On Sun, 6 Mar 2005 17:09:04 -0800, "joey" <[email protected]> wrote:
>Hi
>I have read references here to buying quality foam brushes. Question is who
>sells them? I have purchased the 24 packs from Rockler and they seam to fall
>apart spreading anything thicker than water.
>Thanks
>Joey
>
The wooden handled foam brushes are the best. A local hardwood
supplier has 'em. I've found the plastic handled foam brushes are
terrible.
Thunder
"joey" writes:
>I have read references here to buying quality foam brushes. Question is
>who
>sells them? I have purchased the 24 packs from Rockler and they seam to
>fall
>apart spreading anything thicker than water.
What kind of material are you trying to spread?
You can't use them on laminating resins.
They will dissolve before your eyes when immersed in hydrocarbon solvents.
Forget trying to clean them, they are a single use item.
Lew
"joey" <[email protected]> wrote in message
news:[email protected]...
> Hi
> I have read references here to buying quality foam brushes. Question is
> who
> sells them? I have purchased the 24 packs from Rockler and they seam to
> fall
> apart spreading anything thicker than water.
> Thanks
> Joey
A decent foam brush will cost a couple of dollars each. Considering that
they are basically throw away, they are really quite expensive compared to a
good quality brush. However they are fantastic for applying oil based
varnishes. FWIW, Rockler told me that they sell the cheapo kind and the
better kind. The cheapos will melt in thinner. Beware those brushes that
are warn to no use with oil based products.
I get good ones at HD and Lowe's.
"Lew Hodgett" <[email protected]> wrote in message
news:[email protected]...
> "joey" writes:
>
>
> >I have read references here to buying quality foam brushes. Question is
> >who
> >sells them? I have purchased the 24 packs from Rockler and they seam to
> >fall
> >apart spreading anything thicker than water.
>
>
> What kind of material are you trying to spread?
>
> You can't use them on laminating resins.
>
> They will dissolve before your eyes when immersed in hydrocarbon solvents.
>
> Forget trying to clean them, they are a single use item.
>
> Lew
>
>
>
Shoulda been more specific. The pad pulls off the handle when trying to
use with say a poly. They work ok for putting on Waterlox. Guess I'm using
them where not aappropiate
J oe