See the threaded adapter in the following photo:
http://www.goantiques.com/scripts/images,id,1936086.html#image2
I can make those here... But I need an example or the specs on the square
taper size, length, etc.
Any known sources for such info?
Regards,
Joe Agro, Jr.
(800) 871-5022 x113
01.908.542.0244
Flagship Site: http://www.Drill-HQ.com
Automatic / Pneumatic Drills: http://www.AutoDrill.com
Multiple Spindle Drills: http://www.Multi-Drill.com
Production Tapping: http://www.Drill-HQ.com/?page_id=226
VIDEOS: http://www.youtube.com/user/AutoDrill
FACEBOOK: http://www.facebook.com/AutoDrill
TWITTER: http://twitter.com/AutoDrill
V8013-R
> Measuring one of my bits:
>
> Taper is 3/8" on the flat at the widest point, 1-1/4" long and tapers
> to 7/32" at the narrowest point. I don't think the exact dimensions
> are critical.
> --
> Jack Novak
> Buffalo, NY - USA
Jack - Perfect! Thank you.
I'll be making some parts shortly and testing.
Much appreciated.
--
Regards,
Joe Agro, Jr.
(800) 871-5022 x113
01.908.542.0244
Flagship Site: http://www.Drill-HQ.com
Automatic / Pneumatic Drills: http://www.AutoDrill.com
Multiple Spindle Drills: http://www.Multi-Drill.com
Production Tapping: http://www.Drill-HQ.com/?page_id=226
VIDEOS: http://www.youtube.com/user/AutoDrill
FACEBOOK: http://www.facebook.com/AutoDrill
TWITTER: http://twitter.com/AutoDrill
V8013-R
On Fri, 16 Dec 2011 08:56:48 -0500, "Joe AutoDrill"
<[email protected]> wrote:
>See the threaded adapter in the following photo:
>
>http://www.goantiques.com/scripts/images,id,1936086.html#image2
>
>I can make those here... But I need an example or the specs on the square
>taper size, length, etc.
>
>Any known sources for such info?
>
>Regards,
>Joe Agro, Jr.
>(800) 871-5022 x113
>01.908.542.0244
>Flagship Site: http://www.Drill-HQ.com
>Automatic / Pneumatic Drills: http://www.AutoDrill.com
>Multiple Spindle Drills: http://www.Multi-Drill.com
>Production Tapping: http://www.Drill-HQ.com/?page_id=226
>VIDEOS: http://www.youtube.com/user/AutoDrill
>FACEBOOK: http://www.facebook.com/AutoDrill
>TWITTER: http://twitter.com/AutoDrill
>
>
>V8013-R
>
>
Measuring one of my bits:
Taper is 3/8" on the flat at the widest point, 1-1/4" long and tapers
to 7/32" at the narrowest point. I don't think the exact dimensions
are critical.
--
Jack Novak
Buffalo, NY - USA
On 12/16/2011 8:56 AM, Joe AutoDrill wrote:
> See the threaded adapter in the following photo:
>
> http://www.goantiques.com/scripts/images,id,1936086.html#image2
>
> I can make those here... But I need an example or the specs on the square
> taper size, length, etc.
Your goal would be to allow people to use more modern bits in a bit
brace? I'm certainly not knowledgeable enough to say, but it doesn't
seem to me that most of the bits we would use with electric drills would
be well suited to a bit brace. I remember using them as a kid
occasionally with my Dad.
You know what could be really handy in a location with no electricity?
Those "push drills", or whatever they were called. Before cordless
tools, those were awfully handy for drilling pilot holes, and for
driving the screws, for that matter.
On 12/16/11 11:53 AM, Greg Guarino wrote:
> You know what could be really handy in a location with no electricity?
> Those "push drills", or whatever they were called.
Yankee screwdriver.
--
-MIKE-
"Playing is not something I do at night, it's my function in life"
--Elvin Jones (1927-2004)
--
http://mikedrums.com
[email protected]
---remove "DOT" ^^^^ to reply
On 12/16/2011 1:08 PM, -MIKE- wrote:
> On 12/16/11 11:53 AM, Greg Guarino wrote:
>> You know what could be really handy in a location with no electricity?
>> Those "push drills", or whatever they were called.
>
>
> Yankee screwdriver.
>
>
My Dad had a few and loved them. A couple of them were all chrome with
special bits that stored in the handle. Small, portable and never need
charging. I may have to dig around and find those, even for my own use.
But working with no power? Those would really be a blessing.