I have one of these fine drop saws, which has lost the little bit that
stops the table rotating. I got a copy of the diagram of the machine
from Ryobi but it isn't in the exploded drawing, or it's parts list. I
was wondering if any contributer to this group has the same or similar
model saw and could email me a photo of the missing part.
regards
Andrew
On Sep 13, 10:34 pm, Andrew <[email protected]> wrote:
> I have one of these fine drop saws, which has lost the little bit that
> stops the table rotating. I got a copy of the diagram of the machine
> from Ryobi but it isn't in the exploded drawing, or it's parts list. I
> was wondering if any contributer to this group has the same or similar
> model saw and could email me a photo of the missing part.
>
> regards
>
> Andrew
Have you tried http://ryobitools.arinet.com/scripts/EmpartISAPI.dll?MF
Or you can go in through the Ryobi Tools site.
I couldn't pull up a part for you, because it needs a description or
part number, as well as the saw model number. Give it a try with the
description, or back out and see if they have a better drawing on the
site.
Log onto the manuafacturers site and get hold of the schematics for your
tool. Most companies have all the parts data available for free.
Good luck
Peter
"Andrew" <[email protected]> wrote in message
news:[email protected]...
>I have one of these fine drop saws, which has lost the little bit that
>stops the table rotating. I got a copy of the diagram of the machine from
>Ryobi but it isn't in the exploded drawing, or it's parts list. I was
>wondering if any contributer to this group has the same or similar model
>saw and could email me a photo of the missing part.
>
> regards
>
> Andrew