 287.
http://www.willardbrothers.net ... I don't know if they HAVE it, but
they can certainly order it .. in fact, I'll bet any kitchen place
that does its own cabinet construction could order it.
On Sat, 27 Nov 2004 12:04:56 -0500, "Norman D. Crow"
<[email protected]> wrote:
>
>
>
>"U-CDK_CHARLES\Charles" <"Charles Krug"@aol.com> wrote in message
>news:6XPmd.13929$2V4.4276@trndny06...
>> Wreckers:
>>
>> Does anyone know anyone who STOCKS cherry veneer plywood in NW NJ or NE
>> PA? I'm in Newton. I'm willing to drive an hour, so Middleton NY is
>> okay, but not Albany NY or Lancaster PA . . .
>
>South Plainfield too far? This goes back to early '90's, but they're still
>listed on the net.
>
>http://www.arcat.com/arcatcos/cos32/arc32162.cfm
>
>"Eagle Plywood" was one of the co. suppliers when I drove for HBSA Ind., who
>manufactured high end store fixtures, showcases, etc. They have all kinds of
>veneered plywood, and stack upon stack of exotic veneers. Might give them a
>try.
>
>--
>Nahmie
>The law of intelligent tinkering: save all the parts.
>
>
If I had a really good sig file statement, this is where it would be.
[email protected] (Jim Galvin) wrote in message news:<[email protected]>...
> Ed Clarke <[email protected]> wrote in message news:<[email protected]>...
> > In article <6XPmd.13929$2V4.4276@trndny06>, U-CDK_CHARLES\Charles wrote:
> > > Wreckers:
> > >
> > > Does anyone know anyone who STOCKS cherry veneer plywood in NW NJ or NE
> > > PA? I'm in Newton. I'm willing to drive an hour, so Middleton NY is
> > > okay, but not Albany NY or Lancaster PA . . .
> >
> > Condon Lumber in White Plains, NY. Far side of the Tapanzee bridge from
> > you, off of 287.
>
> Try
>
> US Mahogany
>
> Matawan NJ
>
You could also try Bayway Lumber in Bayonne, Exit 14A off the Turnpike
Ed Clarke <[email protected]> wrote in message news:<[email protected]>...
> In article <6XPmd.13929$2V4.4276@trndny06>, U-CDK_CHARLES\Charles wrote:
> > Wreckers:
> >
> > Does anyone know anyone who STOCKS cherry veneer plywood in NW NJ or NE
> > PA? I'm in Newton. I'm willing to drive an hour, so Middleton NY is
> > okay, but not Albany NY or Lancaster PA . . .
>
> Condon Lumber in White Plains, NY. Far side of the Tapanzee bridge from
> you, off of 287.
Try
US Mahogany
Matawan NJ
Right off GSP 117
Got some great cherry plywood with curl last time I was there
I usually buy my lumber from Monteath Lumber in Old Bridge, NJ.
(monteath.com) They have quite a variety of lumber and carry various
veneered plywood. Spoke to them once in the Spring about cherry veneered
ply my brother wanted. They had it then.
"Ed Clarke" <[email protected]> wrote in message
news:[email protected]...
> In article <6XPmd.13929$2V4.4276@trndny06>, U-CDK_CHARLES\Charles wrote:
> > Wreckers:
> >
> > Does anyone know anyone who STOCKS cherry veneer plywood in NW NJ or NE
> > PA? I'm in Newton. I'm willing to drive an hour, so Middleton NY is
> > okay, but not Albany NY or Lancaster PA . . .
>
> Condon Lumber in White Plains, NY. Far side of the Tapanzee bridge from
> you, off of 287.
On Wed, 17 Nov 2004 22:05:54 GMT, U-CDK_CHARLES\Charles <Charles
[email protected]> wrote:
> Wreckers:
>
> Does anyone know anyone who STOCKS cherry veneer plywood in NW NJ or NE
> PA? I'm in Newton. I'm willing to drive an hour, so Middleton NY is
> okay, but not Albany NY or Lancaster PA . . .
>
Welp, all those are farther than I care to drive.
BUT Excelsior (listed as "Jump Lumber" still) in Newton will deliver it
to my inlaws (where I do millwork on Christmas presents)
"Yeah, this here says we have two pieces . .go on back to the shed . ."
Shed Worker: "They said What? Where? Um . . .well . . . " *digs
through some piles of what looks like 1/4" Cherry veneer . . .
So Bob is, if not literally my Uncle, at least passingly familiar with
me and not unkind.
"U-CDK_CHARLES\Charles" <"Charles Krug"@aol.com> wrote in message
news:6XPmd.13929$2V4.4276@trndny06...
> Wreckers:
>
> Does anyone know anyone who STOCKS cherry veneer plywood in NW NJ or NE
> PA? I'm in Newton. I'm willing to drive an hour, so Middleton NY is
> okay, but not Albany NY or Lancaster PA . . .
South Plainfield too far? This goes back to early '90's, but they're still
listed on the net.
http://www.arcat.com/arcatcos/cos32/arc32162.cfm
"Eagle Plywood" was one of the co. suppliers when I drove for HBSA Ind., who
manufactured high end store fixtures, showcases, etc. They have all kinds of
veneered plywood, and stack upon stack of exotic veneers. Might give them a
try.
--
Nahmie
The law of intelligent tinkering: save all the parts.
In Aberdeen NJ (exit 117A on Parkway) US Mahogany carries it.
Also ? (sorry can't recall the name of the lumber yard, perhaps someones
else can) on E Hanover Ave in Morristown, NJ carries it
Ken
"Norman D. Crow" <[email protected]> wrote in message
news:[email protected]...
>
>
>
> "U-CDK_CHARLES\Charles" <"Charles Krug"@aol.com> wrote in message
> news:6XPmd.13929$2V4.4276@trndny06...
> > Wreckers:
> >
> > Does anyone know anyone who STOCKS cherry veneer plywood in NW NJ or NE
> > PA? I'm in Newton. I'm willing to drive an hour, so Middleton NY is
> > okay, but not Albany NY or Lancaster PA . . .
>
> South Plainfield too far? This goes back to early '90's, but they're still
> listed on the net.
>
> http://www.arcat.com/arcatcos/cos32/arc32162.cfm
>
> "Eagle Plywood" was one of the co. suppliers when I drove for HBSA Ind.,
who
> manufactured high end store fixtures, showcases, etc. They have all kinds
of
> veneered plywood, and stack upon stack of exotic veneers. Might give them
a
> try.
>
> --
> Nahmie
> The law of intelligent tinkering: save all the parts.
>
>