A friend worked at the airport and gave this to me.
It was confiscated by customs from a South American flight.
Has been ambiently air dried over time.
Very hard, very heavy.
I can barely make a pin head sized hole by pushing a center push into it
with my palm.
The piece 41" x 6" x 1-5/8" weighs 13.5lbs.
http://www.mikedrums.com/mysterywood1.jpg
http://www.mikedrums.com/mysterywood2.jpg
Yes, that reddish/maroon tint is accurate.
Rosewood?
--
-MIKE-
"Playing is not something I do at night, it's my function in life"
--Elvin Jones (1927-2004)
--
http://mikedrums.com
[email protected]
---remove "DOT" ^^^^ to reply
In article <[email protected]>, -MIKE- <[email protected]> wrote:
>A friend worked at the airport and gave this to me.
>It was confiscated by customs from a South American flight.
>
>Has been ambiently air dried over time.
>Very hard, very heavy.
>I can barely make a pin head sized hole by pushing a center push into it
>with my palm.
>The piece 41" x 6" x 1-5/8" weighs 13.5lbs.
>
>http://www.mikedrums.com/mysterywood1.jpg
>http://www.mikedrums.com/mysterywood2.jpg
>
>Yes, that reddish/maroon tint is accurate.
>
>Rosewood?
Looks more like bubinga to me; OTOH, most bubinga is African, not S.
American.
On Nov 16, 10:32=A0pm, -MIKE- <[email protected]> wrote:
> A friend worked at the airport and gave this to me.
> It was confiscated by customs from a South American flight.
Don't rule out Afromosia. I have some Afromosia that looks identical
to the color and grain pattern of the smaller piece in the picture. I
built a bed out of it years ago. One thing I remember about it was
the distinctive taste the sawdust had. I got a good taste of it from
the very fine dust that flew when I cut it on the table saw. Dense
and very hard.
Thanks to DiggerOp for posting the wood picture i.d. site. Nice site,
but the picture of Afromosia is lighter and not as strongly grained as
the samples I had.
Morris Dovey wrote:
> -MIKE- wrote:
>> A friend worked at the airport and gave this to me.
>> It was confiscated by customs from a South American flight.
>>
>> Has been ambiently air dried over time.
>> Very hard, very heavy.
>> I can barely make a pin head sized hole by pushing a center push into
>> it with my palm.
>> The piece 41" x 6" x 1-5/8" weighs 13.5lbs.
>>
>> http://www.mikedrums.com/mysterywood1.jpg
>> http://www.mikedrums.com/mysterywood2.jpg
>>
>> Yes, that reddish/maroon tint is accurate.
>>
>> Rosewood?
>
> How about ipé <http://en.wikipedia.org/wiki/Tabebuia> ?
>
If it looks like ipe, walks like ipe and quacks like ipe...
How DO I get myself into these things?
twitch,
jo4hn
On Nov 17, 12:07=A0am, "DiggerOp" <[email protected]> wrote:
> "-MIKE-" <[email protected]> wrote in message
>
> news:[email protected]...
>
>
>
> >> How about ip=E9 <http://en.wikipedia.org/wiki/Tabebuia> ?
>
> > At one time I had a bookmark for a great website that has image
> > samples
> > of just about every species of wood known to man.
> > If anyone has a link like that, pass it on.
>
> This is one .....
>
> http://www.hobbithouseinc.com/personal/woodpics/
>
> Hundreds of wood types, thousands of pictures
That is just intense! What a find, thanks!
-MIKE- wrote:
> A friend worked at the airport and gave this to me.
> It was confiscated by customs from a South American flight.
>
> Has been ambiently air dried over time.
> Very hard, very heavy.
> I can barely make a pin head sized hole by pushing a center push into it
> with my palm.
> The piece 41" x 6" x 1-5/8" weighs 13.5lbs.
>
> http://www.mikedrums.com/mysterywood1.jpg
> http://www.mikedrums.com/mysterywood2.jpg
>
> Yes, that reddish/maroon tint is accurate.
>
> Rosewood?
How about ipé <http://en.wikipedia.org/wiki/Tabebuia> ?
--
Morris Dovey
DeSoto Solar
DeSoto, Iowa USA
http://www.iedu.com/DeSoto/
"-MIKE-" <[email protected]> wrote in message
news:[email protected]...
>>
>> How about ipé <http://en.wikipedia.org/wiki/Tabebuia> ?
>>
>
> At one time I had a bookmark for a great website that has image
> samples
> of just about every species of wood known to man.
> If anyone has a link like that, pass it on.
>
>
This is one .....
http://www.hobbithouseinc.com/personal/woodpics/
Hundreds of wood types, thousands of pictures
In article <[email protected]>, [email protected]
says...
> KIMOSABE wrote:
> >> Don't rule out Afromosia.
> > ===============================
> >
> > ======================
> > Check out afromosia: http://www.hobbithouseinc.com/personal/woodpics/afrormosia.htm
>
>
> Thanks you and the other guy who suggested afrormosia.
> I would guess it's something else since it came from South America and
> all sources point to afrormosia being African, bit you never know.
>
> On a side note,
> I read some commentary on that site in which the author complains that
> digital pics show too much red in their photos, making it difficult to tell
> what color a wood sample really is.
>
> I'm having the opposite problem, my camera won't show how much red there
> really is in this wood.
The light seems very yellow or maybe green.
I'm a half-assed photographer but, shooting it on a matte, dark, neutral
background in diffuse daylight or using a diffused flash might answer
all needs.
In article <[email protected]>, phorbin1
@yahoo.com says...
> In article <[email protected]>, [email protected]
> says...
> > KIMOSABE wrote:
> > >> Don't rule out Afromosia.
> > > ===============================
> > >
> > > ======================
> > > Check out afromosia: http://www.hobbithouseinc.com/personal/woodpics/afrormosia.htm
> >
> >
> > Thanks you and the other guy who suggested afrormosia.
> > I would guess it's something else since it came from South America and
> > all sources point to afrormosia being African, bit you never know.
> >
> > On a side note,
> > I read some commentary on that site in which the author complains that
> > digital pics show too much red in their photos, making it difficult to tell
> > what color a wood sample really is.
> >
> > I'm having the opposite problem, my camera won't show how much red there
> > really is in this wood.
>
>
> The light seems very yellow or maybe green.
>
> I'm a half-assed photographer but, shooting it on a matte, dark, neutral
> background in diffuse daylight or using a diffused flash might answer
> all needs.
I said this without looking at the other pic.
The blowout on the upper right and shadowed edge of the board suggests
backlighting. A window?
If it's a window, you might try the suggestions above from the other
side, using the window as your light source.
"-MIKE-" <[email protected]> wrote in message
news:[email protected]...
>A friend worked at the airport and gave this to me.
> It was confiscated by customs from a South American flight.
>
> Has been ambiently air dried over time.
> Very hard, very heavy.
> I can barely make a pin head sized hole by pushing a center push into it
> with my palm.
> The piece 41" x 6" x 1-5/8" weighs 13.5lbs.
>
> http://www.mikedrums.com/mysterywood1.jpg
> http://www.mikedrums.com/mysterywood2.jpg
>
> Yes, that reddish/maroon tint is accurate.
>
> Rosewood?
>
>
Looks like Ipe. Ipe often has a very fine dust that will look green in
color, not to be confused with the brownish saw dust. Also if you get a
citrus cleaner on the dust it will turn blood red. CMT Formula 2050 blade
and bit cleaner will turn the dust blood red as does my sweat sometimes.
>
> How about ipé <http://en.wikipedia.org/wiki/Tabebuia> ?
>
At one time I had a bookmark for a great website that has image samples
of just about every species of wood known to man.
If anyone has a link like that, pass it on.
--
-MIKE-
"Playing is not something I do at night, it's my function in life"
--Elvin Jones (1927-2004)
--
http://mikedrums.com
[email protected]
---remove "DOT" ^^^^ to reply
DiggerOp wrote:
> This is one .....
>
> http://www.hobbithouseinc.com/personal/woodpics/
>
> Hundreds of wood types, thousands of pictures
>
sumbich, that might the one.
thanks a lot
--
-MIKE-
"Playing is not something I do at night, it's my function in life"
--Elvin Jones (1927-2004)
--
http://mikedrums.com
[email protected]
---remove "DOT" ^^^^ to reply
>> http://www.mikedrums.com/mysterywood1.jpg
>> http://www.mikedrums.com/mysterywood2.jpg
>>
>>
>
> Looks like Ipe. Ipe often has a very fine dust that will look green in
> color, not to be confused with the brownish saw dust. Also if you get a
> citrus cleaner on the dust it will turn blood red. CMT Formula 2050 blade
> and bit cleaner will turn the dust blood red as does my sweat sometimes.
>
I haven't tried that, but the sawdust and burn marks are very purple and
pink.
It's very similar to Purpleheart...... no, it's not Purpleheart.
--
-MIKE-
"Playing is not something I do at night, it's my function in life"
--Elvin Jones (1927-2004)
--
http://mikedrums.com
[email protected]
---remove "DOT" ^^^^ to reply
KIMOSABE wrote:
>> Don't rule out Afromosia.
> ===============================
>
> ======================
> Check out afromosia:
> http://www.hobbithouseinc.com/personal/woodpics/afrormosia.htm
If it really matters then cut a sample and send it to FPL
http://www2.fpl.fs.fed.us/WoodID/idfact.html.
--
--
--John
to email, dial "usenet" and validate
(was jclarke at eye bee em dot net)
KIMOSABE wrote:
>> Don't rule out Afromosia.
> ===============================
>
> ======================
> Check out afromosia: http://www.hobbithouseinc.com/personal/woodpics/afrormosia.htm
Thanks you and the other guy who suggested afrormosia.
I would guess it's something else since it came from South America and
all sources point to afrormosia being African, bit you never know.
On a side note,
I read some commentary on that site in which the author complains that
digital pics show too much red in their photos, making it difficult to tell
what color a wood sample really is.
I'm having the opposite problem, my camera won't show how much red there
really is in this wood.
--
-MIKE-
"Playing is not something I do at night, it's my function in life"
--Elvin Jones (1927-2004)
--
http://mikedrums.com
[email protected]
---remove "DOT" ^^^^ to reply
J. Clarke wrote:
> KIMOSABE wrote:
>>> Don't rule out Afromosia.
>> ===============================
>>
>> ======================
>> Check out afromosia:
>> http://www.hobbithouseinc.com/personal/woodpics/afrormosia.htm
>
> If it really matters then cut a sample and send it to FPL
> http://www2.fpl.fs.fed.us/WoodID/idfact.html.
>
That is very cool. Thanks for that link.
My enthusiasm is tempered however, considering that we are already
paying for the service.
I think I'll send in a piece of southern yellow pine, to see if they
have a sense of humor.
--
-MIKE-
"Playing is not something I do at night, it's my function in life"
--Elvin Jones (1927-2004)
--
http://mikedrums.com
[email protected]
---remove "DOT" ^^^^ to reply
Doug Miller wrote:
> Looks more like bubinga to me; OTOH, most bubinga is African, not S.
> American.
Thanks, Doug.
I've worked with Bubinga and this is quite different.
--
-MIKE-
"Playing is not something I do at night, it's my function in life"
--Elvin Jones (1927-2004)
--
http://mikedrums.com
[email protected]
---remove "DOT" ^^^^ to reply
Doug Miller wrote:
>> Thanks, Doug.
>> I've worked with Bubinga and this is quite different.
>
> Then I'm baffled. :-) Pics don't look like anything else that I've ever worked
> with.
You and I, both. This is kind of fun though.
I'm learning a lot about species identification and a lot about
how UNreliable web photos on a computer screen can be.
--
-MIKE-
"Playing is not something I do at night, it's my function in life"
--Elvin Jones (1927-2004)
--
http://mikedrums.com
[email protected]
---remove "DOT" ^^^^ to reply
phorbin wrote:
>>> I'm having the opposite problem, my camera won't show how much red there
>>> really is in this wood.
>>
>> The light seems very yellow or maybe green.
>>
>> I'm a half-assed photographer but, shooting it on a matte, dark, neutral
>> background in diffuse daylight or using a diffused flash might answer
>> all needs.
>
> I said this without looking at the other pic.
>
> The blowout on the upper right and shadowed edge of the board suggests
> backlighting. A window?
>
> If it's a window, you might try the suggestions above from the other
> side, using the window as your light source.
Thanks for the info.
Yes, there's a window. (duh! <-- to me)
The lights are those "daylight" florescent tubes that are supposed to be
6500k, but I still find a bit too green.
--
-MIKE-
"Playing is not something I do at night, it's my function in life"
--Elvin Jones (1927-2004)
--
http://mikedrums.com
[email protected]
---remove "DOT" ^^^^ to reply
In article <[email protected]>, -MIKE- <[email protected]> wrote:
>Doug Miller wrote:
>> Looks more like bubinga to me; OTOH, most bubinga is African, not S.
>> American.
>
>
>Thanks, Doug.
>I've worked with Bubinga and this is quite different.
Then I'm baffled. :-) Pics don't look like anything else that I've ever worked
with.