[email protected] wrote:
> FWW, april 2005, methods of work.
>
>
> : ^ )
Congratulations! I think. Besides using melamine instead of phenolic
plastic for the base, how is your jig different than the
"Flush-Trimming Baseplate" detailed on pages 119 - 123 in Bill Hylton's
Router Magic?
Hi Bridger,
Got mine yesterday and soon as I saw your post,
I checked it out. Pretty cool idea. When your name is
in FWW, it's almost like being immortal!
Let me ask you if you ever thought about running
a pattern bit perpindicular to the table top (i.e., along
the edge of the table). I know you would need some
extra support clamped on to prevent wobbling.
Just asking because I remember seeing Norm do it
that way once when he was flushing up the side of
a face-frame to the cabinet.
Lou
In article <[email protected]>,
<[email protected]> wrote:
> FWW, april 2005, methods of work.
>
>
> : ^ )
[email protected] wrote:
>
> FWW, april 2005, methods of work.
>
> : ^ )
No page number? You're not going to make
me read ALL the text are you?
charlie b
Unisaw A100 <[email protected]> wrote in
news:[email protected]:
>>FWW, april 2005, methods of work.
>
>>: ^ )
>
>
> BJ, is this one coming soon to a newsstand/mailbox near me?
>
> UA10, who can put his hands on the February issue but
> doesn't think he's gotten April yet...
>
Mine was in today's mailbox, near Oakland, California.
Good tiplet, Bridger! Well 'splained.
Patriarch
Unisaw A100 <[email protected]> wrote in
news:[email protected]:
> Mark & Juanita wrote:
>> Yep, mine showed up here in Tucson today also. Good on ya' Bridger.
>
>
> whew! Good. I just need to sit and wait.
>
> By the way, and not to take away from Bridger but David
> Sobel (aka J. Pagona) recently had his name associated with
> an article on spokeshaves (?) in the most recent Woodwork
> (the one without a Web page) magazine.
>
> UA100
>
www.woodwork-mag.com
I think Owen Lowe pointed this out last week. Recently appeared.
The spokeshave was beautiful. Got me to thinking about doing one with a
commercially available blade set. I'm not much of a metal bender.
Patriarch
Mark & Juanita wrote:
> Yep, mine showed up here in Tucson today also. Good on ya' Bridger.
whew! Good. I just need to sit and wait.
By the way, and not to take away from Bridger but David
Sobel (aka J. Pagona) recently had his name associated with
an article on spokeshaves (?) in the most recent Woodwork
(the one without a Web page) magazine.
UA100
On Sun, 13 Feb 2005 13:13:54 -0500, loutent <[email protected]> wrote:
>Let me ask you if you ever thought about running
>a pattern bit perpindicular to the table top (i.e., along
>the edge of the table). I know you would need some
>extra support clamped on to prevent wobbling.
>
>Just asking because I remember seeing Norm do it
>that way once when he was flushing up the side of
>a face-frame to the cabinet.
>
>Lou
I did do it that way for quite a while. there were a couple of
problems: the bearing tended to get fouled with glue, leading to an
uneven cut and the wobble issue was always there. I made a bunch of
different things to control it, some of which worked well in some
applications. for small panels it works well to do them on edge on the
router table, but mig panels are too unwieldy to do that way. curved
edges become a real pain to do on edge on the table. the jig in the
FWW tiplet works for all but tiny panels, straight or curved edges, as
big as you want to go.
On Sat, 12 Feb 2005 22:59:16 -0600, Patriarch
<[email protected]> wrote:
>Unisaw A100 <[email protected]> wrote in
>news:[email protected]:
>
>>>FWW, april 2005, methods of work.
>>
>>>: ^ )
>>
>>
>> BJ, is this one coming soon to a newsstand/mailbox near me?
>>
>> UA10, who can put his hands on the February issue but
>> doesn't think he's gotten April yet...
>>
>
>Mine was in today's mailbox, near Oakland, California.
>
>Good tiplet, Bridger! Well 'splained.
>
>Patriarch
Yep, mine showed up here in Tucson today also. Good on ya' Bridger.
+--------------------------------------------------------------------------------+
The absence of accidents does not mean the presence of safety
Army General Richard Cody
+--------------------------------------------------------------------------------+
On Sun, 13 Feb 2005 18:10:54 -0800, the inscrutable charlie b
<[email protected]> spake:
>[email protected] wrote:
>>
>> FWW, april 2005, methods of work.
>>
>> : ^ )
>
> No page number? You're not going to make
> me read ALL the text are you?
You don't hang on every single word in the FWW, charlie?
Sir Bridger was knighted with the top 2/3 of page 14.
----------------------------------
VIRTUE...is its own punishment
http://www.diversify.com Website Applications
==================================================
On 14 Feb 2005 12:32:16 -0800, "A.M. Wood"
<[email protected]> wrote:
>
>[email protected] wrote:
>> FWW, april 2005, methods of work.
>>
>>
>> : ^ )
>
>Congratulations! I think. Besides using melamine instead of phenolic
>plastic for the base, how is your jig different than the
>"Flush-Trimming Baseplate" detailed on pages 119 - 123 in Bill Hylton's
>Router Magic?
I don't know... it might be the same. I'll have to check that book
out.
On Sat, 12 Feb 2005 11:31:31 -0700, [email protected] wrote:
>FWW, april 2005, methods of work.
Congrats!
Good idea!
Barry