On Apr 23, 11:14=A0pm, Garry <[email protected]> wrote:
> I have a Kity 1619 saw and I have discovered that the saw blade is not
> correctly aligned with the slot on the table. I cannot see any obvious
> adjustment for the balde.
> Does anyone have any ideas?
>
> Thanks
I went to the Kity website and it ~looks~ like there are 4 bolts in
the top of the tabletop to adjust the trunnion. I've been wrong before
though. Looky here:
http://www.dbkeighley.co.uk/masters/kitty1619.htm
I don't see where there are manuals available. Maybe they would scan a
copy and send it to you though.
On 24 Apr 2010 03:14:58 GMT, the infamous Garry
<[email protected]> scrawled the following:
>I have a Kity 1619 saw and I have discovered that the saw blade is not
>correctly aligned with the slot on the table. I cannot see any obvious
>adjustment for the balde.
>Does anyone have any ideas?
Adjust the trunnion position if they connect directly to the table.
If not, adjust the table position in relation to the base, where the
trunnions are mounted.
--
...in order that a man may be happy, it is necessary that he should
not only be capable of his work, but a good judge of his work.
-- John Ruskin
RP <[email protected]> wrote in news:0c6b7617-3972-4462-84cb-2f21e814baf9
@r11g2000vbc.googlegroups.com:
> I went to the Kity website and it ~looks~ like there are 4 bolts in
> the top of the tabletop to adjust the trunnion. I've been wrong before
> though. Looky here:
>
>
> http://www.dbkeighley.co.uk/masters/kitty1619.htm
>
>
> I don't see where there are manuals available. Maybe they would scan a
> copy and send it to you though.
>
By trial and error I discovered that all 10 bolts on the top need to be
released to allow the top to "float" on the saw bench. Destroyed all bolts
in the process! But now the slots are aligned to the blade, probably for
the first time.
On May 18, 9:03=A0am, Garry <[email protected]> wrote:
> RP <[email protected]> wrote in news:0c6b7617-3972-4462-84cb-2f21e814baf=
9
> @r11g2000vbc.googlegroups.com:
>
> > I went to the Kity website and it ~looks~ like there are 4 bolts in
> > the top of the tabletop to adjust the trunnion. I've been wrong before
> > though. Looky here:
>
> >http://www.dbkeighley.co.uk/masters/kitty1619.htm
>
> > I don't see where there are manuals available. Maybe they would scan a
> > copy and send it to you though.
>
> By trial and error I discovered that all 10 bolts on the top need to be
> released to allow the top to "float" on the saw bench. Destroyed all bolt=
s
> in the process! But now the slots are aligned to the blade, probably for
> the first time.
Bolts are cheap. Buy new and and make some sawdust.
RP