I am considering incorporating a drafting table into a set of built in
bookcases that I am getting ready to make. The first design question that
popped into my head was an odd one. Is the lip at the bottom of the
drafting table, the one that the triangles and such rest on, of any
particular dimension? Does it need to be a particular height above the
table or a particular thickness?
I have little experience with drafting tables, obviously, but I thought it
might be nice to have. I just bought my wife a mat cutting system (from Lee
Valley of course) for Christmas and thought it might be a good work surface
as well as my using it for drawing plans. My last project really taught me
the value of drawings of a project.
SteveP.
"Highland Pairos" <[email protected]> wrote in message
news:[email protected]...
> This all makes great sense. Thank you to one and all for your insights.
> I think I will leave off the ledge for comfort, and perhaps work in a
> better way to hold pencils etc.
>
> Now the next challenge will be working out the folding mechanism.
> Probably not a big deal.
>
I like the sliding parallel rule. Although I do most all of my drafting on
the computer, I still like to draft on real velum. At home I use a smaller
folding table 30x42 with the parallel rule. In my office I have a large
43x72 power table with a track drafting machine. Now all it does is make a
grate layout table for reviewing plans developed in AutoCAD.
The folding table gets little use but I would recommend a good drawing board
cover. They will also work great when your wife uses it to cut mats on.
Dave
Posted Via Usenet.com Premium Usenet Newsgroup Services
----------------------------------------------------------
** SPEED ** RETENTION ** COMPLETION ** ANONYMITY **
----------------------------------------------------------
http://www.usenet.com
To answer your first question, there should not be a raised rail at the
bottom of your table. It just gets in the way and cuts into your arms
as you draw. A shallow tray routed in the base rail will work fine.
As to the comments about CAD being so neat, I did drafting for over
fifty years. My work was unmistakeable. While leafing through some old
highway plans at the highway dept., a set that I had drawn up in the
early fifties literally jumped out at me. The use of line weights and a
distinctive lettering style made it stand out. When a car accident
disabled me, I had to learn CAD. Although I still utilize the options
for varying line weights, there is nothing to be said for the lettering
fonts. My drawings no longer have any character. Everyone should learn
at least basic drafting and lettering, if only to make preliminary
sketches in the field.
[rant turned off]
Bugs
I seem to have fallen into a nest of old draftsmen/persons? like
myself. Probably the last coven of a dying breed. We did some great
things in our time. Drew up a coast-to-coast highway sytem, put men on
the moon, designed a vast array of domestic gadgets, and advanced
automation to a level that has replaced us.
Too bad there isn't someone coming up to replace the thinking that went
into those drawings.
Merry Christmas/Happy Hanukah, etc. etc.
Bugs
"Highland Pairos" <[email protected]> wrote in message
news:[email protected]...
>I am considering incorporating a drafting table into a set of built in
>bookcases that I am getting ready to make. The first design question that
>popped into my head was an odd one. Is the lip at the bottom of the
>drafting table, the one that the triangles and such rest on, of any
>particular dimension? Does it need to be a particular height above the
>table or a particular thickness?
>
> I have little experience with drafting tables, obviously, but I thought it
> might be nice to have. I just bought my wife a mat cutting system (from
> Lee Valley of course) for Christmas and thought it might be a good work
> surface as well as my using it for drawing plans. My last project really
> taught me the value of drawings of a project.
>
> SteveP.
>
http://www.grant-ent.com/mayline/futur-matic.htm
http://www.draftingequipment.com/DEW/products/tables/mayline/maylinefutur.htm
http://www.draftingequipment.com/DEW/products/tables/mayline/maylinefutur.htm
Why not get the top-of-the-line above with the special light attached to the
drafting machine in a garage sale for around $100! Lots of those around -
everyone converted to CAD years ago, so not much demand for tables and
associated drawing devices. That motor operated table is so nice and
drafting machine is sweet and smooth where once sold for perhaps over
$4,000!
Highland Pairos (in [email protected]) said:
| I assumed that it was necessary for setting a triangle 90 deg to a
| t-square that is set along the edge.
In the time before CAD, drafting machines, and sliding parallel rule,
the sides were the reference edges for T-square use. The T-square
registered against the side of the table and triangles then rested
against the T-square. The better tables were fitted with inlet steel
channels for the head of the T-square to bear against.
As Leon points out, a pencil ledge at the bottom of the table is
really uncomfortable; and after breaking enough pencil leads, one
learns to put things down so they don't roll. For those who had
learning disabilities, there were all kinds of anti-roll/anti-skid
accessories that could be bought.
For the kind of work that might still be done manually, it might be
worth DAGS for "taboretr" (I found
<http://www.draftingequipment.com/DEW/products/filing/gallery_files_an
d_taborets.htm>). These are small rolling carts that hold and store
art paraphernalia. Building one of these little critters has been on
my want-to-do list for a long time.
--
Morris Dovey
DeSoto Solar
DeSoto, Iowa USA
http://www.iedu.com/DeSoto/solar.html
"Highland Pairos" <[email protected]> wrote in message
news:[email protected]...
>I am considering incorporating a drafting table into a set of built in
>bookcases that I am getting ready to make. The first design question that
>popped into my head was an odd one. Is the lip at the bottom of the
>drafting table, the one that the triangles and such rest on, of any
>particular dimension? Does it need to be a particular height above the
>table or a particular thickness?
LEAVE IT OFF. It is going to be very uncomfortable for you to rest your
arms on. My drafting table had a level spot at the top to place the
electric eraser, eraser pad, pencil sharpener, etc..
On Sat, 24 Dec 2005 01:49:42 GMT, "Highland Pairos"
<[email protected]> wrote:
>I am considering incorporating a drafting table into a set of built in
>bookcases that I am getting ready to make. The first design question that
>popped into my head was an odd one. Is the lip at the bottom of the
>drafting table, the one that the triangles and such rest on, of any
>particular dimension? Does it need to be a particular height above the
>table or a particular thickness?
The drafting tables I used to use had no rest for triangles and
drawing instruments. One simply avoided setting down pens and pencils
such that they would roll. The tables did have a 3/4 by 1-1/2 bar
across the front edge, flush with the top surface, attached with
spacers at each end to create a 1/4 slot for long paper to be fed down
through.
--
Chuck Taylor
http://home.hiwaay.net/~taylorc/contact/
Highland Pairos wrote:
> I assumed that it was necessary for setting a triangle 90 deg to a t-square
> that is set along the edge.
>
> Is this not so?
You may be able to set the triangle on the t-square.
I actually preferred the parallel-arm board version, where you had a
horizontal arm that moved up and down. That way you didn't have to
worry about keeping the t-square tight against the side.
Chris
"Highland Pairos" <[email protected]> wrote in message
news:[email protected]...
>I assumed that it was necessary for setting a triangle 90 deg to a t-square
>that is set along the edge.
>
> Is this not so?
You square the drawing paper to the T-Square. Then you set the triangle on
the top edge of the T-square. Some drawing desks have this ledge to keep
the drawing board from sliding off of the desk it the desk top angle is too
steep.
most commercial tables are adjustable because few people keep them at the
same angle all the time. Depends on what you are doing and how. About 15
degrees would be my preference if I was making it non adjustable. I solved
the problem some years ago. Gave away the drafting table and went completely
CAD.
"PDQ" <[email protected]> wrote in message
news:yfhrf.5138$%[email protected]...
is there a good/better/best angle of inclination at which to work.
--
PDQ
--
Holding it on the t-square makes sense now that it is mentioned. Obviously
that negates the need for relying on the squareness of the table.
SteveP.
"Leon" <[email protected]> wrote in message
news:[email protected]...
>
> "Chris" <[email protected]> wrote in message
> news:[email protected]...
>> Highland Pairos wrote:
>>> I assumed that it was necessary for setting a triangle 90 deg to a
>>> t-square that is set along the edge.
>>>
>>> Is this not so?
>>
>> You may be able to set the triangle on the t-square.
>
> Yes, YOU DO SET the triangle on the top edge of the T-square.
>
>>
>> I actually preferred the parallel-arm board version, where you had a
>> horizontal arm that moved up and down. That way you didn't have to worry
>> about keeping the t-square tight against the side.
>
> Once you have been drawing for a while using a T-square you can see if it
> is not parallel to the lines on the paper. Really not a problem because
> you always hold the t-square in place pulling it up snug against the edge
> of the drawing board.
>
>
>
>
>
I assumed that it was necessary for setting a triangle 90 deg to a t-square
that is set along the edge.
Is this not so?
SteveP.
"Leon" <[email protected]> wrote in message
news:[email protected]...
>
> "Highland Pairos" <[email protected]> wrote in message
> news:[email protected]...
>>I am considering incorporating a drafting table into a set of built in
>>bookcases that I am getting ready to make. The first design question that
>>popped into my head was an odd one. Is the lip at the bottom of the
>>drafting table, the one that the triangles and such rest on, of any
>>particular dimension? Does it need to be a particular height above the
>>table or a particular thickness?
>
>
> LEAVE IT OFF. It is going to be very uncomfortable for you to rest your
> arms on. My drafting table had a level spot at the top to place the
> electric eraser, eraser pad, pencil sharpener, etc..
>
"Bugs" <[email protected]> wrote in message
news:[email protected]...
>I seem to have fallen into a nest of old draftsmen/persons? like
> myself. Probably the last coven of a dying breed. We did some great
> things in our time. Drew up a coast-to-coast highway sytem, put men on
> the moon, designed a vast array of domestic gadgets, and advanced
> automation to a level that has replaced us.
> Too bad there isn't someone coming up to replace the thinking that went
> into those drawings.
> Merry Christmas/Happy Hanukah, etc. etc.
> Bugs
You know there is something that those of us that used to draw, recognizes
in other draftsmen. Hand writing. It is still very easy to spot an old
draftsman by his hand writing. I always get a smile when I start a
conversation with the question, Do you still draw.
Borco.
<carver3(remove)[email protected]> wrote in message
news:[email protected]...
>
> Drawing board covers are a multi-layer vinyl material with "self
> healing" qualities - they will recover nicely from compass holes and
> small cuts. However, I would not recommend extensive cutting as this
> will soon damage the cover and the cut marks will affect drawing.
>
> I believe Alvin makes one and you should be able to pick it up at most
> engineering/drafting supply stores (if any still exist). I have been
> doing all of my drafting on a computer for the last 15 years and
> haven't had the occasion to got to a supply store in that time. But
> then again, there's always the internet.
>
> HTH
> Bill
"Lew Hodgett" <[email protected]> wrote in message
news:[email protected]...
> Since printing was the standard on drawings, got to the point where I
> forgot how to form script letters because I didn't write anything anymore,
> I printed it.
LOL... My hand writing was terrible untill I started lettering sheets and
drawing in school. Magically my script hand writing transformed into a
rather "Girly" looking style. My printing was emaculate.
Today...If I try I can do pretty good.
> Today, I type.
>
I have been off the group for a few days. Tell me more about a "drawing
board cover".
SteveP.
"TeamCasa" <[email protected]> wrote in message
news:[email protected]...
>
> "Highland Pairos" <[email protected]> wrote in message
> news:[email protected]...
>> This all makes great sense. Thank you to one and all for your insights.
>> I think I will leave off the ledge for comfort, and perhaps work in a
>> better way to hold pencils etc.
>>
>> Now the next challenge will be working out the folding mechanism.
>> Probably not a big deal.
>>
>
> I like the sliding parallel rule. Although I do most all of my drafting
> on the computer, I still like to draft on real velum. At home I use a
> smaller folding table 30x42 with the parallel rule. In my office I have a
> large 43x72 power table with a track drafting machine. Now all it does is
> make a grate layout table for reviewing plans developed in AutoCAD.
>
> The folding table gets little use but I would recommend a good drawing
> board cover. They will also work great when your wife uses it to cut mats
> on.
>
> Dave
>
>
> Posted Via Usenet.com Premium Usenet Newsgroup Services
> ----------------------------------------------------------
> ** SPEED ** RETENTION ** COMPLETION ** ANONYMITY **
> ----------------------------------------------------------
> http://www.usenet.com
In article <[email protected]>,
"TeamCasa" <[email protected]> wrote:
> I still like to draft on real velum.
Me too. I just had my K&E drafting machine rebuilt. You should have
checked this guy out... too cool. A real German engineerey type. Had his
workshop strewn with transits from back in the day they measured the
height of Mount Everest... museum quality stuff. The rebuild cost me
$175.00, and NO off-shore parts..*lol* which was WAY more than the
table/machine combo when I bought it.
But the way that rolls along those linear bearings and locks in place
like a Ft Knox door...it's a treat to use. (I'm AutoCAD trained, 3 years
at a local college, just for fun, not the same).
I like walking past the drawing and looking at it as the day goes
by..making a change here and there...I would never launch CAD just to
scroll around and find this and that detail to tweak and tune...
Most of the stuff is actual size as well...
I agree, Dave... something organic happens.. it's almost as if the brain
has more opportunity to be creative because it is less busy processing
commands and stuff.... it's that 'one-cheek-on-the-stool' thing again.
Thanks. I should probably look into these as I design the table.
SteveP.
<carver3(remove)[email protected]> wrote in message
news:[email protected]...
> On Fri, 30 Dec 2005 03:21:43 GMT, "Highland Pairos"
> <[email protected]> wrote:
>
>>I have been off the group for a few days. Tell me more about a "drawing
>>board cover".
>>
>>SteveP.
>>
> <snip>
>>
>
> Drawing board covers are a multi-layer vinyl material with "self
> healing" qualities - they will recover nicely from compass holes and
> small cuts. However, I would not recommend extensive cutting as this
> will soon damage the cover and the cut marks will affect drawing.
>
> I believe Alvin makes one and you should be able to pick it up at most
> engineering/drafting supply stores (if any still exist). I have been
> doing all of my drafting on a computer for the last 15 years and
> haven't had the occasion to got to a supply store in that time. But
> then again, there's always the internet.
>
> HTH
> Bill
I have looked at hinges that ratchet a numerous angles. I may look at
something like that in order to provide more then one work angle.
SteveP.
"PDQ" <[email protected]> wrote in message
news:yfhrf.5138$%[email protected]...
"CW" <[email protected]> wrote in message
news:[email protected]...
| > Now the next challenge will be working out the folding mechanism.
| > "Highland Pairos" <[email protected]> wrote in message
| > news:[email protected]...
|
I am working on a table that folds down off the wall. The rear of the table
has dowels riding in a dadoe and a pair of staggered legs that fold down at
the front. When it is out of the way only 4" of my shop is lost.
The only thing this drafting newbie has not figured out yet is:
is there a good/better/best angle of inclination at which to work.
--
PDQ
--
On Fri, 30 Dec 2005 03:21:43 GMT, "Highland Pairos"
<[email protected]> wrote:
>I have been off the group for a few days. Tell me more about a "drawing
>board cover".
>
>SteveP.
>
<snip>
>
Drawing board covers are a multi-layer vinyl material with "self
healing" qualities - they will recover nicely from compass holes and
small cuts. However, I would not recommend extensive cutting as this
will soon damage the cover and the cut marks will affect drawing.
I believe Alvin makes one and you should be able to pick it up at most
engineering/drafting supply stores (if any still exist). I have been
doing all of my drafting on a computer for the last 15 years and
haven't had the occasion to got to a supply store in that time. But
then again, there's always the internet.
HTH
Bill
This all makes great sense. Thank you to one and all for your insights. I
think I will leave off the ledge for comfort, and perhaps work in a better
way to hold pencils etc.
Now the next challenge will be working out the folding mechanism. Probably
not a big deal.
Thanks again,
SteveP.
"Highland Pairos" <[email protected]> wrote in message
news:[email protected]...
>I am considering incorporating a drafting table into a set of built in
>bookcases that I am getting ready to make. The first design question that
>popped into my head was an odd one. Is the lip at the bottom of the
>drafting table, the one that the triangles and such rest on, of any
>particular dimension? Does it need to be a particular height above the
>table or a particular thickness?
>
> I have little experience with drafting tables, obviously, but I thought it
> might be nice to have. I just bought my wife a mat cutting system (from
> Lee Valley of course) for Christmas and thought it might be a good work
> surface as well as my using it for drawing plans. My last project really
> taught me the value of drawings of a project.
>
> SteveP.
>
My table had a trough at the bottom edge. It didn't project above the table
surface so was not in the way.
"Highland Pairos" <[email protected]> wrote in message
news:[email protected]...
> This all makes great sense. Thank you to one and all for your insights.
I
> think I will leave off the ledge for comfort, and perhaps work in a better
> way to hold pencils etc.
>
> Now the next challenge will be working out the folding mechanism.
Probably
> not a big deal.
>
> Thanks again,
>
> SteveP.
>
> "Highland Pairos" <[email protected]> wrote in message
> news:[email protected]...
> >I am considering incorporating a drafting table into a set of built in
> >bookcases that I am getting ready to make. The first design question
that
> >popped into my head was an odd one. Is the lip at the bottom of the
> >drafting table, the one that the triangles and such rest on, of any
> >particular dimension? Does it need to be a particular height above the
> >table or a particular thickness?
> >
> > I have little experience with drafting tables, obviously, but I thought
it
> > might be nice to have. I just bought my wife a mat cutting system (from
> > Lee Valley of course) for Christmas and thought it might be a good work
> > surface as well as my using it for drawing plans. My last project
really
> > taught me the value of drawings of a project.
> >
> > SteveP.
> >
>
>
"Chris" <[email protected]> wrote in message
news:[email protected]...
> Highland Pairos wrote:
>> I assumed that it was necessary for setting a triangle 90 deg to a
>> t-square that is set along the edge.
>>
>> Is this not so?
>
> You may be able to set the triangle on the t-square.
Yes, YOU DO SET the triangle on the top edge of the T-square.
>
> I actually preferred the parallel-arm board version, where you had a
> horizontal arm that moved up and down. That way you didn't have to worry
> about keeping the t-square tight against the side.
Once you have been drawing for a while using a T-square you can see if it is
not parallel to the lines on the paper. Really not a problem because you
always hold the t-square in place pulling it up snug against the edge of the
drawing board.
A triangle is set on a T square. The T square is the reference, not any
projection of the table.
"Highland Pairos" <[email protected]> wrote in message
news:[email protected]...
> I assumed that it was necessary for setting a triangle 90 deg to a
t-square
> that is set along the edge.
>
> Is this not so?
>
> SteveP.
>
> "Leon" <[email protected]> wrote in message
> news:[email protected]...
> >
> > "Highland Pairos" <[email protected]> wrote in message
> > news:[email protected]...
> >>I am considering incorporating a drafting table into a set of built in
> >>bookcases that I am getting ready to make. The first design question
that
> >>popped into my head was an odd one. Is the lip at the bottom of the
> >>drafting table, the one that the triangles and such rest on, of any
> >>particular dimension? Does it need to be a particular height above the
> >>table or a particular thickness?
> >
> >
> > LEAVE IT OFF. It is going to be very uncomfortable for you to rest your
> > arms on. My drafting table had a level spot at the top to place the
> > electric eraser, eraser pad, pencil sharpener, etc..
> >
>
>
Leon wrote:
> You know there is something that those of us that used to draw, recognizes
> in other draftsmen. Hand writing. It is still very easy to spot an old
> draftsman by his hand writing. I always get a smile when I start a
> conversation with the question, Do you still draw.
I put myself thru slinging lead.
Spent a lot of time bent over the layout table.
Had a callus on my right hand middle finger from holding those drafting
pencils.
Since printing was the standard on drawings, got to the point where I
forgot how to form script letters because I didn't write anything
anymore, I printed it.
Today, I type.
Time moves on.
Lew
"CW" <[email protected]> wrote in message =
news:[email protected]...
| > Now the next challenge will be working out the folding mechanism.
| > "Highland Pairos" <[email protected]> wrote in message
| > news:[email protected]...
|=20
I am working on a table that folds down off the wall. The rear of the =
table has dowels riding in a dadoe and a pair of staggered legs that =
fold down at the front. When it is out of the way only 4" of my shop is =
lost. =20
The only thing this drafting newbie has not figured out yet is:
is there a good/better/best angle of inclination at which to work.
--=20
PDQ
--