How about grabbing some rectangular pieces of wood, drilling holes
through the four corners of each piece, sticking pipes up through
the corner holes, and then attaching wheels to the bottom of the
pipes. Maybe using some wood glue on the wood to fortify the pipe
entry and exit points, with notches in the pipe for holding the
wood, etc.
The best strong and light shelving material, if not wood?
For storing tools and whatever other household items. Anywhere
between 3 feet and 6 feet tall. I noticed a design is to put two
wheels on one side but not on the other, wheelbarrow style.
I'm not trying to invent something, I'm asking for comments and/or
other ideas. Naturally I want the movable shelves to be sturdy but
light as possible. They will roll on low friction carpet here.
Thanks.
On Nov 23, 12:20 am, John Doe <[email protected]> wrote:
> This is basically what I was thinking about, without wheels.
>
> http://www.amazon.com/Furinno-99557BE-WH-4-Tier-Shelf/dp/B005PO558I/r...
I see several flaws in this idea. First, the shelves have no sides and
no back. If you intend to roll the unit around, the stuff on the
shelves is likely to fall off. Second, and probably more important,
the unit really doesn't look sturdy. Lacking the cross-bracing that a
back and sides would provide, I doubt that it will hold up to the
stress of being moved, especially on carpet. It will likely twist and
"rack" a bit each time, further weakening whatever connects the pipes
to the chipboard shelves.
On Nov 23, 10:08=A0am, John Doe <[email protected]> wrote:
> Greg Guarino <gdguarino gmail.com> wrote:
>
> > John Doe <jdoe usenetlove.invalid> wrote:
> >> This is basically what I was thinking about, without wheels.
>
> http://www.amazon.com/Furinno-99557BE-WH-4-Tier-Shelf/dp/B005PO558I/r...
>
> > I see several flaws in this idea. First, the shelves have no
> > sides and no back. If you intend to roll the unit around, the
> > stuff on the shelves is likely to fall off.
>
> That type of shelving has a multitude of positive reviews from
> people who have actually used them.
I'll take your word for it. Have any of those people added wheels?
>
> > Second, and probably more important, the unit really doesn't
> > look sturdy. Lacking the cross-bracing that a back and sides
> > would provide,
>
> Lots of shelves have no sides and no back.
And they're less sturdy as a result. Which might be OK if they never
move and aren't loaded too heavily.
1
You can always put
> stuff in a box on the shelf, like on so many other shelves. And,
> at least here, I'm not planning on constantly moving the stuff
> around.
>
> > I doubt that it will hold up to the stress of being moved,
> > especially on carpet. It will likely twist and "rack" a bit each
> > time, further weakening whatever connects the pipes to the
> > chipboard shelves.
>
> Or, you could use sturdy pipes and solid & thick joints.
>
> In fact, I was thinking about using a thin shelving surface with
> small blocks of 2 x 4 glued under the corners. That would provide
> about 2 inches of sturdy contact with the pipe at each corner of
> each shelf.
When you say "contact with the pipe", how do you envision building
this exactly? I've been assuming that you mean to use sections of
"pipe" as long as the space between the shelves. But I've reread your
original post, and now I think you intend to use one long pipe in each
corner, to run the full height of the unit. And you intend to "notch"
the pipe in some fashion to enable you to fasten the shelves? How do
you imagine that would work?
> But I'm also thinking about using the wall as a brace, and using
> only two pipes instead of four. Will see.
Perhaps I don't have enough information, and I am not the most
experienced guy here by any means. But what I understand you to mean
sounds like it will be wobbly and unattractive to boot. The 2x4
"blocks" alone should make it as ugly as homemade sin, but worse, I
don't think they'll add much to the strength.
You would be best served buying used Metro Racks with casters. I have
one of those.
i
On 2012-11-22, John Doe <[email protected]> wrote:
> How about grabbing some rectangular pieces of wood, drilling holes
> through the four corners of each piece, sticking pipes up through
> the corner holes, and then attaching wheels to the bottom of the
> pipes. Maybe using some wood glue on the wood to fortify the pipe
> entry and exit points, with notches in the pipe for holding the
> wood, etc.
>
> The best strong and light shelving material, if not wood?
>
> For storing tools and whatever other household items. Anywhere
> between 3 feet and 6 feet tall. I noticed a design is to put two
> wheels on one side but not on the other, wheelbarrow style.
>
> I'm not trying to invent something, I'm asking for comments and/or
> other ideas. Naturally I want the movable shelves to be sturdy but
> light as possible. They will roll on low friction carpet here.
>
> Thanks.
On Friday, November 23, 2012 2:54:27 PM UTC-8, Gunner wrote:
> On Fri, 23 Nov 2012 12:43:33 -0500, "Michael A. Terrell"
>
> <[email protected]> wrote:
> > Gunner's right. They WILL hold 150 pounds per shelf, and sag quite a
> >bit. Try pushing a loaded one around on wheels and it will collapse
> >with a lot less weight.
> Lots of folks forget the difference between Static Load and Dynamic
> load.
True dat. When the wheel goes over a bump, and the '150#' shelf
has a 50# point load at the midpoint, and the shelf takes a permanent bend,
and the expensive item hits the floor...
You want (for wood) a torsion-box for stability, which means
shelves AND A BACK. And for steel, you want large margins of load,
before it's reasonable to add the rumble of little wheels to the problem.
dpb wrote:
>
> On 11/22/2012 11:34 PM, Gunner wrote:
> > On Thu, 22 Nov 2012 23:40:35 +0000 (UTC), John Doe
> > <[email protected]> wrote:
> >
> >> Or maybe something like these Sterilite (plastic) Shelving Units,
> >> with wheels added.
> >>
> >> http://www.amazon.com/Sterilite-4-Shelf-Shelving-Unit-Platinum/dp/B001KYJQMI/ref=pd_bxgy_hg_text_y
> ...
>
> > Great for storing Pampers and other lightweight materials.
> > However....putting heavy stuff on them...disaster
> ...
>
> They're rated at 150-lb/shelf which ain't terrible and have good reviews
> for sturdy from purchasers...look like be worth a chance't on one for a
> trial w/ not much to lose...
Gunner's right. They WILL hold 150 pounds per shelf, and sag quite a
bit. Try pushing a loaded one around on wheels and it will collapse
with a lot less weight. The only way to add wheels would be to put it
on a dolly made of heavy plywood or metal. More expense than the crappy
things are worth. I have a few that hold bulky, light weight boxed
computer parts. I used one to store canned goods for a little while,
and it''s very warped now.
On Fri, 23 Nov 2012 09:27:12 -0600, dpb <[email protected]> wrote:
>On 11/22/2012 11:34 PM, Gunner wrote:
>> On Thu, 22 Nov 2012 23:40:35 +0000 (UTC), John Doe
>> <[email protected]> wrote:
>>
>>> Or maybe something like these Sterilite (plastic) Shelving Units,
>>> with wheels added.
>>>
>>> http://www.amazon.com/Sterilite-4-Shelf-Shelving-Unit-Platinum/dp/B001KYJQMI/ref=pd_bxgy_hg_text_y
>...
>
>> Great for storing Pampers and other lightweight materials.
>> However....putting heavy stuff on them...disaster
>...
>
>They're rated at 150-lb/shelf which ain't terrible and have good reviews
>for sturdy from purchasers...look like be worth a chance't on one for a
>trial w/ not much to lose...
http://www.rapidrack.com/
http://www.gorillarack.com/raptor/rhino-rack-i-75.html
http://www.gorillarack.com/about-us-i-61.html
I thought you wanted shelves to hold heavy stuff.. 150lbs..isnt
squat.
The methodology of the left has always been:
1. Lie
2. Repeat the lie as many times as possible
3. Have as many people repeat the lie as often as possible
4. Eventually, the uninformed believe the lie
5. The lie will then be made into some form oflaw
6. Then everyone must conform to the lie
On Thursday, November 22, 2012 5:31:34 PM UTC-6, John Doe wrote:
> How about grabbing some rectangular pieces of wood, drilling holes=20
>=20
> through the four corners of each piece, sticking pipes up through=20
>=20
> the corner holes, and then attaching wheels to the bottom of the=20
>=20
> pipes. Maybe using some wood glue on the wood to fortify the pipe=20
>=20
> entry and exit points, with notches in the pipe for holding the=20
>=20
> wood, etc.=20
>=20
>=20
>=20
> The best strong and light shelving material, if not wood?=20
>=20
>=20
>=20
> For storing tools and whatever other household items. Anywhere=20
>=20
> between 3 feet and 6 feet tall. I noticed a design is to put two=20
>=20
> wheels on one side but not on the other, wheelbarrow style.=20
>=20
>=20
>=20
> I'm not trying to invent something, I'm asking for comments and/or
>=20
> other ideas. Naturally I want the movable shelves to be sturdy but=20
>=20
> light as possible. They will roll on low friction carpet here.=20
>=20
>=20
>=20
> Thanks.
Sam's club stores sell some pretty simple and strong metal shelving units u=
nder the brand "Gorilla". We have four units in our basement and one in th=
e garage. They are similar to heaver industrial shelving we used in our fa=
ctory. Pin and slot assembly and the only tool needed for assembly is a ha=
mmer. Size is 4' wide x 18" deep x about 7' tall and the last unit we bo=
ught was around $65.
Or maybe something like these Sterilite (plastic) Shelving Units,
with wheels added.
http://www.amazon.com/Sterilite-4-Shelf-Shelving-Unit-Platinum/dp/B001KYJQMI/ref=pd_bxgy_hg_text_y
http://www.amazon.com/Sterilite-5-Shelf-Shelving-Unit-Platinum/dp/B001BMIL66/ref=sr_1_42?ie=UTF8&qid=1353626429&sr=8-42&keywords=shelving+material
Greg Guarino <gdguarino gmail.com> wrote:
> John Doe <jdoe usenetlove.invalid> wrote:
>> This is basically what I was thinking about, without wheels.
http://www.amazon.com/Furinno-99557BE-WH-4-Tier-Shelf/dp/B005PO558I/ref=sr_1_6?ie=UTF8&qid=1353647443&sr=8-6&keywords=shelves
> I see several flaws in this idea. First, the shelves have no
> sides and no back. If you intend to roll the unit around, the
> stuff on the shelves is likely to fall off.
That type of shelving has a multitude of positive reviews from
people who have actually used them.
> Second, and probably more important, the unit really doesn't
> look sturdy. Lacking the cross-bracing that a back and sides
> would provide,
Lots of shelves have no sides and no back. You can always put
stuff in a box on the shelf, like on so many other shelves. And,
at least here, I'm not planning on constantly moving the stuff
around.
> I doubt that it will hold up to the stress of being moved,
> especially on carpet. It will likely twist and "rack" a bit each
> time, further weakening whatever connects the pipes to the
> chipboard shelves.
Or, you could use sturdy pipes and solid & thick joints.
In fact, I was thinking about using a thin shelving surface with
small blocks of 2 x 4 glued under the corners. That would provide
about 2 inches of sturdy contact with the pipe at each corner of
each shelf.
But I'm also thinking about using the wall as a brace, and using
only two pipes instead of four. Will see.
On 11/22/2012 11:34 PM, Gunner wrote:
> On Thu, 22 Nov 2012 23:40:35 +0000 (UTC), John Doe
> <[email protected]> wrote:
>
>> Or maybe something like these Sterilite (plastic) Shelving Units,
>> with wheels added.
>>
>> http://www.amazon.com/Sterilite-4-Shelf-Shelving-Unit-Platinum/dp/B001KYJQMI/ref=pd_bxgy_hg_text_y
...
> Great for storing Pampers and other lightweight materials.
> However....putting heavy stuff on them...disaster
...
They're rated at 150-lb/shelf which ain't terrible and have good reviews
for sturdy from purchasers...look like be worth a chance't on one for a
trial w/ not much to lose...
--
Try reading the original post. Nobody said anything about holding
heavy stuff. Stop spewing your off-topic political garbage in an
improperly formatted signature. And get over yourself.
--
Gunner <gunnerasch gmail.com> wrote:
> Path: eternal-september.org!mx04.eternal-september.org!feeder.eternal-september.org!news.glorb.com!border3.nntp.dca.giganews.com!Xl.tags.giganews.com!border1.nntp.dca.giganews.com!nntp.giganews.com!local2.nntp.dca.giganews.com!news.giganews.com.POSTED!not-for-mail
> NNTP-Posting-Date: Fri, 23 Nov 2012 16:54:26 -0600
> From: Gunner <gunnerasch gmail.com>
> Newsgroups: rec.crafts.metalworking,rec.woodworking
> Subject: Re: Sturdy portable/rollable shelves?
> Date: Fri, 23 Nov 2012 14:54:19 -0800
> Organization: Coyote Engineering
> Reply-To: gunnerNOSPAM gmail.com
> Message-ID: <phvva81g1vgr58jatnvcdm0s5h9llbhdm0 4ax.com>
> References: <k8mckl$vnj$1 dont-email.me> <k8md5j$1s1$1 dont-email.me> <nk2ua85ds4un5sohqh3rptfv8pc8n0b2nt 4ax.com> <k8o4m5$vom$1 speranza.aioe.org> <a92dnWkozqBTKDLNnZ2dnUVZ_sudnZ2d earthlink.com>
> X-Newsreader: Forte Agent 1.93/32.576 English (American)
> MIME-Version: 1.0
> Content-Type: text/plain; charset=us-ascii
> Content-Transfer-Encoding: 7bit
> Lines: 48
> X-Usenet-Provider: http://www.giganews.com
> X-Trace: sv3-1PzS+hKIdOcnFpC2/3RX7xucIYcX2pXtEO2NHvo5sO1h+KulahpFX5dwWnlLjACOrA4dCXY3XH3Rei9!IgLR7klLqNSayelk7qe+cziOBblWnDvlf412wuPmB6HfWSuzAcawKdjbdQhbtbGT6xRiK/SS
> X-Complaints-To: abuse giganews.com
> X-DMCA-Notifications: http://www.giganews.com/info/dmca.html
> X-Abuse-and-DMCA-Info: Please be sure to forward a copy of ALL headers
> X-Abuse-and-DMCA-Info: Otherwise we will be unable to process your complaint properly
> X-Postfilter: 1.3.40
> X-Original-Bytes: 3008
> Xref: mx04.eternal-september.org rec.crafts.metalworking:313959 rec.woodworking:133288
>
> On Fri, 23 Nov 2012 12:43:33 -0500, "Michael A. Terrell"
> <mike.terrell earthlink.net> wrote:
>
>>
>>dpb wrote:
>>>
>>> On 11/22/2012 11:34 PM, Gunner wrote:
>>> > On Thu, 22 Nov 2012 23:40:35 +0000 (UTC), John Doe
>>> > <jdoe usenetlove.invalid> wrote:
>>> >
>>> >> Or maybe something like these Sterilite (plastic) Shelving Units,
>>> >> with wheels added.
>>> >>
>>> >> http://www.amazon.com/Sterilite-4-Shelf-Shelving-Unit-Platinum/dp/B001KYJQMI/ref=pd_bxgy_hg_text_y
>>> ...
>>>
>>> > Great for storing Pampers and other lightweight materials.
>>> > However....putting heavy stuff on them...disaster
>>> ...
>>>
>>> They're rated at 150-lb/shelf which ain't terrible and have good reviews
>>> for sturdy from purchasers...look like be worth a chance't on one for a
>>> trial w/ not much to lose...
>>
>>
>> Gunner's right. They WILL hold 150 pounds per shelf, and sag quite a
>>bit. Try pushing a loaded one around on wheels and it will collapse
>>with a lot less weight. The only way to add wheels would be to put it
>>on a dolly made of heavy plywood or metal. More expense than the crappy
>>things are worth. I have a few that hold bulky, light weight boxed
>>computer parts. I used one to store canned goods for a little while,
>>and it''s very warped now.
>
> Lots of folks forget the difference between Static Load and Dynamic
> load.
>
> And it costs them gear at the worst possible moment
>
> Gunner
>
> The methodology of the left has always been:
>
> 1. Lie
> 2. Repeat the lie as many times as possible
> 3. Have as many people repeat the lie as often as possible
> 4. Eventually, the uninformed believe the lie
> 5. The lie will then be made into some form oflaw
> 6. Then everyone must conform to the lie
>
On 11/25/2012 7:42 PM, RonB wrote:
> On Thursday, November 22, 2012 5:31:34 PM UTC-6, John Doe wrote:
>> How about grabbing some rectangular pieces of wood, drilling holes
>> through the four corners of each piece, sticking pipes up through
>> the corner holes, and then attaching wheels to the bottom of the
>> pipes. Maybe using some wood glue on the wood to fortify the pipe
>> entry and exit points, with notches in the pipe for holding the
>> wood, etc.
>> The best strong and light shelving material, if not wood?
>> For storing tools and whatever other household items. Anywhere
>> between 3 feet and 6 feet tall. I noticed a design is to put two
>> wheels on one side but not on the other, wheelbarrow style.
>> I'm not trying to invent something, I'm asking for comments and/or
>> other ideas. Naturally I want the movable shelves to be sturdy but
>> light as possible. They will roll on low friction carpet here.
>>
>> Thanks.
Lowes has some nice wire shelves in various sizes from $55 to $75 You
can by four wheels for 5/wheel.
I suspect that Home Depot has something similar.
By the time you take the time, buy the wood and 2X2? you will have at
least that much in it.
On Thu, 22 Nov 2012 23:40:35 +0000 (UTC), John Doe
<[email protected]> wrote:
>Or maybe something like these Sterilite (plastic) Shelving Units,
>with wheels added.
>
>http://www.amazon.com/Sterilite-4-Shelf-Shelving-Unit-Platinum/dp/B001KYJQMI/ref=pd_bxgy_hg_text_y
>
>http://www.amazon.com/Sterilite-5-Shelf-Shelving-Unit-Platinum/dp/B001BMIL66/ref=sr_1_42?ie=UTF8&qid=1353626429&sr=8-42&keywords=shelving+material
Great for storing Pampers and other lightweight materials.
However....putting heavy stuff on them...disaster
Google "Gorilla" Shelving
The methodology of the left has always been:
1. Lie
2. Repeat the lie as many times as possible
3. Have as many people repeat the lie as often as possible
4. Eventually, the uninformed believe the lie
5. The lie will then be made into some form oflaw
6. Then everyone must conform to the lie
On Thu, 22 Nov 2012 23:31:33 +0000 (UTC), John Doe
<[email protected]> wrote:
>How about grabbing some rectangular pieces of wood, drilling holes
>through the four corners of each piece, sticking pipes up through
>the corner holes, and then attaching wheels to the bottom of the
>pipes. Maybe using some wood glue on the wood to fortify the pipe
>entry and exit points, with notches in the pipe for holding the
>wood, etc.
>
>The best strong and light shelving material, if not wood?
>
>For storing tools and whatever other household items. Anywhere
>between 3 feet and 6 feet tall. I noticed a design is to put two
>wheels on one side but not on the other, wheelbarrow style.
>
>I'm not trying to invent something, I'm asking for comments and/or
>other ideas. Naturally I want the movable shelves to be sturdy but
>light as possible. They will roll on low friction carpet here.
>
>Thanks.
Thats doable. However..you have to figure out how to keep the shelves
apart. Wood glue wont do it.
And the best strong and light shelving material is steel.
Just a heads up.
The methodology of the left has always been:
1. Lie
2. Repeat the lie as many times as possible
3. Have as many people repeat the lie as often as possible
4. Eventually, the uninformed believe the lie
5. The lie will then be made into some form oflaw
6. Then everyone must conform to the lie
On Fri, 23 Nov 2012 12:43:33 -0500, "Michael A. Terrell"
<[email protected]> wrote:
>
>dpb wrote:
>>
>> On 11/22/2012 11:34 PM, Gunner wrote:
>> > On Thu, 22 Nov 2012 23:40:35 +0000 (UTC), John Doe
>> > <[email protected]> wrote:
>> >
>> >> Or maybe something like these Sterilite (plastic) Shelving Units,
>> >> with wheels added.
>> >>
>> >> http://www.amazon.com/Sterilite-4-Shelf-Shelving-Unit-Platinum/dp/B001KYJQMI/ref=pd_bxgy_hg_text_y
>> ...
>>
>> > Great for storing Pampers and other lightweight materials.
>> > However....putting heavy stuff on them...disaster
>> ...
>>
>> They're rated at 150-lb/shelf which ain't terrible and have good reviews
>> for sturdy from purchasers...look like be worth a chance't on one for a
>> trial w/ not much to lose...
>
>
> Gunner's right. They WILL hold 150 pounds per shelf, and sag quite a
>bit. Try pushing a loaded one around on wheels and it will collapse
>with a lot less weight. The only way to add wheels would be to put it
>on a dolly made of heavy plywood or metal. More expense than the crappy
>things are worth. I have a few that hold bulky, light weight boxed
>computer parts. I used one to store canned goods for a little while,
>and it''s very warped now.
Lots of folks forget the difference between Static Load and Dynamic
load.
And it costs them gear at the worst possible moment
Gunner
The methodology of the left has always been:
1. Lie
2. Repeat the lie as many times as possible
3. Have as many people repeat the lie as often as possible
4. Eventually, the uninformed believe the lie
5. The lie will then be made into some form oflaw
6. Then everyone must conform to the lie
On Sat, 24 Nov 2012 00:34:11 +0000 (UTC), John Doe
<[email protected]> wrote:
>Try reading the original post. Nobody said anything about holding
>heavy stuff. Stop spewing your off-topic political garbage in an
>improperly formatted signature. And get over yourself.
Feel free to police the dingleberries from my ass, jockstrap.
Gunner
The methodology of the left has always been:
1. Lie
2. Repeat the lie as many times as possible
3. Have as many people repeat the lie as often as possible
4. Eventually, the uninformed believe the lie
5. The lie will then be made into some form oflaw
6. Then everyone must conform to the lie