I decided to quit procrasting and build my daughter a spinning wheel.
Looked over the internet and saw a nice Saxon type wheen at
WoodCraftPlans.com. The price was not bad ($14.95) so I ordered the small
wheel and the larger one. Two things about these plans
1) They are not plans just two pages of mechanical drawings. There is no
parts layout (though there is a parts list, which has an error in it), no
detailed pictures of how things go together and no full size layout of the
indiviudal pieces AND SOME OF THIS STUFF IS CRITICAL.
2) When you call for help, Dad is willing and helpful - to a degree. Son,
who evidently now owns the business, is somewhat less so. Neither are
fully up to speed on their plans.
Just a word to the wise.
Deb
Thu, Dec 11, 2008, 7:15pm (EST-1) [email protected] (Dr.=A0Deb)
doth sayeth:
I decided to quit procrasting and build my daughter a spinning wheel.
Looked over the internet and saw a nice Saxon type wheen at
WoodCraftPlans.com. The price was not bad ($14.95) so I ordered the
small wheel and the larger one. Two things about these plans
1) They are not plans just two pages of mechanical drawings. <snip>
Just stopped by with a Christmas Card and saw this. You should
have gone to your local library. Our local library isn't huge but they
do have books with plans for spnning wheels, and the pns are free. You
do have to return the book thery're in. Or, my favorite used book store
often has books with spinning wheel plans in them. I have several books
with them. Always visit your local librry for plans first. There are
free plans on the web too, with a bit of looking.
JOAT
Where the choice is between only violence and cowardice, I would advise
violence.
- Mohandas Gandhi
"Dr. Deb" wrote:
> The first of what you refered to is correct, except on this set
> there are
> not full drawings of some critical points and you have to stop,
> study,
> figure and guess. Sometimes the most critical items are the least
> clear.
> But it is not something that you cannot work through, by taking it
> slow and
> easy.
>
> The whole reason for the original post was for to alert beginning
> woodworkers who might be looking for a set of "plans." (i.e., full
> size
> parts layout, etc.). These ain't them.
Way back when, courses in "blue print reading" were considered as an
integral part of industrial arts training.
Mechanical scale drawings were considered to be a means of written
communication between the designer and the builder.
The advent of computer technology has brought major changes to the
medium.(Isometrics and exploded views are much easier to produce)
As far as full size drawings are concerned, be pretty difficult for
anything other than small items.
OTOH, full size cross section detail drawings can be very useful.
Hope you had fun.
Lew
"Dr. Deb" wrote:
> 1) They are not plans just two pages of mechanical drawings. There
> is no
> parts layout (though there is a parts list, which has an error in
> it), no
> detailed pictures of how things go together and no full size layout
> of the
> indiviudal pieces AND SOME OF THIS STUFF IS CRITICAL.
>
> 2) When you call for help, Dad is willing and helpful - to a degree.
> Son,
> who evidently now owns the business, is somewhat less so. Neither
> are
> fully up to speed on their plans.
As a guy, who in another life, spent a fair amount of time on the
drafting board, I'm a little puzzled.
If you were provided with mechanical drawings having at least 3 views,
you have a full set of plans.
If you were expecting exploded view isometric drawings, now that is a
different can of worms.
Lew
Just a heads up...
Even though you have the parts right, and all the subassemblies
constructed to fit together....
There is a lot of art to making and using a spinning wheel. My siste
did a lot of spinning, and had to do a lot of tuning of a boughten
wheel, that was supposed to be a good one.
If you can, might be a good idea to have a spinner review the
critical parts with you.
Old Guy
On Dec 11, 7:15=A0pm, "Dr. Deb" <[email protected]> wrote:
> I decided to quit procrasting and build my daughter a spinning wheel.
> Looked over the internet and saw a nice Saxon type wheen at
> WoodCraftPlans.com. =A0The price was not bad ($14.95) so I ordered the sm=
all
> wheel and the larger one. =A0Two things about these plans
>
> 1) They are not plans just two pages of mechanical drawings. =A0There is =
no
> parts layout (though there is a parts list, which has an error in it), no
> detailed pictures of how things go together and no full size layout of th=
e
> indiviudal pieces AND SOME OF THIS STUFF IS CRITICAL. =A0
>
> 2) When you call for help, Dad is willing and helpful - to a degree. =A0S=
on,
> who evidently now owns the business, is somewhat less so. =A0Neither are
> fully up to speed on their plans.
>
> Just =A0a word to the wise.
>
> Deb
Lew Hodgett wrote:
> "Dr. Deb" wrote:
>
>> 1) They are not plans just two pages of mechanical drawings. There
>> is no
>> parts layout (though there is a parts list, which has an error in
>> it), no
>> detailed pictures of how things go together and no full size layout
>> of the
>> indiviudal pieces AND SOME OF THIS STUFF IS CRITICAL.
>>
>> 2) When you call for help, Dad is willing and helpful - to a degree.
>> Son,
>> who evidently now owns the business, is somewhat less so. Neither
>> are
>> fully up to speed on their plans.
>
> As a guy, who in another life, spent a fair amount of time on the
> drafting board, I'm a little puzzled.
>
> If you were provided with mechanical drawings having at least 3 views,
> you have a full set of plans.
>
> If you were expecting exploded view isometric drawings, now that is a
> different can of worms.
>
> Lew
Yes to the latter. I was expecting a set with all parts shown full size -
but have enough experience to figure most things out. But some things are
not intuitive, like the wheel. The joint on the wheel rim is a miter, but
the pieces are cut at 14 3/4" to make a 20 3/4" wheel. What you need to do
is lay the pieces on the drawing and figure out where to clip the corners
(which I did on the "second" set of rim pieces I cut :-( )
The first of what you refered to is correct, except on this set there are
not full drawings of some critical points and you have to stop, study,
figure and guess. Sometimes the most critical items are the least clear.
But it is not something that you cannot work through, by taking it slow and
easy.
The whole reason for the original post was for to alert beginning
woodworkers who might be looking for a set of "plans." (i.e., full size
parts layout, etc.). These ain't them.
Deb
Lew Hodgett wrote:
> "Dr. Deb" wrote:
>
>> The first of what you refered to is correct, except on this set
>> there are
>> not full drawings of some critical points and you have to stop,
>> study,
>> figure and guess. Sometimes the most critical items are the least
>> clear.
>> But it is not something that you cannot work through, by taking it
>> slow and
>> easy.
>>
>> The whole reason for the original post was for to alert beginning
>> woodworkers who might be looking for a set of "plans." (i.e., full
>> size
>> parts layout, etc.). These ain't them.
>
> Way back when, courses in "blue print reading" were considered as an
> integral part of industrial arts training.
>
> Mechanical scale drawings were considered to be a means of written
> communication between the designer and the builder.
>
> The advent of computer technology has brought major changes to the
> medium.(Isometrics and exploded views are much easier to produce)
>
> As far as full size drawings are concerned, be pretty difficult for
> anything other than small items.
>
> OTOH, full size cross section detail drawings can be very useful.
>
> Hope you had fun.
>
> Lew
Yes, and I have learned a thing or two. So, all in all, it has been a
benefical experience.
Don't get me wrong, I don't have any problem reading the drawing, it is just
that it could use a few more views for clarity.
Deb
"Dr. Deb" <[email protected]> wrote in message
> The whole reason for the original post was for to alert beginning
> woodworkers who might be looking for a set of "plans." (i.e., full size
> parts layout, etc.). These ain't them.
>
> Deb
You have to read (and understand) the fine print. If you see "measured
drawing) it is not a full size plan and will have to be scaled up using grid
paper. Like you, I prefer full sized when practical, for odd shaped or
intricate parts.
HINT: If you think you will ever make a second copy of the project, make
templates from 1/8" hardboard.