I bought a box of finish nails (from the BORG) last week to install
some light-painted crown molding. The nails are labeled "bright" but
are not shiny like they used to be. They are covered with grease or
graphite or something that gives them a dull gray color. The nails
are turning my fingers black and leaves marks on the molding/walls. I
end up washing my hands with Lava soap and cleaning the walls/molding
every two hours. Anyone know about this stuff? I believe it is a
coating to prevent rust but I'm not sure. Finish nails used to be
clean.
Phisherman wrote:
> I bought a box of finish nails (from the BORG) last week to install
> some light-painted crown molding. The nails are labeled "bright" but
> are not shiny like they used to be. They are covered with grease or
> graphite or something that gives them a dull gray color. The nails
> are turning my fingers black and leaves marks on the molding/walls. I
> end up washing my hands with Lava soap and cleaning the walls/molding
> every two hours. Anyone know about this stuff? I believe it is a
> coating to prevent rust but I'm not sure. Finish nails used to be
> clean.
Probably its similar to the yucky black stuff on black iron pipe,
leftover lubricant from the manufacturing process.
You've probably seen the cement used on sinkers, it isn't that,
is it.
--
FF
"Phisherman" <[email protected]> wrote in message
news:[email protected]...
>I bought a box of finish nails (from the BORG) last week to install
> some light-painted crown molding. The nails are labeled "bright" but
> are not shiny like they used to be. They are covered with grease or
> graphite or something that gives them a dull gray color. The nails
> are turning my fingers black and leaves marks on the molding/walls. I
> end up washing my hands with Lava soap and cleaning the walls/molding
> every two hours. Anyone know about this stuff? I believe it is a
> coating to prevent rust but I'm not sure. Finish nails used to be
> clean.
Not all nails are created equally. I see differences in name brand nails
and house or generic brands and this is not limited to finish nails. I
suspect that if you bought a house brand nail that the supplier may have
changed.
On Sun, 17 Sep 2006 22:04:35 -0700, "Bob Meyer" <[email protected]>
wrote:
>
><[email protected]> wrote in message
>news:[email protected]...
>>
>> Phisherman wrote:
>>> I bought a box of finish nails (from the BORG) last week to install
>>> some light-painted crown molding. The nails are labeled "bright" but
>>> are not shiny like they used to be. They are covered with grease or
>>> graphite or something that gives them a dull gray color. The nails
>>> are turning my fingers black and leaves marks on the molding/walls. I
>>> end up washing my hands with Lava soap and cleaning the walls/molding
>>> every two hours. Anyone know about this stuff? I believe it is a
>>> coating to prevent rust but I'm not sure. Finish nails used to be
>>> clean.
>>
>> Probably its similar to the yucky black stuff on black iron pipe,
>> leftover lubricant from the manufacturing process.
>>
>> You've probably seen the cement used on sinkers, it isn't that,
>> is it.
>>
>> --
>>
>> FF
>>
>Had the same experience. Dirty hands, and worse, dirty molding. Laid the
>nails on a paper towel, poured on a little paint thinner. Rubbed
>with another towel. Cleaned them up fine.
>
>Bob
>
Thanks Bob. I rinsed 5 pounds of nails three times in paint thinner,
dumped them into a bucket of sawdust, then retrieved the nails with a
giant magnet. Now my finish nails and painted molding are clean.
After 30 years of woodworking this is a first washing finishing nails.
Learn something new everyday.
"Bob Meyer" <[email protected]> wrote in message
news:vNpPg.5433$y61.4226@fed1read05...
>
> <[email protected]> wrote in message
> news:[email protected]...
>>
>> Phisherman wrote:
>>> I bought a box of finish nails (from the BORG) last week to install
>>> some light-painted crown molding. The nails are labeled "bright" but
>>> are not shiny like they used to be. They are covered with grease or
>>> graphite or something that gives them a dull gray color. The nails
>>> are turning my fingers black and leaves marks on the molding/walls. I
>>> end up washing my hands with Lava soap and cleaning the walls/molding
>>> every two hours. Anyone know about this stuff? I believe it is a
>>> coating to prevent rust but I'm not sure. Finish nails used to be
>>> clean.
>>
>> Probably its similar to the yucky black stuff on black iron pipe,
>> leftover lubricant from the manufacturing process.
>>
>> You've probably seen the cement used on sinkers, it isn't that,
>> is it.
>>
>> --
>>
>> FF
>>
> Had the same experience. Dirty hands, and worse, dirty molding. Laid the
> nails on a paper towel, poured on a little paint thinner. Rubbed
> with another towel. Cleaned them up fine.
>
Which is why I buy my nails from the lumber store. They are cheaper, better
quality and I can buy the quantity I want.
'Phish' . . .
Let me take a crack at this . . .
I use screws {typically Stainless & 'square drive'}rather then nails,
however I still 'wander the aisle's at the local Blue & Orange 'Borg's ' .
Whether it is there, or any of the great 'America Brand' stores, you can't
help but notice that more & more items are 'Made in China'. {Sometimes you
have to be a bit 'paranoid' and look at the fine print . . . but it's
there}. It has always bothered me that so much simple, yet HEAVY, stuff
could be so cheap . . . considering the cost of long distance shipping.
I order my 'square drive' screws McFeeley's. They are very 'up front' in
their catalog descriptions . . . and where an item may come from. Also how
they are prepped for shipment. Steel screws are a relatively 'simple' item .
. . nails even more so. Yet they are inherently 'heavy'. 'Sea Shipment' - to
paraphrase . . .the proverbial 'Slow boat *from* China' - is the most
cost-efficient. One of the 'preps' is a coating to prevent rusting during
the voyage. THAT may be what is on the 'dirty' nails. {No matter what brand
name is on the box !!}
Regards,
Ron Magen
Backyard Boatshop
"Phisherman" <[email protected]> wrote in message
news:[email protected]...
> I bought a box of finish nails (from the BORG) last week to install
> some light-painted crown molding. The nails are labeled "bright" but
> are not shiny like they used to be. They are covered with grease or
> graphite or something that gives them a dull gray color. The nails
> are turning my fingers black and leaves marks on the molding/walls. I
> end up washing my hands with Lava soap and cleaning the walls/molding
> every two hours. Anyone know about this stuff? I believe it is a
> coating to prevent rust but I'm not sure. Finish nails used to be
> clean.
Ron, The nail I bought are indeed "Made in China" and I won't be
buying any more of those. I need to put together an order from
McFeeley's. Life is too short to be cleaning dirty fasteners! Clothes
and shoes "Made in China" is fine but I'm staying away from metal
items made from there from now on. Thanks.
On Mon, 18 Sep 2006 14:23:39 GMT, "Ron Magen" <[email protected]>
wrote:
>'Phish' . . .
>
>Let me take a crack at this . . .
>
>I use screws {typically Stainless & 'square drive'}rather then nails,
>however I still 'wander the aisle's at the local Blue & Orange 'Borg's ' .
>Whether it is there, or any of the great 'America Brand' stores, you can't
>help but notice that more & more items are 'Made in China'. {Sometimes you
>have to be a bit 'paranoid' and look at the fine print . . . but it's
>there}. It has always bothered me that so much simple, yet HEAVY, stuff
>could be so cheap . . . considering the cost of long distance shipping.
>
>I order my 'square drive' screws McFeeley's. They are very 'up front' in
>their catalog descriptions . . . and where an item may come from. Also how
>they are prepped for shipment. Steel screws are a relatively 'simple' item .
>. . nails even more so. Yet they are inherently 'heavy'. 'Sea Shipment' - to
>paraphrase . . .the proverbial 'Slow boat *from* China' - is the most
>cost-efficient. One of the 'preps' is a coating to prevent rusting during
>the voyage. THAT may be what is on the 'dirty' nails. {No matter what brand
>name is on the box !!}
>
>Regards,
>Ron Magen
>Backyard Boatshop
>
>"Phisherman" <[email protected]> wrote in message
>news:[email protected]...
>> I bought a box of finish nails (from the BORG) last week to install
>> some light-painted crown molding. The nails are labeled "bright" but
>> are not shiny like they used to be. They are covered with grease or
>> graphite or something that gives them a dull gray color. The nails
>> are turning my fingers black and leaves marks on the molding/walls. I
>> end up washing my hands with Lava soap and cleaning the walls/molding
>> every two hours. Anyone know about this stuff? I believe it is a
>> coating to prevent rust but I'm not sure. Finish nails used to be
>> clean.
>
<[email protected]> wrote in message
news:[email protected]...
>
> Phisherman wrote:
>> I bought a box of finish nails (from the BORG) last week to install
>> some light-painted crown molding. The nails are labeled "bright" but
>> are not shiny like they used to be. They are covered with grease or
>> graphite or something that gives them a dull gray color. The nails
>> are turning my fingers black and leaves marks on the molding/walls. I
>> end up washing my hands with Lava soap and cleaning the walls/molding
>> every two hours. Anyone know about this stuff? I believe it is a
>> coating to prevent rust but I'm not sure. Finish nails used to be
>> clean.
>
> Probably its similar to the yucky black stuff on black iron pipe,
> leftover lubricant from the manufacturing process.
>
> You've probably seen the cement used on sinkers, it isn't that,
> is it.
>
> --
>
> FF
>
Had the same experience. Dirty hands, and worse, dirty molding. Laid the
nails on a paper towel, poured on a little paint thinner. Rubbed
with another towel. Cleaned them up fine.
Bob