Anyone out there have a Delta 11-090 Drill Press?

I have a Delta 11-100 in good to excellent working order. Do you
think most parts are the same as a Delta 11-090? I can readily email
pics for visual comparison.
Sonny

> Well you tried to help me earlier Joe, it finally dawned on me that the
> radial DP I am replacing is a Rockwell that eventually was manufactured
> with the Delta badge. IF 11-280 can help in any way, let me know.

I don't need the 11-280 right now... But I'm also keeping a log of all DP
machiens that I run across so if you (or anyone else for that matter) wants
to measure up your machine and provide specs, it'll be bonus material for
me. :)

Certainly not necessary though and only offered for the chronically bored.
:):)

Regards,
Joe Agro, Jr.
(800) 871-5022
01.908.542.0244
Automatic / Pneumatic Drills: http://www.AutoDrill.com
Multiple Spindle Drills: http://www.Multi-Drill.com
Flagship Site: http://www.Drill-N-Tap.com

V8013-R

"Joe AutoDrill" <[email protected]> wrote in message
news:D%FHl.69840$0%[email protected]...
>> I still have the 11-280 right now, if you tell me what you are looking
>> for I will do my best to provide you with the information.
>
> No pressure at all. If it can't be done, no worries at all either.
>
> ...But you've got mail.




NOW you've got mail.

> I still have the 11-280 right now, if you tell me what you are looking for
> I will do my best to provide you with the information.

No pressure at all. If it can't be done, no worries at all either.

...But you've got mail.
--


Regards,
Joe Agro, Jr.
(800) 871-5022
01.908.542.0244
Automatic / Pneumatic Drills: http://www.AutoDrill.com
Multiple Spindle Drills: http://www.Multi-Drill.com
Flagship Site: http://www.Drill-N-Tap.com

V8013-R

"Joe AutoDrill" <[email protected]> wrote in message
news:%rjHl.64835$0%[email protected]...
> I'm looking to confirm a physical measurement from the machine that I
> can't get from the manual, parts drawings, etc...
>
> Must have micrometer handy or be skilled in using a caliper when measuring
> a tubular / round part section.
>
> Any help would be greatly appreciated and potentially rewarded with a
> returned favor, etc.
>
> Thank you.



Well you tried to help me earlier Joe, it finally dawned on me that the
radial DP I am replacing is a Rockwell that eventually was manufactured with
the Delta badge. IF 11-280 can help in any way, let me know.

Sonny,

Much appreciated. Probably different, but if you want to trade photos, I've
also got some ehre of the 11-090 and some basic but unconfirmed measurements
we can compare...

autodrill ATSIGN yunx DOT com is my direct e-mail.

Regards,
Joe Agro, Jr.
(800) 871-5022
01.908.542.0244
Automatic / Pneumatic Drills: http://www.AutoDrill.com
Multiple Spindle Drills: http://www.Multi-Drill.com
Flagship Site: http://www.Drill-N-Tap.com

V8013-R


"Sonny" <[email protected]> wrote in message
news:08266251-45da-48f1-a542-b7fa47c3c09f@s20g2000yqh.googlegroups.com...
>I have a Delta 11-100 in good to excellent working order. Do you
> think most parts are the same as a Delta 11-090? I can readily email
> pics for visual comparison.
> Sonny

I thought I had the manual, but not sure, now. I'll check OWWM,
though.
Sonny

In article <%rjHl.64835$0%[email protected]>,
"Joe AutoDrill" <[email protected]> wrote:

> I'm looking to confirm a physical measurement from the machine that I can't
> get from the manual, parts drawings, etc...
>
> Must have micrometer handy or be skilled in using a caliper when measuring a
> tubular / round part section.
>
> Any help would be greatly appreciated and potentially rewarded with a
> returned favor, etc.
>
> Thank you.
>
> Regards,
> Joe Agro, Jr.
> (800) 871-5022
> 01.908.542.0244
> Automatic / Pneumatic Drills: http://www.AutoDrill.com
> Multiple Spindle Drills: http://www.Multi-Drill.com
> Flagship Site: http://www.Drill-N-Tap.com
>
> V8013-R

Sold mine last year.....

--
--------------------------------------------------------
Personal e-mail is the n7bsn but at amsat.org
This posting address is a spam-trap and seldom read
RV and Camping FAQ can be found at
http://www.ralphandellen.us/rv

Should have mentioned it was a smaller radial arm drill press... Sorry for
the lack of info!

Regards,
Joe Agro, Jr.
(800) 871-5022
01.908.542.0244
Automatic / Pneumatic Drills: http://www.AutoDrill.com
Multiple Spindle Drills: http://www.Multi-Drill.com
Flagship Site: http://www.Drill-N-Tap.com

V8013-R

"Joe AutoDrill" <[email protected]> wrote in message
news:[email protected]...
>> Well you tried to help me earlier Joe, it finally dawned on me that the
>> radial DP I am replacing is a Rockwell that eventually was manufactured
>> with the Delta badge. IF 11-280 can help in any way, let me know.
>
> I don't need the 11-280 right now... But I'm also keeping a log of all DP
> machiens that I run across so if you (or anyone else for that matter)
> wants to measure up your machine and provide specs, it'll be bonus
> material for me. :)
>
> Certainly not necessary though and only offered for the chronically bored.
> :):)


I still have the 11-280 right now, if you tell me what you are looking for I
will do my best to provide you with the information.

>> No pressure at all. If it can't be done, no worries at all either.
>>
>> ...But you've got mail.
>
> NOW you've got mail.

So it was *you* who sent me all those bills today?!? <grin>

Seriously though, thank you for the info. It's going right into my
database. I'll send you a PDF of the drawing we create from that info FYI
in a few days.
--


Regards,
Joe Agro, Jr.
(800) 871-5022
01.908.542.0244
Automatic / Pneumatic Drills: http://www.AutoDrill.com
Multiple Spindle Drills: http://www.Multi-Drill.com
Flagship Site: http://www.Drill-N-Tap.com

V8013-R