I bought a new 5 gal. pail of Thompsons the other day to finish my
deck, I opened it up and its milky! What gives my other (older) single gal
is clear fluid. The look of the pail is the same but the product seems to
have changed.
Any ideas on this. I don't like the milky product, I tested it on a concrete
section of my patio and it is now blotchy. Yet a section of the patio done
with the older pail looks fine.
Searcher
On Sun, 08 Oct 2017 16:14:36 -0500, Markem <[email protected]>
wrote:
>On Sun, 08 Oct 2017 14:39:46 -0400, J. Clarke
><[email protected]> wrote:
>
>>On Sun, 8 Oct 2017 08:07:46 -0700 (PDT), Steve <[email protected]>
>>wrote:
>>
>>>On Saturday, October 7, 2017 at 8:03:20 PM UTC-4, G Ross wrote:
>>>> Dusty wrote:
>>>
>>>> >
>>>> >
>>>> Shopdog wrote that 11 years ago. Since then the deck has rotted and gone.
>>>>
>>>> --
>>>> G Ross
>>>
>>>G Ross, I laughed about this, because 11 years ago, yes, Thompson's already sucked... and then they made it 'suck worse" when the VOC laws got changed. Most of us saw those products infiltrate the stores in early 2011, regardless of whose brand... paints, primers, stains all affected.
>>>
>>> http://www.paintdirect.com/voc_regulations.htm
>>>
>>>So, regardless of timing, 2006 or 2013, both posters were correct... and as Dusty noted this month, they certainly remain correct today. Thompson's hasn't been right since about 1997 or so.
>>>
>>>Look for Cabot's Australian Timber Oil for a transparent (or lightly tinted) product that does today what Thompson's used to do then. Yes, even this has gone downhill based on the VOC terrain, but it's still a high quality oil blend, compared to the other crap on the market today.
>>>
>>>General Finishes makes a nice outdoor oil, too... but be advised it's pricey. I don't suspect that the people looking for Thompson at around $60 for a fiver want to pay for General at around $25 a quart, but it's a quality product and worth a mention. I use it on cedar trellises and maybe a bench or table or two, a bench or two, not on my entire deck surface.
>>
>>I think we need a Constitutional amendment to the effect that if
>>Congress is going to ban something they have to first come up with an
>>equally effective alternative that doesn't come at ridiculous cost. Or
>>just remove their power to ban anything.
>
>Or just get California to quit doing it.
Getting California to do something sane? Are you nuts? ;-)
Shopdog wrote:
> I bought a new 5 gal. pail of Thompsons the other day to finish my
> deck, I opened it up and its milky! What gives my other (older) single gal
> is clear fluid. The look of the pail is the same but the product seems to
> have changed.
> Any ideas on this. I don't like the milky product, I tested it on a concrete
> section of my patio and it is now blotchy. Yet a section of the patio done
> with the older pail looks fine.
>
> Searcher
>
>
I would also ask about their recommendations for use on a pop-up camper.
I assume you are going to use it on the canvas part. The old Thompson's
water seal was essentially paraffin dissolved in mineral spirits or
something similar. I don't know about the new type.
In my day, we tried to firePROOF canvas that we used over our heads, not
make a candle out of it with wax.
Maybe I'm out of my head with assumptions. It's one of my afflictions.
--
Gerald Ross
Cochran, GA
A professor is one who talks in
someone else's sleep.
----== Posted via Newsfeeds.Com - Unlimited-Unrestricted-Secure Usenet News==----
http://www.newsfeeds.com The #1 Newsgroup Service in the World! 120,000+ Newsgroups
----= East and West-Coast Server Farms - Total Privacy via Encryption =----
Shopdog wrote:
> ok, I just got off the phone with Thompsons, I was told that in my region
> due to EPA regs they are not allow to ship solvent based product. So, they
> now make the water seal with a water base. It was always safe to use as the
> solvent evaporated over a few days when it was solvent based and they say
> that now since it is water based it is even more safe to use.
She was referring to the risk of fire and explosion when applying the
product. The old product was wax dissolved in a fammable solvent.
The new product is something (possibly wax and an emulsifier)
dissolved in a nonflammable solvent.
Unless the dissolved solids in the new product are non-combustable,
and I don't think that there are any noncombustable waxes, using it
on canvas will still increase the fire risk associated with the
water-prooofed
aterial just as with the old product.
It may be possible to use the MSDS to deduce the material deposited
on the canvas.
--
FF
Del Cecchi wrote:
> <[email protected]> wrote in message
> news:[email protected]...
> >
> > Shopdog wrote:
> >> ok, I just got off the phone with Thompsons, I was told that in my
> >> region
> >> due to EPA regs they are not allow to ship solvent based product. So,
> >> they
> >> now make the water seal with a water base. It was always safe to use
> >> as the
> >> solvent evaporated over a few days when it was solvent based and they
> >> say
> >> that now since it is water based it is even more safe to use.
> >
> > She was referring to the risk of fire and explosion when applying the
> > product. The old product was wax dissolved in a fammable solvent.
> > The new product is something (possibly wax and an emulsifier)
> > dissolved in a nonflammable solvent.
> >
> > Unless the dissolved solids in the new product are non-combustable,
> > and I don't think that there are any noncombustable waxes, using it
> > on canvas will still increase the fire risk associated with the
> > water-prooofed
> > aterial just as with the old product.
> >
> > It may be possible to use the MSDS to deduce the material deposited
> > on the canvas.
> >
> All that solvent evaporating pollutes the air.
Yes, that is why the volotile organic content of virtually all finishes
has
been drastically reduced in recent years.
> Some places can't handle
> the extra. The EPA is not concerned with your safety.
Of course they are. Reducing air polution is a human safety issue.
--
FF
On Thursday, September 21, 2006 at 8:10:50 AM UTC-7, mac davis wrote:
> On Thu, 21 Sep 2006 14:02:04 GMT, "Shopdog" <[email protected]> wrote:
>
> >ok, I just got off the phone with Thompsons, I was told that in my region
> >due to EPA regs they are not allow to ship solvent based product. So, they
> >now make the water seal with a water base...
> Hmmm... a water based product to waterproof wood....
> Sort of like "how do they get teflon to stick to the damn pan?
It's the best way to deliver waterproofing, actually; the active stuff washes
into all the same places that water will attempt to enter.
One gallon of water as a vehicle, and after drying, hundreds of gallons of
rain just can't get in.
"Shopdog" <[email protected]> wrote in news:AFiQg.127$Fh.91@trnddc07:
> I bought a new 5 gal. pail of Thompsons the other day to finish
> my
> deck, I opened it up and its milky! What gives my other (older) single
> gal is clear fluid. The look of the pail is the same but the product
> seems to have changed.
> Any ideas on this. I don't like the milky product, I tested it on a
> concrete section of my patio and it is now blotchy. Yet a section of
> the patio done with the older pail looks fine.
>
> Searcher
>
>
It's probably bad. Take it back for an exchange.
Puckdropper
--
Wise is the man who attempts to answer his question before asking it.
To email me directly, send a message to puckdropper (at) fastmail.fm
"Jim Northey" <[email protected]> wrote in news:_aFQg.10616$R63.5883
@pd7urf1no:
>
> "mac davis" <[email protected]> wrote in message
> news:[email protected]...
>> On Thu, 21 Sep 2006 14:02:04 GMT, "Shopdog" <[email protected]> wrote:
>>
>> Hmmm... a water based product to waterproof wood....
>> Sort of like "how do they get teflon to stick to the damn pan?
>>
>> Mac
>>
>> https://home.comcast.net/~mac.davis
>> https://home.comcast.net/~mac.davis/wood_stuff.htm
>
> A bit of glue and a few brads..... y'all know the rest. :-)
> Jim
>
>
>
"How did you get this grey tape-like finish? It must have taken a long
time."
Puckdropper
--
Wise is the man who attempts to answer his question before asking it.
To email me directly, send a message to puckdropper (at) fastmail.fm
<[email protected]> wrote in message
news:[email protected]...
>
> Shopdog wrote:
>> ok, I just got off the phone with Thompsons, I was told that in my
>> region
>> due to EPA regs they are not allow to ship solvent based product. So,
>> they
>> now make the water seal with a water base. It was always safe to use
>> as the
>> solvent evaporated over a few days when it was solvent based and they
>> say
>> that now since it is water based it is even more safe to use.
>
> She was referring to the risk of fire and explosion when applying the
> product. The old product was wax dissolved in a fammable solvent.
> The new product is something (possibly wax and an emulsifier)
> dissolved in a nonflammable solvent.
>
> Unless the dissolved solids in the new product are non-combustable,
> and I don't think that there are any noncombustable waxes, using it
> on canvas will still increase the fire risk associated with the
> water-prooofed
> aterial just as with the old product.
>
> It may be possible to use the MSDS to deduce the material deposited
> on the canvas.
>
> --
>
> FF
All that solvent evaporating pollutes the air. Some places can't handle
the extra. The EPA is not concerned with your safety.
On Sun, 8 Oct 2017 08:07:46 -0700 (PDT), Steve <[email protected]>
wrote:
>So, regardless of timing, 2006 or 2013, both posters were correct..
Thompson was real good attracting a nice layer of "protective dirt",
just cause they say it good does not mean it is. "They" being
marketing department.
replying to Shopdog, Dusty wrote:
My husband just screamed about that too!!! The old can is oil based the new
stuff is water based... looks like they changed the formula... he hates it!!!!
--
for full context, visit https://www.homeownershub.com/woodworking/what-happened-tothompsons-water-seal-336849-.htm
OK, I will try the suggestions, but I know that the one that I bought was in
fact not a bad product, because I went to the store and opend another
container (1 gal) and it too was milky. Also, I am looking for a clear
liquid water proofer or sealer, not for wood or concrete but I used to use
the Thompsons for my pop up camper. It soaked right in and worked great for
5 years, its now time for another treatment but I sure don't want to spray
on a milky substance and I DON"T want to pay crazy money for "specialized"
treatment for canvas. Hell for 12 bucks I could treat my camper and my tents
and still have enough left over for any other camping gear that needed it.
Searcher
Thu, Sep 21, 2006, 1:22am (EDT+4) [email protected] (Shopdog) doth mumble:
OK, I will try the suggestions, but I know that the one that I bought
was in fact not a bad product, <snip>
What you were "told" is that there are superior products to
Thopsons. There are several in fact. And call the 1-800 number like
your were also tols.
JOAT
I am not paranoid. I do not "think" people are after me. I "know" damn
well they're after me.
On 10/8/2017 10:07 AM, Steve wrote:
> On Saturday, October 7, 2017 at 8:03:20 PM UTC-4, G Ross wrote:
>> Dusty wrote:
>
>>>
>>>
>> Shopdog wrote that 11 years ago. Since then the deck has rotted and gone.
>>
>> --
>> G Ross
>
> G Ross, I laughed about this, because 11 years ago, yes, Thompson's already sucked... and then they made it 'suck worse" when the VOC laws got changed. Most of us saw those products infiltrate the stores in early 2011, regardless of whose brand... paints, primers, stains all affected.
>
> http://www.paintdirect.com/voc_regulations.htm
>
> So, regardless of timing, 2006 or 2013, both posters were correct... and as Dusty noted this month, they certainly remain correct today. Thompson's hasn't been right since about 1997 or so.
>
> Look for Cabot's Australian Timber Oil for a transparent (or lightly tinted) product that does today what Thompson's used to do then. Yes, even this has gone downhill based on the VOC terrain, but it's still a high quality oil blend, compared to the other crap on the market today.
>
> General Finishes makes a nice outdoor oil, too... but be advised it's pricey. I don't suspect that the people looking for Thompson at around $60 for a fiver want to pay for General at around $25 a quart, but it's a quality product and worth a mention. I use it on cedar trellises and maybe a bench or table or two, a bench or two, not on my entire deck surface.
>
While $25 a quart for General Finishes outdoor oil is high it is
probably available in gallon and five gallon buckets. These type
products tend to only double in price with each next increment. A
gallon would probably be closer to $50 than $100.
https://www.amazon.com/General-Finishes-Outdoor-Oil-Gallon/dp/B001DSZY2M/ref=sr_1_2?ie=UTF8&qid=1507555252&sr=8-2&keywords=general+finishes+outdoor+oil
Some unsolicited advice, try another brand. I used Thompsons several times
on my deck and found it not very durable. I had to reapply pretty much
every other year. The last stain I used was Cabot, which was much better.
I don't remember when I applied it, but it has been about 5 years and it
still looks better than the Thompson's did in 2.
-Steve W
"Shopdog" <[email protected]> wrote in message
news:AFiQg.127$Fh.91@trnddc07...
> I bought a new 5 gal. pail of Thompsons the other day to finish my
> deck, I opened it up and its milky! What gives my other (older) single gal
> is clear fluid. The look of the pail is the same but the product seems to
> have changed.
> Any ideas on this. I don't like the milky product, I tested it on a
> concrete section of my patio and it is now blotchy. Yet a section of the
> patio done with the older pail looks fine.
>
> Searcher
>
>
"mac davis" <[email protected]> wrote in message
news:[email protected]...
> On Thu, 21 Sep 2006 14:02:04 GMT, "Shopdog" <[email protected]> wrote:
>
> Hmmm... a water based product to waterproof wood....
> Sort of like "how do they get teflon to stick to the damn pan?
>
> Mac
>
> https://home.comcast.net/~mac.davis
> https://home.comcast.net/~mac.davis/wood_stuff.htm
A bit of glue and a few brads..... y'all know the rest. :-)
Jim
On Sat, 07 Oct 2017 21:44:02 GMT, Dusty
<[email protected]> wrote:
>replying to Shopdog, Dusty wrote:
>My husband just screamed about that too!!! The old can is oil based the new
>stuff is water based... looks like they changed the formula... he hates it!!!!
It can't be any worse that the original.
On Thu, 10 Oct 2013 10:10:45 -0400, willshak <[email protected]>
wrote:
>>>
>>> I bought a new 5 gal. pail of Thompsons the other day to finish
>>> my deck, I opened it up and its milky! What gives my other (older)
>>> single gal is clear fluid.
>>
>> From the Thompsons site:
>> Apply by brush, roller, dipping, or sprayer. A garden "pump-up" style
>> sprayer is the simplest method. Product will appear milky white during
>> application, but will dry clear. If puddling of product occurs, remove
>> within 15 minutes by redistributing to dry areas or wiping off.
>>
>
>Original Question from Homeowners hub site is dated Sept. 20, 2006
>That's 7 years ago.
OK, its time for a re-coat and maybe he forgot the answer in the
meantime. I rarely look at the date so a regurgitated post can get by
me too.
replying to Shopdog, Delia wrote:
> lookout wrote:
>
> I bought a new 5 gal. pail of Thompsons the other day to finish my
> deck, I opened it up and its milky! What gives my other (older) single gal
> is clear fluid. The look of the pail is the same but the product seems to
> have changed.
> Any ideas on this. I don't like the milky product, I tested it on a
concrete
> section of my patio and it is now blotchy. Yet a section of the patio done
> with the older pail looks fine.
> Searcher
From the Thompsons site:
Apply by brush, roller, dipping, or sprayer. A garden "pump-up" style
sprayer is the simplest method. Product will appear milky white during
application, but will dry clear. If puddling of product occurs, remove
within 15 minutes by redistributing to dry areas or wiping off.
--
posted from
http://www.homeownershub.com/woodworking/what-happened-tothompsons-water-seal-336849-.htm
using HomeOwnersHub's Web, RSS and Social Media Interface
to home and garden related groups
On Saturday, October 7, 2017 at 8:03:20 PM UTC-4, G Ross wrote:
> Dusty wrote:
> >
> >
> Shopdog wrote that 11 years ago. Since then the deck has rotted and gone=
.
>=20
> --=20
> G Ross
G Ross, I laughed about this, because 11 years ago, yes, Thompson's alread=
y sucked... and then they made it 'suck worse" when the VOC laws got change=
d. Most of us saw those products infiltrate the stores in early 2011, rega=
rdless of whose brand... paints, primers, stains all affected. =20
http://www.paintdirect.com/voc_regulations.htm
So, regardless of timing, 2006 or 2013, both posters were correct... and a=
s Dusty noted this month, they certainly remain correct today. Thompson=
's hasn't been right since about 1997 or so.=20
Look for Cabot's Australian Timber Oil for a transparent (or lightly tinted=
) product that does today what Thompson's used to do then. Yes, even this=
has gone downhill based on the VOC terrain, but it's still a high quality=
oil blend, compared to the other crap on the market today. =20
General Finishes makes a nice outdoor oil, too... but be advised it's pric=
ey. I don't suspect that the people looking for Thompson at around $60 fo=
r a fiver want to pay for General at around $25 a quart, but it's a quality=
product and worth a mention. I use it on cedar trellises and maybe a benc=
h or table or two, a bench or two, not on my entire deck surface.=20
On Sun, 08 Oct 2017 14:39:46 -0400, J. Clarke
<[email protected]> wrote:
>On Sun, 8 Oct 2017 08:07:46 -0700 (PDT), Steve <[email protected]>
>wrote:
>
>>On Saturday, October 7, 2017 at 8:03:20 PM UTC-4, G Ross wrote:
>>> Dusty wrote:
>>
>>> >
>>> >
>>> Shopdog wrote that 11 years ago. Since then the deck has rotted and gone.
>>>
>>> --
>>> G Ross
>>
>>G Ross, I laughed about this, because 11 years ago, yes, Thompson's already sucked... and then they made it 'suck worse" when the VOC laws got changed. Most of us saw those products infiltrate the stores in early 2011, regardless of whose brand... paints, primers, stains all affected.
>>
>> http://www.paintdirect.com/voc_regulations.htm
>>
>>So, regardless of timing, 2006 or 2013, both posters were correct... and as Dusty noted this month, they certainly remain correct today. Thompson's hasn't been right since about 1997 or so.
>>
>>Look for Cabot's Australian Timber Oil for a transparent (or lightly tinted) product that does today what Thompson's used to do then. Yes, even this has gone downhill based on the VOC terrain, but it's still a high quality oil blend, compared to the other crap on the market today.
>>
>>General Finishes makes a nice outdoor oil, too... but be advised it's pricey. I don't suspect that the people looking for Thompson at around $60 for a fiver want to pay for General at around $25 a quart, but it's a quality product and worth a mention. I use it on cedar trellises and maybe a bench or table or two, a bench or two, not on my entire deck surface.
>
>I think we need a Constitutional amendment to the effect that if
>Congress is going to ban something they have to first come up with an
>equally effective alternative that doesn't come at ridiculous cost. Or
>just remove their power to ban anything.
Or just get California to quit doing it.
On Sun, 8 Oct 2017 08:07:46 -0700 (PDT), Steve <[email protected]>
wrote:
>On Saturday, October 7, 2017 at 8:03:20 PM UTC-4, G Ross wrote:
>> Dusty wrote:
>
>> >
>> >
>> Shopdog wrote that 11 years ago. Since then the deck has rotted and gone.
>>
>> --
>> G Ross
>
>G Ross, I laughed about this, because 11 years ago, yes, Thompson's already sucked... and then they made it 'suck worse" when the VOC laws got changed. Most of us saw those products infiltrate the stores in early 2011, regardless of whose brand... paints, primers, stains all affected.
>
> http://www.paintdirect.com/voc_regulations.htm
>
>So, regardless of timing, 2006 or 2013, both posters were correct... and as Dusty noted this month, they certainly remain correct today. Thompson's hasn't been right since about 1997 or so.
>
>Look for Cabot's Australian Timber Oil for a transparent (or lightly tinted) product that does today what Thompson's used to do then. Yes, even this has gone downhill based on the VOC terrain, but it's still a high quality oil blend, compared to the other crap on the market today.
>
>General Finishes makes a nice outdoor oil, too... but be advised it's pricey. I don't suspect that the people looking for Thompson at around $60 for a fiver want to pay for General at around $25 a quart, but it's a quality product and worth a mention. I use it on cedar trellises and maybe a bench or table or two, a bench or two, not on my entire deck surface.
I think we need a Constitutional amendment to the effect that if
Congress is going to ban something they have to first come up with an
equally effective alternative that doesn't come at ridiculous cost. Or
just remove their power to ban anything.
On Sun, 08 Oct 2017 17:33:54 -0400, [email protected] wrote:
>On Sun, 08 Oct 2017 16:14:36 -0500, Markem <[email protected]>
>wrote:
>
>>On Sun, 08 Oct 2017 14:39:46 -0400, J. Clarke
>><[email protected]> wrote:
>>
>>>On Sun, 8 Oct 2017 08:07:46 -0700 (PDT), Steve <[email protected]>
>>>wrote:
>>>
>>>>On Saturday, October 7, 2017 at 8:03:20 PM UTC-4, G Ross wrote:
>>>>> Dusty wrote:
>>>>
>>>>> >
>>>>> >
>>>>> Shopdog wrote that 11 years ago. Since then the deck has rotted and gone.
>>>>>
>>>>> --
>>>>> G Ross
>>>>
>>>>G Ross, I laughed about this, because 11 years ago, yes, Thompson's already sucked... and then they made it 'suck worse" when the VOC laws got changed. Most of us saw those products infiltrate the stores in early 2011, regardless of whose brand... paints, primers, stains all affected.
>>>>
>>>> http://www.paintdirect.com/voc_regulations.htm
>>>>
>>>>So, regardless of timing, 2006 or 2013, both posters were correct... and as Dusty noted this month, they certainly remain correct today. Thompson's hasn't been right since about 1997 or so.
>>>>
>>>>Look for Cabot's Australian Timber Oil for a transparent (or lightly tinted) product that does today what Thompson's used to do then. Yes, even this has gone downhill based on the VOC terrain, but it's still a high quality oil blend, compared to the other crap on the market today.
>>>>
>>>>General Finishes makes a nice outdoor oil, too... but be advised it's pricey. I don't suspect that the people looking for Thompson at around $60 for a fiver want to pay for General at around $25 a quart, but it's a quality product and worth a mention. I use it on cedar trellises and maybe a bench or table or two, a bench or two, not on my entire deck surface.
>>>
>>>I think we need a Constitutional amendment to the effect that if
>>>Congress is going to ban something they have to first come up with an
>>>equally effective alternative that doesn't come at ridiculous cost. Or
>>>just remove their power to ban anything.
>>
>>Or just get California to quit doing it.
>
>Getting California to do something sane? Are you nuts? ;-)
Nah the glass is half empty on that.
Delia wrote:
> replying to Shopdog, Delia wrote:
>> lookout wrote:
>>
>> I bought a new 5 gal. pail of Thompsons the other day to finish
>> my deck, I opened it up and its milky! What gives my other (older)
>> single gal is clear fluid. The look of the pail is the same but the
>> product seems to have changed.
>> Any ideas on this. I don't like the milky product, I tested it on a
> concrete
>> section of my patio and it is now blotchy. Yet a section of the patio
>> done with the older pail looks fine.
>> Searcher
>
>
> From the Thompsons site:
> Apply by brush, roller, dipping, or sprayer. A garden "pump-up" style
> sprayer is the simplest method. Product will appear milky white during
> application, but will dry clear. If puddling of product occurs, remove
> within 15 minutes by redistributing to dry areas or wiping off.
>
Original Question from Homeowners hub site is dated Sept. 20, 2006
That's 7 years ago.
--
Bill
In Hamptonburgh, NY
In the original Orange County. Est. 1683
To email, remove the double zeros after @
On Sun, 06 Oct 2013 21:44:01 +0000, Delia
<[email protected]> wrote:
>replying to Shopdog, Delia wrote:
>> lookout wrote:
>>
>> I bought a new 5 gal. pail of Thompsons the other day to finish my
>> deck, I opened it up and its milky! What gives my other (older) single gal
>> is clear fluid. The look of the pail is the same but the product seems to
>> have changed.
>> Any ideas on this. I don't like the milky product, I tested it on a
>concrete
>> section of my patio and it is now blotchy. Yet a section of the patio done
>> with the older pail looks fine.
>> Searcher
>
>
>From the Thompsons site:
>Apply by brush, roller, dipping, or sprayer. A garden "pump-up" style
>sprayer is the simplest method. Product will appear milky white during
>application, but will dry clear. If puddling of product occurs, remove
>within 15 minutes by redistributing to dry areas or wiping off.
The old formula doesn't pass the "greenies test". The new stuff is
not as good as the old stuff, but it is legal to sell and use without
a Hazmat licence.
On Thu, 21 Sep 2006 14:02:04 GMT, "Shopdog" <[email protected]> wrote:
>ok, I just got off the phone with Thompsons, I was told that in my region
>due to EPA regs they are not allow to ship solvent based product. So, they
>now make the water seal with a water base. It was always safe to use as the
>solvent evaporated over a few days when it was solvent based and they say
>that now since it is water based it is even more safe to use. Although, the
>area to be treated MUST be completely moisture free.
>
>As soon I started the conversation I was stopped in my tracks, the woman
>said that everyone has been calling about the milky white product!
>
>Searcher
>
Hmmm... a water based product to waterproof wood....
Sort of like "how do they get teflon to stick to the damn pan?
Mac
https://home.comcast.net/~mac.davis
https://home.comcast.net/~mac.davis/wood_stuff.htm
"Shopdog" <[email protected]> writes:
> I bought a new 5 gal. pail of Thompsons the other day to finish my
>deck, I opened it up and its milky! What gives my other (older) single gal
>is clear fluid. The look of the pail is the same but the product seems to
>have changed.
>Any ideas on this. I don't like the milky product, I tested it on a concrete
>section of my patio and it is now blotchy. Yet a section of the patio done
>with the older pail looks fine.
>
>Searcher
>
>
Take a look at the side of the 5 gallon pail. Look for a toll free
telephone number. Ask the kind person who answers why the product
is milky, and they'll be more than happy to answer your question.
scott
ok, I just got off the phone with Thompsons, I was told that in my region
due to EPA regs they are not allow to ship solvent based product. So, they
now make the water seal with a water base. It was always safe to use as the
solvent evaporated over a few days when it was solvent based and they say
that now since it is water based it is even more safe to use. Although, the
area to be treated MUST be completely moisture free.
As soon I started the conversation I was stopped in my tracks, the woman
said that everyone has been calling about the milky white product!
Searcher