I have read about a new bandsaw from Sears that sounds very interesting to
me. The most interesting thing is the price - $300. It even has a 7" resaw
capability though I have no plans to do resawing. A link is this:
http://www.sears.com/sr/javasr/product.do?BV_UseBVCookie=Yes&vertical=TOOL&pid=00922400000&subcat=Band+Saws
The article says: "With welded-steel construction, microadjustable
ball-bearing guides, a blade-tracking window, dual dust ports, and a 20" x
16" cast-iron table, the two speed Craftsman 22400 12" bandsaw specs more
like and 18" bandsaw" It also has a drift adjustable fence and built in
worklight.
I have been unable to find any on-line reviews because the saw is so new. If
someone on this group either has purchased the saw or does so in the future,
could you please post your comments?
TIA.
Dick Snyder
I spent alot of time looking at band saws my self, plus I talked to
quite a few wood workers of many types. I looked at American made
Delta's, plus Jets. It came down to 4 saw's Craftsman 12" or
14". Jet 14" and a older 14" Delta USA made a friend
had for sale. When I walked in to Sear's and saw the 12"
Craftsman it won by a land side. There is no saw build today that can
touch it with all that Craftsman offers with there saw. Plus for only
$80 bucks you can get a 5 year warranty that covers everything but
the blade. No other Mfg can touch that, or offers that kind of
coverage, not ever close. You could resaw the Cascade Forest and if
it breaks down your covered. So anyone who complains about there
Craftsman saw must have missed the boat on there buy.(should have got
the warranty) As far as the blades go there easy to get. I have found
2 companys that sell the blades in a huge assortment of sizes(very
good prices also). So you just need to have a few back ups on the
wall. It is a wonderful saw. Study a few other saws out there, and go
see them. Then go see the Craftsman 12" band saw, it looks like
most $700 to $800 or better easy. Built like a tank. I am not sure
who built the saw for Sears, but it is outstanding. I am around tools
alot. I run a tool dept for Lowe's. I see many type's of tools day in
and day out. My only regret is that Lowe's doesn't carry that type of
quality in saw's.
Thanks for your 3 cents worth! You have me thinking hard - I appreciate the
ideas.
Dick
"Clint" <[email protected]> wrote in message
news:cxSef.147336$Io.3826@clgrps13...
> Here's my thoughts. I'll prefix this by saying I have a Delta 14", not a
> Grizzly or Sears. But I'd much rather spend the extra $100 on the Grizzly
> 555 saw (http://www.grizzly.com/products/item.aspx?itemnumber=G0555). I
> realize that shipping would be extra (although Sears charges shipping if
> you require it), but you might save tax.
>
> In any case, you'd get a more powerful motor (10 amps vs 7 for the Sears),
> you get a "real" saw (one that's got a number of reviews, mostly
> positive), and you'd have a fighting chance of actually using the 6" of
> space under the blade guard. Plus you can add a riser block if you like.
> The Sears may have 7", but I really doubt you'd be able to cut 7" of
> anything besides balsa wood. I've got a Delta, as I mentioned, with a 10
> or 11 amp motor, and it really struggles to cut more than 6" of any harder
> wood. Oh yeah, you'll be able to find blades easier for the 14" saw than
> the 12".
>
> That's just MHO, your mileage will vary, standard disclaimers apply...
> Look at it this way. If you spend the extra $100, and the saw lasts you
> for 10 years, that's $10/year. Less than $1/month, or $0.03 per day.
> Surely you can find 3 pennies for this? :)
>
> --
> Clint
> "Dick Snyder" <[email protected]> wrote in message
> news:[email protected]...
>>I have read about a new bandsaw from Sears that sounds very interesting to
>>me. The most interesting thing is the price - $300. It even has a 7" resaw
>>capability though I have no plans to do resawing. A link is this:
>>
>> http://www.sears.com/sr/javasr/product.do?BV_UseBVCookie=Yes&vertical=TOOL&pid=00922400000&subcat=Band+Saws
>>
>> The article says: "With welded-steel construction, microadjustable
>> ball-bearing guides, a blade-tracking window, dual dust ports, and a 20"
>> x 16" cast-iron table, the two speed Craftsman 22400 12" bandsaw specs
>> more like and 18" bandsaw" It also has a drift adjustable fence and built
>> in worklight.
>>
>> I have been unable to find any on-line reviews because the saw is so new.
>> If someone on this group either has purchased the saw or does so in the
>> future, could you please post your comments?
>>
>> TIA.
>>
>> Dick Snyder
>>
>
>
Adam Jawer <[email protected]> wrote in
news:[email protected]:
> Re: Craftsman 12" Bandsaw Sears item #00922400000 Mfr. model #BAS300
>
> I bought one of these and it seemed like a real steal except for the
> following fact. It is almost IMPOSSIBLE to find 89 1/2" blades that this
> saw takes. Sears does not carry them. THe only place that I found on the
> web claims that they are out of stock due to high demand from new owners
> of this model needing blades. As far as I can find, this is the ONLY
> bandsaw in the marktplace that uses this odd blade size. Do yourself a
> favor and get the next model up (14 inch). THe saw performs fine but I
> have only been able to use it with the included stamped steel 1/2 inch
> blade which pretty much limits it's usability.
>
> -Adam
>
Many local sharpening services can make up bandsaw bulk stock to the size
you need. Give them a call.
If not, try one of the national shops advertised in the back of your
favorite woodworking magazine.
Probably save a nickle or two as well.
Patriarch
Re: Craftsman 12" Bandsaw Sears item #00922400000 Mfr. model #BAS300
I bought one of these and it seemed like a real steal except for the
following fact. It is almost IMPOSSIBLE to find 89 1/2" blades that this
saw takes. Sears does not carry them. THe only place that I found on the
web claims that they are out of stock due to high demand from new owners
of this model needing blades. As far as I can find, this is the ONLY
bandsaw in the marktplace that uses this odd blade size. Do yourself a
favor and get the next model up (14 inch). THe saw performs fine but I
have only been able to use it with the included stamped steel 1/2 inch
blade which pretty much limits it's usability.
-Adam
"Dick Snyder" <[email protected]> wrote in
news:[email protected]:
> I have read about a new bandsaw from Sears that sounds very
> interesting to me. The most interesting thing is the price - $300. It
> even has a 7" resaw capability though I have no plans to do resawing.
> A link is this:
>
> http://www.sears.com/sr/javasr/product.do?BV_UseBVCookie=Yes&vertical=T
> OOL&pid=00922400000&subcat=Band+Saws
>
> The article says: "With welded-steel construction, microadjustable
> ball-bearing guides, a blade-tracking window, dual dust ports, and a
> 20" x 16" cast-iron table, the two speed Craftsman 22400 12" bandsaw
> specs more like and 18" bandsaw" It also has a drift adjustable fence
> and built in worklight.
>
> I have been unable to find any on-line reviews because the saw is so
> new. If someone on this group either has purchased the saw or does so
> in the future, could you please post your comments?
>
> TIA.
>
> Dick Snyder
>
>
Here's my thoughts. I'll prefix this by saying I have a Delta 14", not a
Grizzly or Sears. But I'd much rather spend the extra $100 on the Grizzly
555 saw (http://www.grizzly.com/products/item.aspx?itemnumber=G0555). I
realize that shipping would be extra (although Sears charges shipping if you
require it), but you might save tax.
In any case, you'd get a more powerful motor (10 amps vs 7 for the Sears),
you get a "real" saw (one that's got a number of reviews, mostly positive),
and you'd have a fighting chance of actually using the 6" of space under the
blade guard. Plus you can add a riser block if you like. The Sears may
have 7", but I really doubt you'd be able to cut 7" of anything besides
balsa wood. I've got a Delta, as I mentioned, with a 10 or 11 amp motor,
and it really struggles to cut more than 6" of any harder wood. Oh yeah,
you'll be able to find blades easier for the 14" saw than the 12".
That's just MHO, your mileage will vary, standard disclaimers apply... Look
at it this way. If you spend the extra $100, and the saw lasts you for 10
years, that's $10/year. Less than $1/month, or $0.03 per day. Surely you
can find 3 pennies for this? :)
--
Clint
"Dick Snyder" <[email protected]> wrote in message
news:[email protected]...
>I have read about a new bandsaw from Sears that sounds very interesting to
>me. The most interesting thing is the price - $300. It even has a 7" resaw
>capability though I have no plans to do resawing. A link is this:
>
> http://www.sears.com/sr/javasr/product.do?BV_UseBVCookie=Yes&vertical=TOOL&pid=00922400000&subcat=Band+Saws
>
> The article says: "With welded-steel construction, microadjustable
> ball-bearing guides, a blade-tracking window, dual dust ports, and a 20" x
> 16" cast-iron table, the two speed Craftsman 22400 12" bandsaw specs more
> like and 18" bandsaw" It also has a drift adjustable fence and built in
> worklight.
>
> I have been unable to find any on-line reviews because the saw is so new.
> If someone on this group either has purchased the saw or does so in the
> future, could you please post your comments?
>
> TIA.
>
> Dick Snyder
>
"Dick Snyder" <[email protected]> wrote in message
news:[email protected]...
>>> could you please post your comments?<<<
I saw one recently, wasn't interested (still using my 20 yr old 12in Sears)
so didn't look it over real close but will say that it looked better than
any band saw that Sears has produced in recent years. RM~