I've built a frame and doors that go over a closet area. Two pairs of
doors 27" wide and 92" tall, 3/4" birch plywood. The problem is that the
doors are very bowed; at the bottom one door protrudes almost 1 1/2"
from the other.
Anyone have any experience with this challenge and successful fix?
Many thanks!
Alain
"A.Pismo Clam" <Alaininvc@'86DASPAMnetscape.net> writes:
> I've built a frame and doors that go over a closet area. Two pairs of
> doors 27" wide and 92" tall, 3/4" birch plywood. The problem is that
> the doors are very bowed; at the bottom one door protrudes almost 1
> 1/2" from the other.
>
> Anyone have any experience with this challenge and successful fix?
Didn't you post the very same question a few days ago? The answer is
still the same: Make new doors of a suitable material, core board for
preference if you want flat doors, or build a torsion box with thin
plywood.
--
Dr. Juergen Hannappel http://lisa2.physik.uni-bonn.de/~hannappe
mailto:[email protected] Phone: +49 228 73 2447 FAX ... 7869
Physikalisches Institut der Uni Bonn Nussallee 12, D-53115 Bonn, Germany
CERN: Phone: +412276 76461 Fax: ..77930 Bat. 892-R-A13 CH-1211 Geneve 23