The model airplane (aeroplane for the Brits) business developed
a heat shrink, sticky backed plastic film for covering wings
etc.. Stuff isn't soluble in alcohol, gas, white gas or a little
nitro. Conforms to smooth curves as well as flats and sticks
"like glue". Heat gun it or iron it on and you're done. Comes in
translucent or opaque.
The translucent version seems like it'd still let the grain
show, albeit as if under 30 coats of shellac. Seems like
this could be a great finish for some kids furniture - it
comes in some pretty bright colors - even Day-Glo. Any
one try this stuff - on furniture?
charlie b
Odinn wrote:
> I'm assuming you're talking about stuff like SuperKote. At $10 for a
> piece that covers approx 2ft by 6ft area (before shrinkage), that's
> pretty expensive covering.
>
Priced dewaxed shellac lately? Ever french polished a
top - with 8 or 10 applications?
How much is your time worth? When you figure the cost of
the finish, the time to prep the surface, time between coats,
the prep for the next coat,the rubbing out when you're done...
And try finding a semi- transparaent high gloss finish - in
bright yellow, or red or blue, to say nothing of Day-Glo/
International Orange - well ...
I'm thinking of a cherry ply top that's going to be framed
anyway - 30 minutes, including iron on time for $10 or
even $20 seems cost effective. Repairing it would be a
PITA but hey - it's quick, fairly durable and high gloss.
A light rub with steel wool and you've got semi-gloss.
Won't pop the grain but no finish does it all and none
as quickly.
Priced dewaxed shellac lately?
> Odinn - almost wanting to get back into model airplanes, but can't afford it
This from a woodworker - with a few bucks wrapped up
in tools and more in wood? Never could understand how some
guys could stand perfectly straight and almost motionless
while doing some amazing airobatics with their planes?
I'd be out there body englishing all over the place to the
point where people would drop coins in my hat and
mumble something about how hard it must be for "someone
like him" to even get the plane off that ground, let alone
fly it once it was up. If I could work some facial contortions
and a little drooling for effect, I could collect enough to
pay for gas and maybe a new prop or two : )
charlie b
Never on furniture. I wouldn't. You will have serious durability problems.
"charlie b" <[email protected]> wrote in message
news:[email protected]...
> The model airplane (aeroplane for the Brits) business developed
> a heat shrink, sticky backed plastic film for covering wings
> etc.. Stuff isn't soluble in alcohol, gas, white gas or a little
> nitro. Conforms to smooth curves as well as flats and sticks
> "like glue". Heat gun it or iron it on and you're done. Comes in
> translucent or opaque.
>
> The translucent version seems like it'd still let the grain
> show, albeit as if under 30 coats of shellac. Seems like
> this could be a great finish for some kids furniture - it
> comes in some pretty bright colors - even Day-Glo. Any
> one try this stuff - on furniture?
>
> charlie b
On 12/11/2005 12:41 PM charlie b mumbled something about the following:
> The model airplane (aeroplane for the Brits) business developed
> a heat shrink, sticky backed plastic film for covering wings
> etc.. Stuff isn't soluble in alcohol, gas, white gas or a little
> nitro. Conforms to smooth curves as well as flats and sticks
> "like glue". Heat gun it or iron it on and you're done. Comes in
> translucent or opaque.
>
> The translucent version seems like it'd still let the grain
> show, albeit as if under 30 coats of shellac. Seems like
> this could be a great finish for some kids furniture - it
> comes in some pretty bright colors - even Day-Glo. Any
> one try this stuff - on furniture?
>
> charlie b
I'm assuming you're talking about stuff like SuperKote. At $10 for a
piece that covers approx 2ft by 6ft area (before shrinkage), that's
pretty expensive covering.
--
Odinn - almost wanting to get back into model airplanes, but can't afford it
On 12/11/2005 7:24 PM charlie b mumbled something about the following:
> Odinn wrote:
>
>> I'm assuming you're talking about stuff like SuperKote. At $10 for a
>> piece that covers approx 2ft by 6ft area (before shrinkage), that's
>> pretty expensive covering.
>>
>
> Priced dewaxed shellac lately? Ever french polished a
> top - with 8 or 10 applications?
Umm, actually, not lately, I can't even get into my shop to find my
table saw, much less build anything worth putting that much work into.
> How much is your time worth? When you figure the cost of
> the finish, the time to prep the surface, time between coats,
> the prep for the next coat,the rubbing out when you're done...
> And try finding a semi- transparaent high gloss finish - in
> bright yellow, or red or blue, to say nothing of Day-Glo/
> International Orange - well ...
Well, if you're thinking of using Day-Glo colors, I can't argue with it
at all.
> I'm thinking of a cherry ply top that's going to be framed
> anyway - 30 minutes, including iron on time for $10 or
> even $20 seems cost effective. Repairing it would be a
> PITA but hey - it's quick, fairly durable and high gloss.
> A light rub with steel wool and you've got semi-gloss.
> Won't pop the grain but no finish does it all and none
> as quickly.
>
> Priced dewaxed shellac lately?
Covering it with SuperKote won't give you anywhere near the look of a
french polished top, and not even close to a brush on poly coat. But if
you want a translucent color, why not :)
>> Odinn - almost wanting to get back into model airplanes, but can't afford it
>
> This from a woodworker - with a few bucks wrapped up
> in tools and more in wood? Never could understand how some
> guys could stand perfectly straight and almost motionless
> while doing some amazing airobatics with their planes?
Ever priced RC model airplanes? Beginner kits start around $300 and go
up from there. I know one guy who has more in ONE RC airplane than I
have in my Harley (and he has his garage full of them).
> I'd be out there body englishing all over the place to the
> point where people would drop coins in my hat and
> mumble something about how hard it must be for "someone
> like him" to even get the plane off that ground, let alone
> fly it once it was up. If I could work some facial contortions
> and a little drooling for effect, I could collect enough to
> pay for gas and maybe a new prop or two : )
You just described my antics (I do the same trying to play video arcade
games).
--
Odinn
RCOS #7 SENS BS ???
"The more I study religions the more I am convinced that man never
worshiped anything but himself." -- Sir Richard Francis Burton
Reeky's unofficial homepage ... http://www.reeky.org
'03 FLHTI ........... http://www.sloanclan.org/gallery/ElectraGlide
'97 VN1500D ......... http://www.sloanclan.org/gallery/VulcanClassic
Atlanta Biker Net ... http://www.atlantabiker.net
Vulcan Riders Assoc . http://www.vulcanriders.org
rot13 [email protected] to reply
"charlie b" <[email protected]> wrote in message
news:[email protected]...
> The model airplane (aeroplane for the Brits) business developed
> a heat shrink, sticky backed plastic film for covering wings
> etc.. Stuff isn't soluble in alcohol, gas, white gas or a little
> nitro. Conforms to smooth curves as well as flats and sticks
> "like glue". Heat gun it or iron it on and you're done. Comes in
> translucent or opaque.
>
> The translucent version seems like it'd still let the grain
> show, albeit as if under 30 coats of shellac. Seems like
> this could be a great finish for some kids furniture - it
> comes in some pretty bright colors - even Day-Glo. Any
> one try this stuff - on furniture?
>
Sounds expensive
It's extremely thin and delicate. I don't think it will hold up
like a normal finish, and as soon as it's scratched or torn, the
entire thing will peel off.
charlie b wrote:
> The model airplane (aeroplane for the Brits) business developed
> a heat shrink, sticky backed plastic film for covering wings
> etc.. Stuff isn't soluble in alcohol, gas, white gas or a little
> nitro. Conforms to smooth curves as well as flats and sticks
> "like glue". Heat gun it or iron it on and you're done. Comes in
> translucent or opaque.