I recently saw a posting( that I have lost ) with a picture of a sanding
disk that had a bearing on the bottom for "pattern sanding". I have searched
several Tool Sites and did a "DAG" to no avail. Anyone familiar with this
attachment and a dealer/supplier. ? Could sure put this to good use! Thanks
Bill in Plano
"sparky01" wrote:
>I recently saw a posting( that I have lost ) with a picture of a
>sanding disk that had a bearing on the bottom for "pattern sanding".
>I have searched several Tool Sites and did a "DAG" to no avail.
>Anyone familiar with this attachment and a dealer/supplier. ? Could
>sure put this to good use! Thanks
-------------------------------------
Saw one on an episode of WoodSmithShop.
If all else fails, they maybe able to help point you.
Lew
This is a multi-part message in MIME format.
--------------060905040105090204000902
Content-Type: text/plain; charset=ISO-8859-1; format=flowed
Content-Transfer-Encoding: 7bit
The one I remember was called "ROBO-SANDER" .. I think it's still
available under that name as well as a few others.
On 2/8/2010 10:17 PM, sparky01 wrote:
> I recently saw a posting( that I have lost ) with a picture of a
> sanding disk that had a bearing on the bottom for "pattern sanding". I
> have searched several Tool Sites and did a "DAG" to no avail. Anyone
> familiar with this attachment and a dealer/supplier. ? Could sure put
> this to good use! Thanks
>
> Bill in Plano
--------------060905040105090204000902
Content-Type: text/html; charset=ISO-8859-1
Content-Transfer-Encoding: 7bit
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN">
<html>
<head>
<meta content="text/html; charset=ISO-8859-1"
http-equiv="Content-Type">
<title></title>
</head>
<body bgcolor="#ffffff" text="#990000">
<font size="+1"><font face="Arial Rounded MT Bold">The one I remember
was called "ROBO-SANDER" .. I think it's still available under that
name as well as a few others.</font></font><br>
<br>
On 2/8/2010 10:17 PM, sparky01 wrote:
<blockquote
cite="mid:[email protected]"
type="cite">I recently saw a posting( that I have lost ) with a
picture of a sanding disk that had a bearing on the bottom for "pattern
sanding". I have searched several Tool Sites and did a "DAG" to no
avail. Anyone familiar with this attachment and a dealer/supplier. ?
Could sure put this to good use! Thanks
<br>
<br>
Bill in Plano <br>
</blockquote>
</body>
</html>
--------------060905040105090204000902--
On 2/9/10 8:53 AM, "dadiOH" <[email protected]> wrote:
> The fact that it is a drum, not disk, probably confused Google :)
I don't know about Google, but it confused me. I had trouble even imagining
what it might be.
"sparky01" <[email protected]> wrote in message
news:[email protected]...
>
> "Lew Hodgett" <[email protected]> wrote in message
> news:[email protected]...
>>
>> "sparky01" wrote:
>>
>>>I recently saw a posting( that I have lost ) with a picture of a sanding
>>>disk that had a bearing on the bottom for "pattern sanding". I have
>>>searched several Tool Sites and did a "DAG" to no avail. Anyone familiar
>>>with this attachment and a dealer/supplier. ? Could sure put this to good
>>>use! Thanks
>>
>> -------------------------------------
>> Saw one on an episode of WoodSmithShop.
>>
>> If all else fails, they maybe able to help point you.
>>
>> Lew
>>
>>
>>Thanks Lew. We can't get "WoodSmithShop" on Verizon here in the Dallas
>>area.
> Where I saw it was on the "rec",but may have been a link!
> Bill
Thanks for all the replies!! Lew for the link toWoodsmithShop and
Morris; that is just the ticket at Eagle. I have ordered both the large and
small size. Guess my DAGS was not worded correctly :>(
Bill
"Lew Hodgett" <[email protected]> wrote in message
news:[email protected]...
>
> "sparky01" wrote:
>
>>I recently saw a posting( that I have lost ) with a picture of a sanding
>>disk that had a bearing on the bottom for "pattern sanding". I have
>>searched several Tool Sites and did a "DAG" to no avail. Anyone familiar
>>with this attachment and a dealer/supplier. ? Could sure put this to good
>>use! Thanks
>
> -------------------------------------
> Saw one on an episode of WoodSmithShop.
>
> If all else fails, they maybe able to help point you.
>
> Lew
>
>
>Thanks Lew. We can't get "WoodSmithShop" on Verizon here in the Dallas
>area.
Where I saw it was on the "rec",but may have been a link!
Bill
sparky01 wrote:
> "sparky01" <[email protected]> wrote in message
> news:[email protected]...
>>
>> "Lew Hodgett" <[email protected]> wrote in message
>> news:[email protected]...
>>>
>>> "sparky01" wrote:
>>>
>>>> I recently saw a posting( that I have lost ) with a picture of a
>>>> sanding disk that had a bearing on the bottom for "pattern
>>>> sanding". I have searched several Tool Sites and did a "DAG" to no
>>>> avail. Anyone familiar with this attachment and a dealer/supplier.
>>>> ? Could sure put this to good use! Thanks
>>>
>>> -------------------------------------
>>> Saw one on an episode of WoodSmithShop.
>>>
>>> If all else fails, they maybe able to help point you.
>>>
>>> Lew
>>>
>>>
>>> Thanks Lew. We can't get "WoodSmithShop" on Verizon here in the
>>> Dallas area.
>> Where I saw it was on the "rec",but may have been a link!
>> Bill
>
> Thanks for all the replies!! Lew for the link toWoodsmithShop and
> Morris; that is just the ticket at Eagle. I have ordered both the
> large and small size. Guess my DAGS was not worded correctly :>(
> Bill
The fact that it is a drum, not disk, probably confused Google :)
--
dadiOH
____________________________
dadiOH's dandies v3.06...
...a help file of info about MP3s, recording from
LP/cassette and tips & tricks on this and that.
Get it at http://mysite.verizon.net/xico
On Tue, 09 Feb 2010 16:13:18 GMT, "Joe" <[email protected]> wrote:
>
>"sparky01" <[email protected]> wrote in message
>news:[email protected]...
>>I recently saw a posting( that I have lost ) with a picture of a sanding
>>disk that had a bearing on the bottom for "pattern sanding". I have
>>searched several Tool Sites and did a "DAG" to no avail. Anyone familiar
>>with this attachment and a dealer/supplier. ? Could sure put this to good
>>use! Thanks
>>
>> Bill in Plano
>
>this?
>
>http://www.rockler.com/product.cfm?page=16902&filter=drum%20sand
>
>jc
>
Or search for Robo sander. Klingspor has them.
Paul F.
On 2/8/2010 9:17 PM, sparky01 wrote:
> I recently saw a posting( that I have lost ) with a picture of a sanding
> disk that had a bearing on the bottom for "pattern sanding". I have
> searched several Tool Sites and did a "DAG" to no avail. Anyone familiar
> with this attachment and a dealer/supplier. ? Could sure put this to
> good use! Thanks
I DAGS and found one for $19.99:
http://www.thefind.com/hardware/info-drill-press-sander
and might be fun to combine that with a DIY base similar to
http://www.luthiersfriend.com/
HTH!
--
Morris Dovey
DeSoto Solar
DeSoto, Iowa USA
http://www.iedu.com/DeSoto/
"sparky01" <[email protected]> wrote in message
news:[email protected]...
>I recently saw a posting( that I have lost ) with a picture of a sanding
>disk that had a bearing on the bottom for "pattern sanding". I have
>searched several Tool Sites and did a "DAG" to no avail. Anyone familiar
>with this attachment and a dealer/supplier. ? Could sure put this to good
>use! Thanks
>
> Bill in Plano
this?
http://www.rockler.com/product.cfm?page=16902&filter=drum%20sand
jc