Milwaukee half in. drill, which one to buy.

This is a multi-part message in MIME format.
--------------070808080801030501070203
Content-Type: text/plain; charset=ISO-8859-1; format=flowed
Content-Transfer-Encoding: 7bit

Oh, I like those prices, and for the number of times I'm going to use
this drill, that might be the way to go.
Thanks for the tip. I'm still leaning towards the 8 amp model, gotta
have more power!!!
Thanks for the tip.


Thomas Kendrick wrote:
> On Sat, 14 May 2005 19:47:18 GMT, "Jim L." <[email protected]> wrote:
>
>
>>If you think you will also need to drill holes in concrete around the house
>>you might consider a Hilti hammer drill. Jim.
>>
>
> I have the 0234-6, which is the older model. It works just fine and I
> have never been able to stall it. These drills are sold
> factory-reconditioned, so if you will have limited need for a
> heavy-duty drill like these, check the web to find one at reduced
> cost. http://www.powertoolservices.com/drills.htm
> Unless you use it as part of your daily work, either one will likely
> outlive you.
>
>
>>"Nirodac" <[email protected]> wrote in message
>>news:y_phe.42411$0X6.309@edtnps90...
>>
>>>I've narrowed my search for my next project tool, down to two models.
>>>Milwaukee models 0234-6 and 0299-20 1/2 inch drills.

--------------070808080801030501070203
Content-Type: text/x-vcard; charset=utf-8;
name="nirodac.vcf"
Content-Transfer-Encoding: 7bit
Content-Disposition: attachment;
filename="nirodac.vcf"

begin:vcard
note;quoted-printable:There are 10 types of people in the world, those that understand binary,=
and those that don't!=0D=0A=

version:2.1
end:vcard


--------------070808080801030501070203--

If one runs at a higher speed and you will be using it more for wood working
I recommend that one. The faster speeds tend to cut cleaner holes with less
tear out.


"Nirodac" <[email protected]> wrote in message
news:y_phe.42411$0X6.309@edtnps90...
> I've narrowed my search for my next project tool, down to two models.
> Milwaukee models 0234-6 and 0299-20 1/2 inch drills. Not sure why
> they would offer too similar models, unless maybe one is being phased out.
> They are the same price at my local supplier. Physical size isn't an
> issue, RPM is the same, variable reversing is the same.
> Other than the current rating (8 amps (more torque?) and 5 amps and the
> detachable cord) which is the better choice.
> I don't need or care for a detachable cord or quick change brushes. The
> only tool I've ever worn out the brushes on was my Dremel tool.I need
> the drill for this project, and I don't ever want to have to buy another
> 1/2 inch drill again.
> One is marked (the one I favour) Made in USA, the other is marked "Made
> by Milwaukee tools, Brookfield WI". To me, this is usually a sign that
> it's made elsewhere. I'd rather buy American, than off shore.
> I think I read somewhere that Milwaukee has been sold, or is that Porter
> Cable, to an offshore company.
> I really just want a really good tool, before they are all gone. It's
> not for commercial use, only around my house (and probably the kids
> houses too).
>
> I'll be using it to drill holes in landscape and railway tires (less
> than 60 ties) for nails and rebar (to keep the retaining wall in place).
>
> Thanks for your comments.
>
>
>

Nirodac <[email protected]> wrote in
news:Ebzhe.42916$0X6.41907@edtnps90:

> Oh, I like those prices, and for the number of times I'm going to use
> this drill, that might be the way to go.
> Thanks for the tip. I'm still leaning towards the 8 amp model, gotta
> have more power!!!
> Thanks for the tip.

What the man said about hanging on to this tool bears repeating. These
have a bunch of torque, and can injure the unwary.

Remember that Tim Taylor was on a first name basis with the ER techs.

Patriarch

If you think you will also need to drill holes in concrete around the house
you might consider a Hilti hammer drill. Jim.


"Nirodac" <[email protected]> wrote in message
news:y_phe.42411$0X6.309@edtnps90...
> I've narrowed my search for my next project tool, down to two models.
> Milwaukee models 0234-6 and 0299-20 1/2 inch drills. Not sure why
> they would offer too similar models, unless maybe one is being phased out.
> They are the same price at my local supplier. Physical size isn't an
> issue, RPM is the same, variable reversing is the same.
> Other than the current rating (8 amps (more torque?) and 5 amps and the
> detachable cord) which is the better choice.
> I don't need or care for a detachable cord or quick change brushes. The
> only tool I've ever worn out the brushes on was my Dremel tool.I need
> the drill for this project, and I don't ever want to have to buy another
> 1/2 inch drill again.
> One is marked (the one I favour) Made in USA, the other is marked "Made
> by Milwaukee tools, Brookfield WI". To me, this is usually a sign that
> it's made elsewhere. I'd rather buy American, than off shore.
> I think I read somewhere that Milwaukee has been sold, or is that Porter
> Cable, to an offshore company.
> I really just want a really good tool, before they are all gone. It's
> not for commercial use, only around my house (and probably the kids
> houses too).
>
> I'll be using it to drill holes in landscape and railway tires (less
> than 60 ties) for nails and rebar (to keep the retaining wall in place).
>
> Thanks for your comments.
>
>
>

"Nirodac" <[email protected]> wrote in message
news:y_phe.42411$0X6.309@edtnps90...
> I've narrowed my search for my next project tool, down to two models.
> Milwaukee models 0234-6 and 0299-20 1/2 inch drills. Not sure why
> they would offer too similar models, unless maybe one is being phased out.
> They are the same price at my local supplier. Physical size isn't an
> issue, RPM is the same, variable reversing is the same.
> Other than the current rating (8 amps (more torque?) and 5 amps and the
> detachable cord) which is the better choice.


I'd go with the 299-20. More power, extra length to accommodate the bigger
motor, no detachable cord. If they're the same price @ the dealer, then
you're really paying a premium for that detachable cord on the smaller
drill. I have the 3107-6 version that I bought reconditioned, the only thing
that impressed me more was the big "Hole Hawg" my SIL used(commercial
plumber) for punching BIG holes through walls. Had a 2' pipe handle on side,
but you better NOT have it locked on, because if the bit binds and catches,
you will NOT hang onto it!

--
Nahmie
The greatest headaches are those we cause ourselves.

On Sat, 14 May 2005 19:47:18 GMT, "Jim L." <[email protected]> wrote:

>If you think you will also need to drill holes in concrete around the house
>you might consider a Hilti hammer drill. Jim.
>
I have the 0234-6, which is the older model. It works just fine and I
have never been able to stall it. These drills are sold
factory-reconditioned, so if you will have limited need for a
heavy-duty drill like these, check the web to find one at reduced
cost. http://www.powertoolservices.com/drills.htm
Unless you use it as part of your daily work, either one will likely
outlive you.

>"Nirodac" <[email protected]> wrote in message
>news:y_phe.42411$0X6.309@edtnps90...
>> I've narrowed my search for my next project tool, down to two models.
>> Milwaukee models 0234-6 and 0299-20 1/2 inch drills.

I have the 300/1200 rpm Hole Hawg 1/2" drill as well. I respect it
very much every time I turn it on, watching for how it might whack me
if it stalls on the 300 rpm setting. It DOES cut a 2" hole in record
time with a self-feeding bit.

On Sat, 14 May 2005 22:49:13 -0500, Patriarch
<[email protected]> wrote:
>Nirodac <[email protected]> wrote in
>news:Ebzhe.42916$0X6.41907@edtnps90:
>> Oh, I like those prices, and for the number of times I'm going to use
>> this drill, that might be the way to go.
>What the man said about hanging on to this tool bears repeating. These
>have a bunch of torque, and can injure the unwary.
>Remember that Tim Taylor was on a first name basis with the ER techs.
>Patriarch