My Martha Stewart Hardwood Chopping Block (with four rubber
feet) splits in two after we left it in the rain. Here's how it begins. Over
time, the glues near the edges dry up creating gaps along the edges,
much like pine cones splitting under heat. The chopping block then
begins to show signs of splitting which eventually breaks in half under
a heavy storm.
I drill and insert several wooden dowel pins up and down the block. I
then join both halves together. I use no glue or preserving oil because I
couldn't find any food-grade glues or oils. I can see that it's a matter
of time before it breaks again, but elsewhere. What is a practical way
to keep a chopping block from splitting?
Thanks
Chopping blocks were traditionally made with end grain blocks and
held together with an outside frame, no glue being used, i think birch
was the wood of choice. Cleaning was a good scrubbing with salt, no
matter the gaps. What we have now is cheap mass produced items not
deserving to be called chopping blocks. YPFWYG
Tim Zimmerman wrote:
> My Martha Stewart Hardwood Chopping Block (with four rubber
> feet) splits in two after we left it in the rain.
*snip*
> What is a practical way
> to keep a chopping block from splitting?
>
> Thanks
Well, if you're going to leave it outside in the rain, I'd say go with
something like Thompson's water sealer or a similar product if you want
to keep a natural finish. Otherwise, a good coat of paint will do the
trick. Not sure about using it for food after that, but I probably
wouldn't chop up anything for the dinner table on a board I kept
outside anyway so that wouldn't be an issue from my perspective.
Doubt it is somehow defective as some have mentioned. I would imagine
any piece of wood furniture is going to split and crack if you leave it
outside unprotected from the elements. That kind of use is well
outside the scope of what the manufacturer intended and it seems kind
of unethical to return it as somehow defective.
Titebond II is food safe once cured
Water intrusion is the bane of any glue up. The expansion is stronger
than most any mechanical or adhesive conection can bear. Leave you
dining room table out in the rain and see what happens.
You need to keep it oiled with mineral oil. If you can't find it at a
culinary shop then the pharmacy should have it, it's a wonderful stool
softner and isn't bad over ice cream ;^)
You can disenfect your cutting board with a warm water and vinegar
mixture.
Tim Zimmerman wrote:
> My Martha Stewart Hardwood Chopping Block (with four rubber
> feet) splits in two after we left it in the rain. Here's how it begins. Over
> time, the glues near the edges dry up creating gaps along the edges,
> much like pine cones splitting under heat. The chopping block then
> begins to show signs of splitting which eventually breaks in half under
> a heavy storm.
>
> I drill and insert several wooden dowel pins up and down the block. I
> then join both halves together. I use no glue or preserving oil because I
> couldn't find any food-grade glues or oils. I can see that it's a matter
> of time before it breaks again, but elsewhere. What is a practical way
> to keep a chopping block from splitting?
>
> Thanks
>
>
>
>
>
>
>
Don't soak it. Mineral oil is nice for cutting boards, but I would not
try to "load" it, only a surface coating. Leaving the board in the rain
may have warped the wood to the extent that it will not glue together
again without shaping the sides that should fit together. Wood glue or
contact cement should work. When I clean wood cutting boards, I use a
3M scrubber with hot soapy water, scrub right away, rinse with cool
water and stand it in the sink to dry.
I would not use it if there are gaps between the blocks of wood, as they
can trap food and bacteria.
Tim Said:
<Snips her and there)
> The chopping block then begins to show signs of splitting which eventually
> breaks > in half under a heavy storm.
>What is a practical way
> to keep a chopping block from splitting?
>
> Thanks
>
Fix your roof!
Dave
Posted Via Usenet.com Premium Usenet Newsgroup Services
----------------------------------------------------------
** SPEED ** RETENTION ** COMPLETION ** ANONYMITY **
----------------------------------------------------------
http://www.usenet.com
I have seen some of those edge grain monsters that were 12 inches thick and
the individual planks were dovetailed side by side. Every board had a
dovetail on all 4 sides.
max
> First you need to glue it. Aliphatic glue will be fine. Don't worry
> about the food issue.
> What do you think it was glued with to begin with?
>
> Next the glue isn't drying near the edges, the wood is shrinking at the
> edges faster than the center. So it pulls away from each other.
> Don't leave it out in the rain.
> Blocks are meant for wet, but not soaking use. Doweling it will help,
> but glue the dowels.
>
> Use mineral oil to protect the wood all around. The top will wear but
> the sides will appreciate it. A single coating will do.
>
> BTW someone mentioned that the blocks were originally made with frames.
> Maybe some, but some of the professional versions I had seen 30 and 40
> years ago where just big solid chunks of end grain glued together. No
> frames.. Would love to have one of those monsters today...
>
>
> Tim Zimmerman wrote:
>> My Martha Stewart Hardwood Chopping Block (with four rubber
>> feet) splits in two after we left it in the rain. Here's how it begins. Over
>> time, the glues near the edges dry up creating gaps along the edges,
>> much like pine cones splitting under heat. The chopping block then
>> begins to show signs of splitting which eventually breaks in half under
>> a heavy storm.
>>
>> I drill and insert several wooden dowel pins up and down the block. I
>> then join both halves together. I use no glue or preserving oil because I
>> couldn't find any food-grade glues or oils. I can see that it's a matter
>> of time before it breaks again, but elsewhere. What is a practical way
>> to keep a chopping block from splitting?
>>
>> Thanks
>>
>>
>>
>>
>>
>>
>>
if left in the weather it will split - end of story - end of chopping
block - extra virgin olive oil can be used to seal it.
Steve - Australia, land of sun
"SonomaProducts.com" <[email protected]> wrote in message
news:[email protected]...
> Titebond II is food safe once cured
>
> Water intrusion is the bane of any glue up. The expansion is stronger
> than most any mechanical or adhesive conection can bear. Leave you
> dining room table out in the rain and see what happens.
>
> You need to keep it oiled with mineral oil. If you can't find it at a
> culinary shop then the pharmacy should have it, it's a wonderful stool
> softner and isn't bad over ice cream ;^)
>
> You can disenfect your cutting board with a warm water and vinegar
> mixture.
>
"toller" <[email protected]> wrote in message news:[email protected]...<snip>
> Must be a darn nice chopping block to be worth that much trouble. And what
> does breaking in half in a heavy storm mean?
We just left it on a deck of a boat, like most fisherman do. A nasty weather
crumbles it under its own weight. Saw one for $90, I wonder if this one
will last. I will coat it with white mineral oil or EV olive oil.
> I can't imagine why you left it in the rain, but chopping blocks should use
> waterproof glue. If it split, it is defective.
Aren't chopping blocks water-proof? Aren't they meant for UV-lights, salts,
vibrations or normal fisherman abuses? And you say it isn't suppose break,
even left out on a boat?
Must be a darn nice chopping block to be worth that much trouble. And what
does breaking in half heavy a heavy storm mean? Well, I will give you the
benefit of the doubt.
I can't imagine why you left it in the rain, but chopping blocks should use
waterproof glue. If it split, it is defective. Take it back. If it is MS,
KMart can hardly doubt you bought it there.
"Tim Zimmerman" <[email protected]> wrote in
news:[email protected]:
> "toller" <[email protected]> wrote in message
> news:[email protected]...<snip>
>
>> Must be a darn nice chopping block to be worth that much trouble. And
>> what does breaking in half in a heavy storm mean?
>
> We just left it on a deck of a boat, like most fisherman do. A nasty
> weather crumbles it under its own weight. Saw one for $90, I wonder if
> this one will last. I will coat it with white mineral oil or EV olive
> oil.
>
>> I can't imagine why you left it in the rain, but chopping blocks
>> should use waterproof glue. If it split, it is defective.
>
> Aren't chopping blocks water-proof? Aren't they meant for UV-lights,
> salts, vibrations or normal fisherman abuses? And you say it isn't
> suppose break, even left out on a boat?
>
>
Chopping blocks(butcher blocks) were never meant to be left outdoors in the
weather.
--
Jim Yanik
jyanik
at
kua.net
white mineral oil.
randy
"Tim Zimmerman" <[email protected]> wrote in message
news:[email protected]...
> My Martha Stewart Hardwood Chopping Block (with four rubber
> feet) splits in two after we left it in the rain. Here's how it begins.
> Over
> time, the glues near the edges dry up creating gaps along the edges,
> much like pine cones splitting under heat. The chopping block then
> begins to show signs of splitting which eventually breaks in half under
> a heavy storm.
>
> I drill and insert several wooden dowel pins up and down the block. I
> then join both halves together. I use no glue or preserving oil because I
> couldn't find any food-grade glues or oils. I can see that it's a matter
> of time before it breaks again, but elsewhere. What is a practical way
> to keep a chopping block from splitting?
>
> Thanks
>
>
>
>
>
>
>
On Fri, 18 Feb 2005 07:07:04 +0000, Tim Zimmerman wrote:
> My Martha Stewart Hardwood Chopping Block
I turned my split k-mart MSHCB into a number of shop jigs, fixtures, and
tool handles. I then went to Williams Sonoma and got a real one for the
kitchen.
--
"Keep your ass behind you"
vladimir a t mad {dot} scientist {dot} com
On Sat, 19 Feb 2005 08:18:31 +1100, mindesign wrote:
> if left in the weather it will split - end of story - end of chopping
> block - extra virgin olive oil can be used to seal it.
Extra virgin will go rancid. (DAMHIKT) If you're going to use olive oil
(which I do, or canola, whichever is handy), use "pure" olive oil which is
much more refined.
--
Luigi
Replace "nonet" with "yukonomics" for real email
www.yukonomics.ca/wooddorking/humour.html
www.yukonomics.ca/wooddorking/antifaq.html
First you need to glue it. Aliphatic glue will be fine. Don't worry
about the food issue.
What do you think it was glued with to begin with?
Next the glue isn't drying near the edges, the wood is shrinking at the
edges faster than the center. So it pulls away from each other.
Don't leave it out in the rain.
Blocks are meant for wet, but not soaking use. Doweling it will help,
but glue the dowels.
Use mineral oil to protect the wood all around. The top will wear but
the sides will appreciate it. A single coating will do.
BTW someone mentioned that the blocks were originally made with frames.
Maybe some, but some of the professional versions I had seen 30 and 40
years ago where just big solid chunks of end grain glued together. No
frames.. Would love to have one of those monsters today...
Tim Zimmerman wrote:
> My Martha Stewart Hardwood Chopping Block (with four rubber
> feet) splits in two after we left it in the rain. Here's how it begins. Over
> time, the glues near the edges dry up creating gaps along the edges,
> much like pine cones splitting under heat. The chopping block then
> begins to show signs of splitting which eventually breaks in half under
> a heavy storm.
>
> I drill and insert several wooden dowel pins up and down the block. I
> then join both halves together. I use no glue or preserving oil because I
> couldn't find any food-grade glues or oils. I can see that it's a matter
> of time before it breaks again, but elsewhere. What is a practical way
> to keep a chopping block from splitting?
>
> Thanks
>
>
>
>
>
>
>
"Tim Zimmerman" <[email protected]> wrote in message
news:[email protected]...
> My Martha Stewart Hardwood Chopping Block (with four rubber
> feet) splits in two after we left it in the rain. Here's how it begins.
> Over
> time, the glues near the edges dry up creating gaps along the edges,
> much like pine cones splitting under heat. The chopping block then
> begins to show signs of splitting which eventually breaks in half under
> a heavy storm.
>
> I drill and insert several wooden dowel pins up and down the block. I
> then join both halves together. I use no glue or preserving oil because I
> couldn't find any food-grade glues or oils. I can see that it's a matter
> of time before it breaks again, but elsewhere. What is a practical way
> to keep a chopping block from splitting?
Take care of it. Don't leave it in the rain...
>
> Thanks
>
>
>
>
>
>
>