Hi All,
I keep hearing about using a "paring chisel" on a TV show, that
seems to be sharper than a scapel, able to shave end grain by the
foot, etc. Never used with a mallet, just hand pressure. Is this
just a chisel with a 25 degree bevel???
I have two sets, one from Lee Valley that I have at 25 degrees. I
have another set that I'm thinking of grinding at 30-35 degrees for
removing mortices and other heavier work. Then keeping the Lee Valley
ones for "paring work"? Is this the way to go??? Or do I need to go
looking for a specific "paring chisel"???
Any help will be appreciated.....
> I keep hearing about using a "paring chisel" on a TV show, that
>seems to be sharper than a scapel, able to shave end grain by the
>foot, etc. Never used with a mallet, just hand pressure. Is this
>just a chisel with a 25 degree bevel???
>
> I have two sets, one from Lee Valley that I have at 25 degrees. I
>have another set that I'm thinking of grinding at 30-35 degrees for
>removing mortices and other heavier work. Then keeping the Lee Valley
>ones for "paring work"? Is this the way to go??? Or do I need to go
>looking for a specific "paring chisel"???
>
> Any help will be appreciated.....
Also, paring chisels are often longer in overall length to make the
"pairing" more efficient.
-Zz
On Mon, 28 Dec 2009 14:40:03 +1100, the infamous Noons
<[email protected]> scrawled the following:
>Larry Jaques wrote,on my timestamp of 28/12/2009 12:07 PM:
>
>>> Thanks for the clarification! I have only used a 25 degree bevel, and
>>> those get used for mortices, dovetails, and whatever else I feel
>>> like. Wooden mallet applied as needed.
>
>Go easy on the mallet at 25 degrees, rich. Too low for any serious whacking.
Yeah, tap, don't whack those.
>> I picked up one of the Shop Fox urethane mallets and absolutely adore
>> it. (Hey, guys, I finally found a urinestain product I liked!)
>
>They're good but the leather ones are still my "first-reach".
Kinky! Leather mallet? Oh, you meant "rawhide", dincha?
>>> I think I will sharpen the secondary set at 35 degrees plus today,
>>> or whatever the guide will allow. I suspect I have been "mis-using"
>>> my chisels since I started woodworking. Like using a diamond scribe
>>> for a center punch in metal working.
>>
>> <CRINGE!> Don't ever say that over on RCM! (rec.crafts.metalworking)
>
>Ouch! That hurt! Almost like screeching chalk on the black board...
>Dang, both of you just reminded me to go back in the workshop and finish
>separating the metal working section completely from the woodworking one.
>Almost there but still a few things to sort out.
Ayup. One doesn't want grinder sparks in the sawdust, EVER!
>On the mis-use: there is no such thing, rich. If it worked for you, then
>probably you were OK. But it's an excellent idea to have some at 25, some at
>35. I've ruined too many superb japanese 25s to risk it anymore. Now they're
>strictly for hand paring. A cheaper set at 35 does most of the grunt work.
Shame on you, Noons! I never got the Japanese bug, preferring that I
can use a U.S. chisel down to the nub, while a Jap cutter is only 1/4"
long or so before you're into soft iron. I inherited one (12mm #3
gouge) and keep it safe.
>>> Santa is bringing a lathe from Grizzley, so I'll have to learn
>>> about that next.
>>
>> That's a whole 'nother set of books and tool descriptions there, rich.
>
>Oh man! I still haven't opened my lathe from the box I got it from...
>Went to a wood turning intro class a while ago and it completely threw me inside
>out. There is some awful nice stuff to do with a lathe. Although mine was
>initially destined to make wooden lens opening tools!
>(Yeah, I know: sad...)
I never did get the turning bug. I guess I can thank my astigmatism
for that. I spent $10 on a lathe and $10 on a pair of 1/3hp motors
once at a San Diego Fine Woodworker's swapmeet. I oil the lathe
bushings before use, but it still makes noise.
At least I can make bow-saur <snort> and file handles with it. <g>
--
"I believe that sex is one of the most beautiful, natural, wholesome things
that money can buy." --Tom Clancy
>
> Mortising chisels are beefy bastids. Paring chises are much lighter in
> weight and shape. =A0Firmer chisels are firmer. <snicker> =A0
Thanks for the clarification! I have only used a 25 degree bevel, and
those get used for mortices, dovetails, and whatever else I feel
like. Wooden mallet applied as needed.
I think I will sharpen the secondary set at 35 degrees plus today,
or whatever the guide will allow. I suspect I have been "mis-using"
my chisels since I started woodworking. Like using a diamond scribe
for a center punch in metal working.
Also time to review the books on basic woodworking I thought I
didn't need any longer.
Santa is bringing a lathe from Grizzley, so I'll have to learn
about that next.
On Sun, 27 Dec 2009 12:59:58 -0800, the infamous Zz Yzx
<[email protected]> scrawled the following:
>> I keep hearing about using a "paring chisel" on a TV show, that
>>seems to be sharper than a scapel, able to shave end grain by the
>>foot, etc. Never used with a mallet, just hand pressure. Is this
>>just a chisel with a 25 degree bevel???
>>
>> I have two sets, one from Lee Valley that I have at 25 degrees. I
>>have another set that I'm thinking of grinding at 30-35 degrees for
>>removing mortices and other heavier work. Then keeping the Lee Valley
>>ones for "paring work"? Is this the way to go??? Or do I need to go
>>looking for a specific "paring chisel"???
>>
>> Any help will be appreciated.....
>
>Also, paring chisels are often longer in overall length to make the
>"pairing" more efficient.
Can you say "James Swan slick"? I knew you could. <drool> I wasn't
able to wrestle one away from a retired old salt, but I did manage to
get a Satanley #10 in decent shape from him. Thanks, Dave (Fleming,
an old Wrecker from a decade back.)
--
"I believe that sex is one of the most beautiful, natural, wholesome things
that money can buy." --Tom Clancy
On Dec 27, 8:40=A0pm, Noons <[email protected]> wrote:
> Larry Jaques wrote,on my timestamp of 28/12/2009 12:07 PM:
>
> >> Thanks for the clarification! =A0I have only used a 25 degree bevel, a=
nd
> >> those get used for mortices, dovetails, and whatever else I feel
> >> like. =A0Wooden mallet applied as needed.
>
> Go easy on the mallet at 25 degrees, rich. =A0Too low for any serious wha=
cking.
>
> > I picked up one of the Shop Fox urethane mallets and absolutely adore
> > it. =A0(Hey, guys, I finally found a urinestain product I liked!)
>
> They're good but the leather ones are still my "first-reach".
>
> >> =A0 I think I will sharpen the secondary set at 35 degrees plus today,
> >> or whatever the guide will allow. =A0I suspect I have been "mis-using"
> >> my chisels since I started woodworking. =A0Like using a diamond scribe
> >> for a center punch in metal working.
>
> > <CRINGE!> =A0Don't ever say that over on RCM! (rec.crafts.metalworking)
>
> Ouch! =A0That hurt! =A0Almost like screeching =A0chalk on the black board=
...
> Dang, both of you just reminded me to go back in the workshop and finish
> separating the metal working section completely from the woodworking one.
> Almost there but still a few things to sort out.
>
> On the mis-use: there is no such thing, rich. =A0If it worked for you, th=
en
> probably you were OK. =A0But it's an excellent idea to have some at 25, s=
ome at
> 35. =A0I've ruined too many superb japanese 25s to risk it anymore. =A0No=
w they're
> strictly for hand paring. =A0A cheaper set at 35 does most of the grunt w=
ork.
>
> >> =A0 Santa is bringing a lathe from Grizzley, so I'll have to learn
> >> about that next.
>
> > That's a whole 'nother set of books and tool descriptions there, rich.
>
> Oh man! =A0I still haven't opened my lathe from the box I got it from...
> Went to a wood turning intro class a while ago and it completely threw me=
inside
> out. =A0There is some awful nice stuff to do with a lathe. Although mine =
was
> initially destined to make wooden lens opening tools!
> (Yeah, I know: sad...)
About the diamond center punch... In school I worked at a research
lab, and one of the scientists ( really smart dude! ) actually used
the diamond scribe as a center punch. The guy in charge of the
machine shop REALLY had a cow. The scientist went back to designing
death rays that we had to try and build.
rich wrote,on my timestamp of 27/12/2009 9:10 PM:
> I have two sets, one from Lee Valley that I have at 25 degrees. I
> have another set that I'm thinking of grinding at 30-35 degrees for
> removing mortices and other heavier work. Then keeping the Lee Valley
> ones for "paring work"? Is this the way to go??? Or do I need to go
> looking for a specific "paring chisel"???
>
> Any help will be appreciated.....
Paring chisels usually have a low angle - 25 degrees qualifies - and beveled
sides in an almost flat triangular section. They are traditionally used with
hand force only.
Firmer chisels are similar in size and proportions but have square sides with a
rectangular cross section. You can use them with a low bevel angle like paring
chisels or with a 35 degree angle for general trim work, hand powered or with
the aid of a rawhide or wooden hammer/mallet.
Mortise chisels are traditionally of square section and built very strong to
handle not only the whacking needed to sink the mortise but also to lever out
the chipped bits without losing the edge. As such, they usually have a higher
sharpening angle - 40 degrees or higher - and a very strong build and reinforced
handle to sustain heavy hits with mallets.
Having said all that, there are no absolutes: with very small mortises or
dovetails, it is perfectly possible to use small firmer chisels with small
mallets, or even in some cases paring chisels, sharpened at a higher angle. In
fact with dovetails it is almost mandatory to use a paring chisel! By the same
token you can use a firmer as a paring after sharpening the bevel at the
required angle.
So, pick your choice and what you're comfortable with. Just keep in mind the
bevel angle: 25 degrees for paring, 35 for firmer, >40 for mortising. Then
again: if you miss by a few degrees, your heritage won't be spoiled!
Remember - no absolutes!
Larry Jaques wrote,on my timestamp of 28/12/2009 12:07 PM:
>> Thanks for the clarification! I have only used a 25 degree bevel, and
>> those get used for mortices, dovetails, and whatever else I feel
>> like. Wooden mallet applied as needed.
Go easy on the mallet at 25 degrees, rich. Too low for any serious whacking.
> I picked up one of the Shop Fox urethane mallets and absolutely adore
> it. (Hey, guys, I finally found a urinestain product I liked!)
They're good but the leather ones are still my "first-reach".
>> I think I will sharpen the secondary set at 35 degrees plus today,
>> or whatever the guide will allow. I suspect I have been "mis-using"
>> my chisels since I started woodworking. Like using a diamond scribe
>> for a center punch in metal working.
>
> <CRINGE!> Don't ever say that over on RCM! (rec.crafts.metalworking)
Ouch! That hurt! Almost like screeching chalk on the black board...
Dang, both of you just reminded me to go back in the workshop and finish
separating the metal working section completely from the woodworking one.
Almost there but still a few things to sort out.
On the mis-use: there is no such thing, rich. If it worked for you, then
probably you were OK. But it's an excellent idea to have some at 25, some at
35. I've ruined too many superb japanese 25s to risk it anymore. Now they're
strictly for hand paring. A cheaper set at 35 does most of the grunt work.
>> Santa is bringing a lathe from Grizzley, so I'll have to learn
>> about that next.
>
> That's a whole 'nother set of books and tool descriptions there, rich.
Oh man! I still haven't opened my lathe from the box I got it from...
Went to a wood turning intro class a while ago and it completely threw me inside
out. There is some awful nice stuff to do with a lathe. Although mine was
initially destined to make wooden lens opening tools!
(Yeah, I know: sad...)
On Sun, 27 Dec 2009 02:10:07 -0800 (PST), the infamous rich
<[email protected]> scrawled the following:
>Hi All,
>
> I keep hearing about using a "paring chisel" on a TV show, that
>seems to be sharper than a scapel, able to shave end grain by the
>foot, etc. Never used with a mallet, just hand pressure. Is this
>just a chisel with a 25 degree bevel???
Marples Blue Chips are paring chisels. (Thin, lightweight) They can be
used with a chisel or by hand force in a shearing action. NEVER pry
with a chisel (other than a mortiser.) Paring chisel tips will break
right off, and that's super bad karma.
"Learn to Scary Sharpen(tm) hand tools and you'll never go
hungry."(tmLJ)
> I have two sets, one from Lee Valley that I have at 25 degrees. I
>have another set that I'm thinking of grinding at 30-35 degrees for
>removing mortices and other heavier work. Then keeping the Lee Valley
>ones for "paring work"? Is this the way to go??? Or do I need to go
>looking for a specific "paring chisel"???
>
> Any help will be appreciated.....
Mortising chisels are beefy bastids. Paring chises are much lighter in
weight and shape. Firmer chisels are firmer. <snicker> Try your
local library (or Amazon/eBay) for hand tool books by authors such as
Aldren Watson, Toshio Odate, and Alex Bealer for hand tool selection.
http://fwd4.me/9Y0 , http://fwd4.me/9Y2 , http://fwd4.me/9Y3
I bought Odate's book for myself for Christmas and haven't yet read
it. I'll sit down with his Shoji book sometime soon, too. My "To Be
Read" book stack is down to fewer than 100 right now! (I caught up and
read a lot while resting with the broken finger this year.)
--
"I believe that sex is one of the most beautiful, natural, wholesome things
that money can buy." --Tom Clancy
On Sun, 27 Dec 2009 08:29:02 -0800 (PST), the infamous rich
<[email protected]> scrawled the following:
>>
>> Mortising chisels are beefy bastids. Paring chises are much lighter in
>> weight and shape. Firmer chisels are firmer. <snicker>
BTW, Noons put up a nice post about chisels. Save that!
>Thanks for the clarification! I have only used a 25 degree bevel, and
>those get used for mortices, dovetails, and whatever else I feel
>like. Wooden mallet applied as needed.
I picked up one of the Shop Fox urethane mallets and absolutely adore
it. (Hey, guys, I finally found a urinestain product I liked!)
> I think I will sharpen the secondary set at 35 degrees plus today,
>or whatever the guide will allow. I suspect I have been "mis-using"
>my chisels since I started woodworking. Like using a diamond scribe
>for a center punch in metal working.
<CRINGE!> Don't ever say that over on RCM! (rec.crafts.metalworking)
> Also time to review the books on basic woodworking I thought I
>didn't need any longer.
We all need remedial reading trips on occasion. Keep those books!
> Santa is bringing a lathe from Grizzley, so I'll have to learn
>about that next.
That's a whole 'nother set of books and tool descriptions there, rich.
--
"I believe that sex is one of the most beautiful, natural, wholesome things
that money can buy." --Tom Clancy