John Grossbohlin wrote:
> "Dwight" <[email protected]> wrote in message
> news:[email protected]...
> > Anyone in the Appleton, Wi area that can cut a heigth of 8" on a band
> > saw please contact me. I have an 8' piece of wood that I need to make
> > 1/8" veneers.
>
> Wow... that's going to take a huge bandsaw... 8' throat!? Oh wait, maybe
> that's the length? ;~)
>
> John
No, that is the throat.
Dwight wrote:
> John Grossbohlin wrote:
> > "Dwight" <[email protected]> wrote in message
> > news:[email protected]...
> > > Anyone in the Appleton, Wi area that can cut a heigth of 8" on a band
> > > saw please contact me. I have an 8' piece of wood that I need to make
> > > 1/8" veneers.
> >
> > Wow... that's going to take a huge bandsaw... 8' throat!? Oh wait, maybe
> > that's the length? ;~)
> >
> > John
>
> No, that is the throat.
Maybe you should consider turning the wood on its side then! ;-)
John Grossbohlin wrote:
> "Dwight" <[email protected]> wrote in message
> news:[email protected]...
> > Anyone in the Appleton, Wi area that can cut a heigth of 8" on a band
> > saw please contact me. I have an 8' piece of wood that I need to make
> > 1/8" veneers.
>
> Wow... that's going to take a huge bandsaw... 8' throat!?
but if anybody is gonna have one, it'll be Tom.
>Oh wait, maybe
> that's the length? ;~)
>
> John
C'mon, now. Is that fair to do to anyone who aspires to be a wood-worker?
Bringing them into your shop?
:)
Clint
"Tom Plamann" <[email protected]> wrote in message
news:[email protected]...
> Dwight
>
> Call me
>
> 205-3141
>
> Tom Plamann
>
>
> "Dwight" <[email protected]> wrote in message
> news:[email protected]...
>> Anyone in the Appleton, Wi area that can cut a heigth of 8" on a band
>> saw please contact me. I have an 8' piece of wood that I need to make
>> 1/8" veneers.
>>
>> Thanks
>>
>
>
So long as it doesn't make you want to go back home, put all your tools in a
big pile, throw on a few gallons of gas, and roast marshmallows...
*tongue firmly in cheek* Seriously, if I was running around the countryside
and had an opportunity to visit his shop, I'd be all over it.
Clint
"Leon" <[email protected]> wrote in message
news:d%[email protected]...
>
> "Clint" <[email protected]> wrote in message
> news:9PlEg.7481$365.329@edtnps89...
>> C'mon, now. Is that fair to do to anyone who aspires to be a
>> wood-worker? Bringing them into your shop?
>
>
> Absolutely. LOL
>
> I cannot think of a better place to send someone regardless if he is new,
> seasoned, poor or rich. Noting but good to be seen in Tom's shop. Every
> one deserves a treat now and then. :~)
>
"Clint" <[email protected]> wrote in message
news:9PlEg.7481$365.329@edtnps89...
> C'mon, now. Is that fair to do to anyone who aspires to be a wood-worker?
> Bringing them into your shop?
Absolutely. LOL
I cannot think of a better place to send someone regardless if he is new,
seasoned, poor or rich. Noting but good to be seen in Tom's shop. Every
one deserves a treat now and then. :~)
[email protected] wrote:
> John Grossbohlin wrote:
>> "Dwight" <[email protected]> wrote in message
>> news:[email protected]...
>>> Anyone in the Appleton, Wi area that can cut a heigth of 8" on a band
>>> saw please contact me. I have an 8' piece of wood that I need to make
>>> 1/8" veneers.
>> Wow... that's going to take a huge bandsaw... 8' throat!?
>
>
> but if anybody is gonna have one, it'll be Tom.
>
>
>
>> Oh wait, maybe
>> that's the length? ;~)
>>
>> John
>
He'll probably be making one next.
It will be handy to make veneer for the columns he turns.
http://www.plamann.com/sys-tmpl/lathe/view_all.nhtml
Joe
Dwight
Call me
205-3141
Tom Plamann
"Dwight" <[email protected]> wrote in message
news:[email protected]...
> Anyone in the Appleton, Wi area that can cut a heigth of 8" on a band
> saw please contact me. I have an 8' piece of wood that I need to make
> 1/8" veneers.
>
> Thanks
>
"Dwight" <[email protected]> wrote in message
news:[email protected]...
> Anyone in the Appleton, Wi area that can cut a heigth of 8" on a band
> saw please contact me. I have an 8' piece of wood that I need to make
> 1/8" veneers.
Wow... that's going to take a huge bandsaw... 8' throat!? Oh wait, maybe
that's the length? ;~)
John