I bought a Ryobi jobsite 10" tablesaw last month, model BTS20R, the
collapsable
kind on wheels. It works really well for the most part, although
somewhat
flimsily made. During assembly I noticed that they give you an option
in the
instructions to line up the blade assembly with the table. Mine was
out of
aligment so I made the adjustment. Yesterday I came out to the shop to
find that
it had wandered off about 1/8" from the front to the back of the blade
and had to
readjust. I'd like to know if anyone else has experienced this problem
and what
they may have done to correct it. One thing I was to replace the
hard-to-get-to
and hard-to-tighten phillips screws that pin the blade assembly to the
front of
the table with hex head screws.