I dropped my Disston D-23 10 tpi crosscut saw at Circle Saw in Houston to be
sharpened. Can you believe their charge is $5.00 for the service?
I asked them how they still did it for that price. Their reply was they
don't do many handsaws any more and the guy can put it on a machine and do
other things while it is working.
From past experience, I know I will have to stone the sides of the teeth,
the saw will stay in it's kerf and will be aggressive in it's cut.
On Dec 13, 5:35=A0pm, Morris Dovey <[email protected]> wrote:
> Well, obviously, our neighbors to the north aren't as skilled at
> managing their economy :-/
Well now, THAT was good for a snicker.
!!
Robert
On Dec 13, 6:35=A0pm, Morris Dovey <[email protected]> wrote:
> [email protected] wrote:
> > On Dec 13, 2:26 pm, Robatoy <[email protected]> wrote:
> > Canadian...whic is, again, about 2 buck US.. <wry
> >> grin>..well, shit, we were at par only a few months ago.
>
> > Still not sure what happened there...
>
> Well, obviously, our neighbors to the north aren't as skilled at
> managing their economy :-/
>
> --
> Morris Dovey
> DeSoto Solar
> DeSoto, Iowa USAhttp://www.iedu.com/DeSoto/
That just means our printing presses ran out of ink before yours did.
...and it's neighbors.. not neighbors.
On Dec 13, 8:56=A0pm, Morris Dovey <[email protected]> wrote:
> Robatoy wrote:
> > On Dec 13, 6:45 pm, "[email protected]" <[email protected]>
> > wrote:
> >> On Dec 13, 5:35 pm, Morris Dovey <[email protected]> wrote:
>
> >>> Well, obviously, our neighbors to the north aren't as skilled at
> >>> managing their economy :-/
> >> Well now, THAT was good for a snicker.
>
> >> =A0 !!
>
> >> Robert
>
> > That Morris cuts deep, eh?
>
> Just trying to maintain our position as the leading producer of big
> irony. :)
>
> --
> Morris Dovey
> DeSoto Solar
> DeSoto, Iowa USAhttp://www.iedu.com/DeSoto/
There are countries on this planet, where they will cut off your hand
for stealing a Snickers bar. Is that ironic?
On Dec 13, 11:29=A0am, "[email protected]" <[email protected]>
wrote:
> On Dec 13, 8:59=A0am, mac davis <[email protected]> wrote:
>
> > I used to take 5 or 6 at a time to the local saw shop and exchange them=
for
> > one's he's sharpened and coated...
> > Then, it was a lot cheaper than buying blades, but with the off shore s=
tuff now,
> > I think I'd just recycle the old blades..
>
> I don't even think anyone here has the capability to sharpen a 7 1/4
> blade.
>
> 3,000 years ago when I was a professhunal carpintar, we used to have
> saw blade cards where we kept our blades. =A0It was a piece of plywood
> with a large sheetrock toggle through a hole on which we piled up the
> blades and tightened down the toggle to secure them.
>
> We all had about 20 blades or so, and kept the plywood and the planer
> blades separated as they could only be sharpened by a file.
>
> When we were busted, we used to file out blades by hand, which wasn't
> hard to do if you didn't wait so long that the blade was really dull.
>
> Talk about burning memories....
>
> When I started framing houses, there was an old crippled up alcoholic
> that used to come out to the subdivisions in a small mail truck. =A0In
> the truck he kept his tiny generator, and a Foley Belsaw blade
> sharpening machine.
>
> He kept no schedule, and actually didn't do a very good job on the
> blades. =A0But he was there and so were we. =A0So he would pull up every
> two weeks or so, if business was bad, once a week. =A0He would gather up
> all our cards, pull off the blades and set one up in the machine.
> After it was running, he would pour himself some of his own
> lubricating fluid and sit there and watch the machine, sharpening
> blade after blade.
>
> If there were several crews around there, or if we hadn't seen him for
> a while he would sit there all day. =A0By the end of the day, he could
> barely tell you what you owed him, and the little truck smelled like a
> smokey old honky tonk.
>
> With the advent of *affordable* carbide blades for circular saws, it
> was the end of sharpening. =A0The carbides cut better, last longer, and
> even cut nails better. =A0Besides, you can get such good deals when they
> are on sale it is silly.
>
> I went in the box about a month ago and they had the Freud 24 tooth
> blades on sale for $10. =A0On closer inspection, there were several two-
> for-one packages in there, so that made them $5 for a really nice
> blade. =A0in the 70's, I was paying $2 to have those old steel blades
> sharpened.
>
> Robert
When I rip long strips of solid surface material, I use a 12' fence
and a Milwaukee Circular Saw. The blades, I buy by the pack. Bosch. 40
teeth. Thin kerf. They don't last long, especially when cutting Staron
(a few % more minerals, which also makes it harder and wear better).
Then they get relegated to skid-cutting duty, where the staples and
nails usually finish them off enough to discard. I pay around $ 10.00
per blade. Canadian...whic is, again, about 2 buck US.. <wry
grin>..well, shit, we were at par only a few months ago.
[email protected] wrote:
> On Dec 13, 2:26 pm, Robatoy <[email protected]> wrote:
> Canadian...whic is, again, about 2 buck US.. <wry
>> grin>..well, shit, we were at par only a few months ago.
>
> Still not sure what happened there...
Well, obviously, our neighbors to the north aren't as skilled at
managing their economy :-/
--
Morris Dovey
DeSoto Solar
DeSoto, Iowa USA
http://www.iedu.com/DeSoto/
Robert Bonomi wrote:
> In article <[email protected]>,
> Morris Dovey <[email protected]> wrote:
>> [email protected] wrote:
>>> On Dec 13, 2:26 pm, Robatoy <[email protected]> wrote:
>>> Canadian...whic is, again, about 2 buck US.. <wry
>>>> grin>..well, shit, we were at par only a few months ago.
>>> Still not sure what happened there...
>> Well, obviously, our neighbors to the north aren't as skilled at
>> managing their economy :-/
>
> No SKIL at it you say? Isn't that Canada BOSCHing?
Methinks not - It does make it more attractive for USAnians (or those of
'em who have anything left) to purchase Canadian products with US$...
--
Morris Dovey
DeSoto Solar
DeSoto, Iowa USA
http://www.iedu.com/DeSoto/
Robatoy wrote:
> On Dec 13, 6:45 pm, "[email protected]" <[email protected]>
> wrote:
>> On Dec 13, 5:35 pm, Morris Dovey <[email protected]> wrote:
>>
>>> Well, obviously, our neighbors to the north aren't as skilled at
>>> managing their economy :-/
>> Well now, THAT was good for a snicker.
>>
>> !!
>>
>> Robert
>
> That Morris cuts deep, eh?
Just trying to maintain our position as the leading producer of big
irony. :)
--
Morris Dovey
DeSoto Solar
DeSoto, Iowa USA
http://www.iedu.com/DeSoto/
On Dec 13, 8:59=A0am, mac davis <[email protected]> wrote:
> I used to take 5 or 6 at a time to the local saw shop and exchange them f=
or
> one's he's sharpened and coated...
> Then, it was a lot cheaper than buying blades, but with the off shore stu=
ff now,
> I think I'd just recycle the old blades..
I don't even think anyone here has the capability to sharpen a 7 1/4
blade.
3,000 years ago when I was a professhunal carpintar, we used to have
saw blade cards where we kept our blades. It was a piece of plywood
with a large sheetrock toggle through a hole on which we piled up the
blades and tightened down the toggle to secure them.
We all had about 20 blades or so, and kept the plywood and the planer
blades separated as they could only be sharpened by a file.
When we were busted, we used to file out blades by hand, which wasn't
hard to do if you didn't wait so long that the blade was really dull.
Talk about burning memories....
When I started framing houses, there was an old crippled up alcoholic
that used to come out to the subdivisions in a small mail truck. In
the truck he kept his tiny generator, and a Foley Belsaw blade
sharpening machine.
He kept no schedule, and actually didn't do a very good job on the
blades. But he was there and so were we. So he would pull up every
two weeks or so, if business was bad, once a week. He would gather up
all our cards, pull off the blades and set one up in the machine.
After it was running, he would pour himself some of his own
lubricating fluid and sit there and watch the machine, sharpening
blade after blade.
If there were several crews around there, or if we hadn't seen him for
a while he would sit there all day. By the end of the day, he could
barely tell you what you owed him, and the little truck smelled like a
smokey old honky tonk.
With the advent of *affordable* carbide blades for circular saws, it
was the end of sharpening. The carbides cut better, last longer, and
even cut nails better. Besides, you can get such good deals when they
are on sale it is silly.
I went in the box about a month ago and they had the Freud 24 tooth
blades on sale for $10. On closer inspection, there were several two-
for-one packages in there, so that made them $5 for a really nice
blade. in the 70's, I was paying $2 to have those old steel blades
sharpened.
Robert
"tom" <[email protected]> wrote in message
news:[email protected]...
> On Dec 12, 5:22 pm, "'lektric dan" <[email protected]> wrote:
>> Does any one get their circular saw blades sharpened any more? My Dad
>> used to take his carbide-toothed blades in regularly to get them
>> "touched up", especially when he needed a really clean cut. My
>> neighbor says it costs more in time and gas, a new blade is cheaper.
>
> For some blades, I think it's worthwhile. I'm always driving right
> past the shop. And for the price of some of these blades, it'd better
> be! Tom
In response to Barry, this is the sixth handsaw they have sharpened, the
other 5 had to be stoned, but after that, they were better than new.
I send my Forrest WWII and my Tenryu to Forrest for sharpening. I used to
get my blades sharpened locally, but I had some blades ruined one time.
Circle saw has sharpened the Tenryu for me and did a good job. They are 20
miles from my house, so it is cheaper to mail the blades to Forrest.
On Dec 13, 8:44=A0pm, Robatoy <[email protected]> wrote:
> On Dec 13, 6:35=A0pm, Morris Dovey <[email protected]> wrote:
>
> > [email protected] wrote:
> > > On Dec 13, 2:26 pm, Robatoy <[email protected]> wrote:
> > > Canadian...whic is, again, about 2 buck US.. <wry
> > >> grin>..well, shit, we were at par only a few months ago.
>
> > > Still not sure what happened there...
>
> > Well, obviously, our neighbors to the north aren't as skilled at
> > managing their economy :-/
>
> > --
> > Morris Dovey
> > DeSoto Solar
> > DeSoto, Iowa USAhttp://www.iedu.com/DeSoto/
>
> That just means our printing presses ran out of ink before yours did.
> ...and it's neighbors.. not neighbors.
how TF did THAT happen.. I'm sure I sent off.. neighboUrs
On Dec 13, 8:05=A0pm, Morris Dovey <[email protected]> wrote:
> Robert Bonomi wrote:
> > In article <[email protected]>,
> > Morris Dovey =A0<[email protected]> wrote:
> >> [email protected] wrote:
> >>> On Dec 13, 2:26 pm, Robatoy <[email protected]> wrote:
> >>> Canadian...whic is, again, about 2 buck US.. <wry
> >>>> grin>..well, shit, we were at par only a few months ago.
> >>> Still not sure what happened there...
> >> Well, obviously, our neighbors to the north aren't as skilled at
> >> managing their economy :-/
>
> > No SKIL at it you say? =A0Isn't that Canada BOSCHing?
>
> Methinks not - It does make it more attractive for USAnians (or those of
> 'em who have anything left) to purchase Canadian products with US$...
>
Yes! Like those really cool Toyotas and Hondas we make up here.
Especially those Lexus RX's
Keep them cards and letters coming folks...and those dollars.
http://www.canadiandriver.com/news/030929-1.htm
On Dec 13, 2:26=A0pm, Robatoy <[email protected]> wrote:
> Then they get relegated to skid-cutting duty, where the staples and
> nails usually finish them off enough to discard. I pay around $ 10.00
> per blade.
Mine go down the food chain as well. They start out doing good work,
then go to the saw that does demo, then the same saw cuts up junk and
crap to fit in the job dumpster or large cleanup bags.
The bottom of the line?
Blades reserved for ridge vent retro fit installation and roof
repair. Nothing like taking a dull blade to old yellow pine trusses,
18 - 20 ga gang nails, deck staples and roofing nails. Some of those
blades are literally missing half their teeth at the end of a retro
installation.
Safe to say I get my $ out of them.
Canadian...whic is, again, about 2 buck US.. <wry
> grin>..well, shit, we were at par only a few months ago.
Still not sure what happened there...
Robert
On Dec 13, 8:02 pm, Robatoy <[email protected]> wrote:
> > That just means our printing presses ran out of ink before yours did.
> > ...and it's neighbors.. not neighbors.
>
> how TF did THAT happen.. I'm sure I sent off.. neighboUrs
Don't give it a second thought. Once the signal crossed airspace, we
autocorrected it for our viewing pleasure.
We only let it go through the second time so you would think no one
was watching.
;^)
Robert
On Dec 13, 6:45=A0pm, "[email protected]" <[email protected]>
wrote:
> On Dec 13, 5:35=A0pm, Morris Dovey <[email protected]> wrote:
>
> > Well, obviously, our neighbors to the north aren't as skilled at
> > managing their economy :-/
>
> Well now, THAT was good for a snicker.
>
> =A0 !!
>
> Robert
That Morris cuts deep, eh?
On Dec 12, 5:22 pm, "'lektric dan" <[email protected]> wrote:
> Does any one get their circular saw blades sharpened any more? My Dad
> used to take his carbide-toothed blades in regularly to get them
> "touched up", especially when he needed a really clean cut. My
> neighbor says it costs more in time and gas, a new blade is cheaper.
For some blades, I think it's worthwhile. I'm always driving right
past the shop. And for the price of some of these blades, it'd better
be! Tom
In article <[email protected]>,
Morris Dovey <[email protected]> wrote:
>[email protected] wrote:
>> On Dec 13, 2:26 pm, Robatoy <[email protected]> wrote:
>
>> Canadian...whic is, again, about 2 buck US.. <wry
>>> grin>..well, shit, we were at par only a few months ago.
>>
>> Still not sure what happened there...
>
>Well, obviously, our neighbors to the north aren't as skilled at
>managing their economy :-/
No SKIL at it you say? Isn't that Canada BOSCHing?
Lowell Holmes wrote:
> I dropped my Disston D-23 10 tpi crosscut saw at Circle Saw in Houston to be
> sharpened. Can you believe their charge is $5.00 for the service?
> I asked them how they still did it for that price. Their reply was they
> don't do many handsaws any more and the guy can put it on a machine and do
> other things while it is working.
> From past experience, I know I will have to stone the sides of the teeth,
> the saw will stay in it's kerf and will be aggressive in it's cut.
>
>
Are they going to do it right, or put it on the machine while they do
something else?
On Fri, 12 Dec 2008 16:22:18 -0800 (PST), "'lektric dan" <[email protected]>
wrote:
>Does any one get their circular saw blades sharpened any more? My Dad
>used to take his carbide-toothed blades in regularly to get them
>"touched up", especially when he needed a really clean cut. My
>neighbor says it costs more in time and gas, a new blade is cheaper.
Wow.. that's a flashback...
I used to take 5 or 6 at a time to the local saw shop and exchange them for
one's he's sharpened and coated...
Then, it was a lot cheaper than buying blades, but with the off shore stuff now,
I think I'd just recycle the old blades..
mac
Please remove splinters before emailing