More 'cleaning out the shop' suff.
It's the TT 108 boxed set. Been stored for a long time. Slightest bit of
surface rust on some tools. Only gouges used a couple of times. I Googled
for it but, in most stores it's out of stock. Looks like it retailed around
$200 and street price of around $100.
I'd like to get about $30 + shipping.
email - jimprestoninflorida at yahoo dot com
Also, if anyone has the Delta 12 VS Lathe, I've got 1 3" and 1 6" faceplate,
TS Center, 12" toolrest, pair wrenches, allen wrench and the bar with brass
end to knock the center loose.
jim
Jim:
I tried your email and it was returned (after removing spam protection).
How much do you want for the 6" faceplate? Thanks!
Jim Bailey wrote:
> More 'cleaning out the shop' suff.
>
> It's the TT 108 boxed set. Been stored for a long time. Slightest bit of
> surface rust on some tools. Only gouges used a couple of times. I Googled
> for it but, in most stores it's out of stock. Looks like it retailed around
> $200 and street price of around $100.
>
> I'd like to get about $30 + shipping.
>
> email - jimprestoninflorida at yahoo dot com
>
> Also, if anyone has the Delta 12 VS Lathe, I've got 1 3" and 1 6" faceplate,
> TS Center, 12" toolrest, pair wrenches, allen wrench and the bar with brass
> end to knock the center loose.
>
> jim
>
>
Sorry you had a problem Joeseph - I got two emails quite quickly and all
the stuff is gone - sorry !
jim
"Joseph Connors" <[email protected]> wrote in message
news:[email protected]...
> Jim:
>
> I tried your email and it was returned (after removing spam protection).
> How much do you want for the 6" faceplate? Thanks!
>
>
>
> Jim Bailey wrote:
> > More 'cleaning out the shop' suff.
> >
> > It's the TT 108 boxed set. Been stored for a long time. Slightest bit
of
> > surface rust on some tools. Only gouges used a couple of times. I
Googled
> > for it but, in most stores it's out of stock. Looks like it retailed
around
> > $200 and street price of around $100.
> >
> > I'd like to get about $30 + shipping.
> >
> > email - jimprestoninflorida at yahoo dot com
> >
> > Also, if anyone has the Delta 12 VS Lathe, I've got 1 3" and 1 6"
faceplate,
> > TS Center, 12" toolrest, pair wrenches, allen wrench and the bar with
brass
> > end to knock the center loose.
> >
> > jim
> >
> >