A lady friend brought over a chair for me to look at. The chair was dusty,
had a missing back spindle, the seat was broken in three pieces and the
tenon was broken off one of the side rungs. I rebuilt the tenon, glued the
seat back together(as best I could under the circumstances) with added
dutchmen on the bottom and, using that shaving horse I showed here 2 weeks
ago, made a new spindle. I thought I would post a few pix before I put a
finish on the spindle.
http://home.mchsi.com/~lhote5/Trainwreckchair/chair1big.jpg
The back appears distorted but that is due to a poor photo take. Notice the
upscale photo drop????
And a closer up.
http://home.mchsi.com/~lhote5/Trainwreckchair/chair2big.jpg
The circular carving on the new spindle looks a little high but that's
easily adjusted....the back isn't glued up yet.
I'll post some pix of the tenon fix and the seat reconstruction within a
week as soon as I get the finish on the spindle. The woman does not want to
strip off the old finish but wishes to leave it more-or-less as it is...with
all the dents, scratches and 'interesting' features of an old, used chair.
Ordinarily, I don't do work for other people but this will be the one
exception.
Larry
--
Columbia, MO
www.llhote.com
I hope she is a good baker, or something!
Wilson
"Lawrence L'Hote" <[email protected]> wrote in message
news:Sxxhe.81716$WI3.2339@attbi_s71...
>
> <[email protected]> wrote in message
> news:[email protected]...
>> Looks like you have a good start on it, Larry. I'll be interested to
>> see your progress, especially how you go about matching the old finish.
>> Are you going to "distress" the new spindle?
>>
>
> The 3 remaining spindles show little 'distress' just some differences in
> shading. At the moment the back is ready to be glued up.
> Finishing/staining the new spindle to match the old caused me a little
> concern but I used several other dowels of the same wood to get a match of
> the original finish. You can imagine there are umteen dozen shades from
> very dark brown to light brownish red on that chair and wear places that
> add character. I used a mixture of water soluble dyes...a brown and an
> antique cherry. Then sealed with shellac followed with a glaze of
> antique cherry gel and burnt umber pigment and then rubbed a bit. Goooood
> match. I may dab a little of that glaze on the old spindles to bring them
> a little closer to the new one. I'll cook up a batch of hot hide glue
> tomorrow and glue up the back.. Early this coming week, I'm planning to
> get some better quality pix of the finished chair and details of the other
> two things the chair needed.
>
> Larry
>
"Tim Douglass" <[email protected]> wrote in message
news:[email protected]...
> On Sun, 15 May 2005 16:44:24 GMT, "Lawrence L'Hote" <[email protected]>
> wrote:
>
> A fine job of work there. Repairing chairs seems to be necessary
> frequently around my world, but I've not done such careful jobs of
> most of them. I really like the way you fixed the broken tenon, I'm
> going to file that idea away for the next time I need to fix one.
In the beginning of the restore that problem with the broken tenon caused me
the most concern, however as it turned out it was easily fixed. I thought
about drilling the rung for a dowel but decided the drilling process just
might damage the rung even more. To cut the slot in the rung you must
secure the rung to a flat piece of scrap so that it doesn't rotate when cut.
I cut a 90 deg groove in the scrap much like what you would do to drill a
piece of round stock. Then I carved out an indention so that the larger
diameter part of the rung could set into the scrap. A small hose clamp was
then used to secure the rung to the scrap piece. I could post a picture of
the scrap piece if you need it.
Larry
On Sun, 15 May 2005 16:44:24 GMT, "Lawrence L'Hote" <[email protected]>
wrote:
>
>"Wilson Lamb" <[email protected]> wrote in message
>news:[email protected]...
>>I hope she is a good baker, or something!
>> Wilson
>
>Could be...or something. ;-) I've contacted the lady to pick up her
>chair. Following is a little bloviation about the process of fixing it. It
>will be tough letting it go.
>
>http://home.mchsi.com/~lhote5/Trainwreckchair/Trainwreckchair.htm
A fine job of work there. Repairing chairs seems to be necessary
frequently around my world, but I've not done such careful jobs of
most of them. I really like the way you fixed the broken tenon, I'm
going to file that idea away for the next time I need to fix one.
--
"We need to make a sacrifice to the gods, find me a young virgin... oh, and bring something to kill"
Tim Douglass
http://www.DouglassClan.com
"Wilson Lamb" <[email protected]> wrote in message
news:[email protected]...
>I hope she is a good baker, or something!
> Wilson
Could be...or something. ;-) I've contacted the lady to pick up her
chair. Following is a little bloviation about the process of fixing it. It
will be tough letting it go.
http://home.mchsi.com/~lhote5/Trainwreckchair/Trainwreckchair.htm
Larry
--
Columbia, MO
www.llhote.com
"Lowell Holmes" <[email protected]> wrote in message
news:Z_0ie.2817$sr1.2567@trnddc04...
>
> I tried to open the jpg's, but couldn't get there. Is there a problem with
> the links shown?
> :-)
Someone else over on a.b.p.w brought this to my attention. Apparently, my
ISP, Mediacom, is having some problems. I can't get any of my sites, the
Mediacom Online website or my e-mail...curious, however, I CAN get
newsgroups. Mediacom seems to have a 'problem' once or twice a year.. I
only put up with Mediacom because I get 60 meg webspace with my
digital/internet connection.
Larry
--
Columbia, MO
www.llhote.com <<----- it don't work right now(8:30 Central Daylite
Time)....maybe later...
<[email protected]> wrote in message
news:[email protected]...
> Looks like you have a good start on it, Larry. I'll be interested to
> see your progress, especially how you go about matching the old finish.
> Are you going to "distress" the new spindle?
>
The 3 remaining spindles show little 'distress' just some differences in
shading. At the moment the back is ready to be glued up. Finishing/staining
the new spindle to match the old caused me a little concern but I used
several other dowels of the same wood to get a match of the original finish.
You can imagine there are umteen dozen shades from very dark brown to light
brownish red on that chair and wear places that add character. I used a
mixture of water soluble dyes...a brown and an antique cherry. Then sealed
with shellac followed with a glaze of antique cherry gel and burnt umber
pigment and then rubbed a bit. Goooood match. I may dab a little of that
glaze on the old spindles to bring them a little closer to the new one. I'll
cook up a batch of hot hide glue tomorrow and glue up the back.. Early this
coming week, I'm planning to get some better quality pix of the finished
chair and details of the other two things the chair needed.
Larry
"Lawrence L'Hote" <[email protected]> wrote in message
news:Qc1ie.86148$WI3.63436@attbi_s71...
>
> "Lowell Holmes" <[email protected]> wrote in message
> news:Z_0ie.2817$sr1.2567@trnddc04...
>>
>> I tried to open the jpg's, but couldn't get there. Is there a problem
>> with the links shown?
>> :-)
>
> Someone else over on a.b.p.w brought this to my attention. Apparently, my
> ISP, Mediacom, is having some problems. I can't get any of my sites, the
> Mediacom Online website or my e-mail...curious, however, I CAN get
> newsgroups. Mediacom seems to have a 'problem' once or twice a year.. I
> only put up with Mediacom because I get 60 meg webspace with my
> digital/internet connection.
>
> Larry
> --
> Columbia, MO
> www.llhote.com <<----- it don't work right now(8:30 Central Daylite
> Time)....maybe later...
Well,
I'll try again later. Thanks for responding.
"Lawrence L'Hote" <[email protected]> wrote in message
news:Lyshe.77906$r53.75089@attbi_s21...
>A lady friend brought over a chair for me to look at. The chair was dusty,
>had a missing back spindle, the seat was broken in three pieces and the
>tenon was broken off one of the side rungs. I rebuilt the tenon, glued the
>seat back together(as best I could under the circumstances) with added
>dutchmen on the bottom and, using that shaving horse I showed here 2 weeks
>ago, made a new spindle. I thought I would post a few pix before I put a
>finish on the spindle.
> http://home.mchsi.com/~lhote5/Trainwreckchair/chair1big.jpg
>
> The back appears distorted but that is due to a poor photo take. Notice
> the upscale photo drop????
>
> And a closer up.
>
> http://home.mchsi.com/~lhote5/Trainwreckchair/chair2big.jpg
>
> The circular carving on the new spindle looks a little high but that's
> easily adjusted....the back isn't glued up yet.
>
> I'll post some pix of the tenon fix and the seat reconstruction within a
> week as soon as I get the finish on the spindle. The woman does not want
> to strip off the old finish but wishes to leave it more-or-less as it
> is...with all the dents, scratches and 'interesting' features of an old,
> used chair. Ordinarily, I don't do work for other people but this will be
> the one exception.
>
> Larry
>
> --
> Columbia, MO
> www.llhote.com
I tried to open the jpg's, but couldn't get there. Is there a problem with
the links shown?
:-)
--
>
> "Lawrence L'Hote" <[email protected]> wrote in message
> news:Qc1ie.86148$WI3.63436@attbi_s71...
>>
>> "Lowell Holmes" <[email protected]> wrote in message
>> news:Z_0ie.2817$sr1.2567@trnddc04...
>>>
>>> I tried to open the jpg's, but couldn't get there. Is there a problem
>>> with the links shown?
>>> :-)
>>
>> Someone else over on a.b.p.w brought this to my attention. Apparently,
>> my ISP, Mediacom, is having some problems. I can't get any of my sites,
>> the Mediacom Online website or my e-mail...curious, however, I CAN get
>> newsgroups. Mediacom seems to have a 'problem' once or twice a year.. I
>> only put up with Mediacom because I get 60 meg webspace with my
>> digital/internet connection.
>>
>> Larry
>> --
>> Columbia, MO
>> www.llhote.com <<----- it don't work right now(8:30 Central Daylite
>> Time)....maybe later...
> Well,
> I'll try again later. Thanks for responding.
>
I can get through to see it now. It's an impressive job you did!
On Mon, 16 May 2005 05:28:34 GMT, "Lawrence L'Hote" <[email protected]>
wrote:
>
>"Tim Douglass" <[email protected]> wrote in message
>news:[email protected]...
>> On Sun, 15 May 2005 16:44:24 GMT, "Lawrence L'Hote" <[email protected]>
>> wrote:
>>
>> A fine job of work there. Repairing chairs seems to be necessary
>> frequently around my world, but I've not done such careful jobs of
>> most of them. I really like the way you fixed the broken tenon, I'm
>> going to file that idea away for the next time I need to fix one.
>
>In the beginning of the restore that problem with the broken tenon caused me
>the most concern, however as it turned out it was easily fixed. I thought
>about drilling the rung for a dowel but decided the drilling process just
>might damage the rung even more. To cut the slot in the rung you must
>secure the rung to a flat piece of scrap so that it doesn't rotate when cut.
>I cut a 90 deg groove in the scrap much like what you would do to drill a
>piece of round stock. Then I carved out an indention so that the larger
>diameter part of the rung could set into the scrap. A small hose clamp was
>then used to secure the rung to the scrap piece. I could post a picture of
>the scrap piece if you need it.
Sounds like a pretty straightforward jig. I had imagined a box with
various wedges and a clamp or two. I currently have an old piano stool
(with the screw top) that needs a rung repaired, so I may give that
approach a try rather than just turning a new rung - which was my
original thought.
--
"We need to make a sacrifice to the gods, find me a young virgin... oh, and bring something to kill"
Tim Douglass
http://www.DouglassClan.com
"Wilson Lamb" <[email protected]> wrote in message
news:[email protected]...
>I hope she is a good baker, or something!
Well now....she's taking me out to din-din at the diner this Wednesday for
fixing her chair...FWIW
Larry