Like many of you I have my workshop located in the garage. My problem
is that when I open the door after its been raining lots of water ends
up dripping off of the door and onto my tools, any tips or tricks to
stop this from happening? The door is one of those that's split into
sections and rolls up. Big tarp just under the guide rails ?
damian penney wrote:
> Like many of you I have my workshop located in the garage. My problem
> is that when I open the door after its been raining lots of water ends
> up dripping off of the door and onto my tools, any tips or tricks to
> stop this from happening? The door is one of those that's split into
> sections and rolls up. Big tarp just under the guide rails ?
Damien,
Does this sound familiar. I live in a place in Hawaii where we get 100
to 125 inches of rain per year. And when the trade winds are blowing
the rain it even works into the joints of my insulated garage door so
that when I open the door it drips from the joints and the weatherstrip
on the bottom. What a mess it made of my TS. My solution was to
install a 12' long by 20' wide tarp over the door and under the garage
eave. The tarp is supported by a 1" EMT (metal electrical conduit)
frame and legs opposite the garage. It mostly works unless the trades
are blowing above 30 mph, when the rain is horizontal.
When it works it sure is nice to be able to open the door without
moving the equipment around.
AlohaCliff wrote:
> damian penney wrote:
> > Like many of you I have my workshop located in the garage. My problem
> > is that when I open the door after its been raining lots of water ends
> > up dripping off of the door and onto my tools, any tips or tricks to
> > stop this from happening? The door is one of those that's split into
> > sections and rolls up. Big tarp just under the guide rails ?
>
> Damien,
>
> Does this sound familiar. I live in a place in Hawaii where we get 100
> to 125 inches of rain per year. And when the trade winds are blowing
> the rain it even works into the joints of my insulated garage door so
> that when I open the door it drips from the joints and the weatherstrip
> on the bottom. What a mess it made of my TS. My solution was to
> install a 12' long by 20' wide tarp over the door and under the garage
> eave. The tarp is supported by a 1" EMT (metal electrical conduit)
> frame and legs opposite the garage. It mostly works unless the trades
> are blowing above 30 mph, when the rain is horizontal.
>
> When it works it sure is nice to be able to open the door without
> moving the equipment around.
Yeah, I think a tarp attached to the guide rails might be the way to
go. Somebody else suggested adding small gutters to the rails too, and
yes I live in California.
Someone else suggested moving the tools but with my limited space
that's not really possible (unless the wife lets me move them into the
house...)
Charlie b,
Actually I live on the north end of the Big Island (Hawaii Island). I
think they get a lot more rain on Kauai then we get here. And oh
yea... you either get into island time or you go nuts.
The only down side is EVERYTHING has to get here on a boat. I'm
looking at lathes and no one is real enthusiastic about shipping one
here.
Cliff
charlie b wrote:
> AlohaCliff wrote:
>
>
>>Does this sound familiar. I live in a place in Hawaii where we get 100
>>to 125 inches of rain per year.
>
>
> That would be Kauai right - the northeast side?
>
> My first day there I counted over 20 waterfalls - that were
> visible from the road. "I should get a photo of that." but
> I figured I could get a shot before I left. Never saw the top
> half of the mountains again, and sometimes couldn't see
> the mountains at all. Kauaiis a kickback place where the
> Hawaiian version of manana is a really easy habit to get
> into.
>
> charlie b
Called Kauai time. :-) Or island time.
mahalo,
jo4hn
"damian penney" <[email protected]> wrote in message
news:[email protected]...
> Like many of you I have my workshop located in the garage. My problem
> is that when I open the door after its been raining lots of water ends
> up dripping off of the door and onto my tools, any tips or tricks to
> stop this from happening? The door is one of those that's split into
> sections and rolls up. Big tarp just under the guide rails ?
>
Why put your tools under the door? My tip - move your tools.
--
-Mike-
[email protected]
damian penney wrote:
>
> Like many of you I have my workshop located in the garage. My problem
> is that when I open the door after its been raining lots of water ends
> up dripping off of the door and onto my tools, any tips or tricks to
> stop this from happening? The door is one of those that's split into
> sections and rolls up. Big tarp just under the guide rails ?
I'm guessing you live in California. We just had a storm with
60 to 75 mph hour winds and torrential downpours - actually
they were more like horizontal pours at times.
I had exactly the same thing happen but didn't discover
there'd been water on my Robland X31 combi saw and
jointer top 'til 24 hours later - when I had to clear the
saw table and jointer table of piles of stuff so I could
use the saw. RUST FORMS QUICKLY!
Now I'm trying to find my big squeegie and have to figure
out where to hang it - near the garage door. I really
don't want to go through the hassle of a big tool cover.
I have enough trouble with the car cover for the Miata.
charlie b
AlohaCliff wrote:
> Does this sound familiar. I live in a place in Hawaii where we get 100
> to 125 inches of rain per year.
That would be Kauai right - the northeast side?
My first day there I counted over 20 waterfalls - that were
visible from the road. "I should get a photo of that." but
I figured I could get a shot before I left. Never saw the top
half of the mountains again, and sometimes couldn't see
the mountains at all. Kauaiis a kickback place where the
Hawaiian version of manana is a really easy habit to get
into.
charlie b
in 1278762 20060301 155648 "damian penney" <[email protected]> wrote:
>Like many of you I have my workshop located in the garage. My problem
>is that when I open the door after its been raining lots of water ends
>up dripping off of the door and onto my tools
That's the reason why I replaced my up-and-over door with two
side-hinged doors (home-made, one of my first woodworking projects).
Also has the advantage that the doors can be open just a few inches when
it's cold and windy, as well as being much less effort to open and close.
damian penney wrote:
> Like many of you I have my workshop located in the garage. My problem
> is that when I open the door after its been raining lots of water ends
> up dripping off of the door and onto my tools, any tips or tricks to
> stop this from happening? The door is one of those that's split into
> sections and rolls up. Big tarp just under the guide rails ?
I have my tools on one side of the garage and I put the car in the other side.
That being said, I seldom open the far side unless the weather is fair. As for
the near side where I put the car, it doesn't matter if some water drips in when
I open that door.
When I work in the garage, I pull the car out so I have room.
Years ago, I used to watch Norm Abrahm and lust after his tools. Now I have
most of them, so when I watch NYW, I lust after all the room he has in his shop.
Never satisfied...
--
Mortimer Schnerd, RN
[email protected]
"damian penney" <[email protected]> wrote in message
news:[email protected]...
> Like many of you I have my workshop located in the garage. My problem
> is that when I open the door after its been raining lots of water ends
> up dripping off of the door and onto my tools, any tips or tricks to
> stop this from happening? The door is one of those that's split into
> sections and rolls up. Big tarp just under the guide rails ?
>
Hit or rattle the door with your hand a couple of times to knock off the
excess water before opening.
I have the similar type door however it is built to have a high insulation
rating. Water does not get past the joints.
On 1 Mar 2006 07:56:48 -0800, "damian penney" <[email protected]> wrote:
>Like many of you I have my workshop located in the garage. My problem
>is that when I open the door after its been raining lots of water ends
>up dripping off of the door and onto my tools, any tips or tricks to
>stop this from happening? The door is one of those that's split into
>sections and rolls up. Big tarp just under the guide rails ?
kind of a hassle, but if banging the door a few times doesn't get the water off
of it, how about getting in the habit of hitting it with compressed air before
opening, or something like that?
Mac
https://home.comcast.net/~mac.davis
https://home.comcast.net/~mac.davis/wood_stuff.htm