I've been a Paslode user for years and been very happy with it. I have the
350 Powermaster and love it.
But as soon as possible I'm getting an Impulse (airless) model. The angled
models give a bit better access in tight situations.
I and my work partner have been under a house saving the structure
(replacing joists and beams) and the hoses are
an extreme hassle in that situation.
"John Moorhead" <[email protected]> wrote in message
news:[email protected]...
> Folks -
>
> I am thinking about getting a framing nailer. Do Y'all have any
> recommendations or things to look for - clipped head vs round, stick vs
> coil?
>
> All I have is a brad nailer, so this is a bit more... Don't want to end up
> like that guy with 7 nails in his noggin!
>
> TIA
>
> John Moorhead
>
>
On Sun, 25 Jul 2004 05:00:16 -0700, [email protected] wrote:
>On Sun, 25 Jul 2004 06:08:39 GMT, "John Moorhead"
><[email protected]> wrote:
>
>>Folks -
>>
>>Okay, what about palm nailers? This PC unit sounded interesting...
>>
>>http://www.amazon.com/exec/obidos/tg/detail/-/B00006411G/qid=1090735595/sr=1-1/ref=sr_1_1_etk-tools/104-7084019-9598327?v=glance&s=hi&n=228013
>>
>>Now, I know this'n won't bump and nail, but it might strike a happy balance
>>for this and other uses. Once I finish this job, a standard stick or coil
>>framing nailer would most likely be unemployed, whereas a palm nailer might
>>server other uses..
>>
>>What'cha thinmk?
>>
>>John Moorhead
>>
>
>
>those are pretty much specialty nailers for installing framing clips.
Bostitch dealers, in Canada are giving away 'free' a palm nailer with the
purchase of their framing nailer. $389 CDN for the pair..
Trust me, it's a pretty good deal.
"John Moorhead" <[email protected]> wrote in message
news:[email protected]...
>
>
> Folks -
>
> Okay, what about palm nailers? This PC unit sounded interesting...
I thought about those too - to avoid the expense of a framing nailer, for my
occasional use. From what I learned: (a) they work (b) they're not something
you'd want to use to replace a nailer. Have you hit the pawn shops? Seems
to me like they're in there.
Personally, I "stole" a new FR350 from Sam's club - was at the clearance
table for $75. Just missing the case. I've used it to knock out a project or
three. I like the FR350.
"John Moorhead" <[email protected]> wrote in message news:<[email protected]>...
> Folks -
>
> Okay, what about palm nailers? This PC unit sounded interesting...
A couple of thoughts. First, if you're just curious you might try the
HF model, which is commonly on sale for around $40 (the whole kit).
As a replacement for a framing nailer, my thoughts are that it's an
apples/oranges thing. If you need a framing nailer, the palm nailer
will not satisfy you. I have one, and use it on occasion, and am
grateful for it. But I see it as useful only in tight quarters. I'd
*much* rather have a decent framing hammer than a palm nailer to do
most framing projects.
H.
On Sun, 25 Jul 2004 06:08:39 GMT, "John Moorhead"
<[email protected]> calmly ranted:
>Folks -
>
>Okay, what about palm nailers? This PC unit sounded interesting...
>
>http://www.amazon.com/exec/obidos/tg/detail/-/B00006411G/qid=1090735595/sr=1-1/ref=sr_1_1_etk-tools/104-7084019-9598327?v=glance&s=hi&n=228013
>
>Now, I know this'n won't bump and nail, but it might strike a happy balance
>for this and other uses. Once I finish this job, a standard stick or coil
>framing nailer would most likely be unemployed, whereas a palm nailer might
>server other uses..
>
>What'cha thinmk?
Give this a try to test the waters. It's $20 and should be fully
refundable on Ebay for $35 or so, KWIM,V? ;)
If you like it, keep it or get the PC.
What other uses did you think of for the palm nailer?
- Ever wonder what the speed of lightning would be if it didn't zigzag? -
http://diversify.com Full Service Web Application Programming
On Sun, 25 Jul 2004 06:08:39 GMT, "John Moorhead"
<[email protected]> wrote:
>Folks -
>
>Okay, what about palm nailers? This PC unit sounded interesting...
>
>http://www.amazon.com/exec/obidos/tg/detail/-/B00006411G/qid=1090735595/sr=1-1/ref=sr_1_1_etk-tools/104-7084019-9598327?v=glance&s=hi&n=228013
>
>Now, I know this'n won't bump and nail, but it might strike a happy balance
>for this and other uses. Once I finish this job, a standard stick or coil
>framing nailer would most likely be unemployed, whereas a palm nailer might
>server other uses..
>
>What'cha thinmk?
>
>John Moorhead
>
those are pretty much specialty nailers for installing framing clips.
IMHO, Stick Nails take up less room than Coiled nails themselves. Coiled
nailers take up less room than stick nailers.
Clipped will not hold as well as round because of the smaller head area.
From there, if you are going to use this gun for framing, consider the
Paslode Airless. An associate of mine bought one 3 or 4 years ago and not
having a hose hanging around your feet while on a ladder sold me. He uses
it weekly and together we have probably built 10 or so fences with it. It
has never missed a lick. Fuel canisters run about $12 for 2. That is good
for about 2500 nails. A single battery charge will go about 4000 nails.
I'll take that over lugging any compressor and hose to a job site. It
shoots clipped stick nails.
Folks -
Okay, what about palm nailers? This PC unit sounded interesting...
http://www.amazon.com/exec/obidos/tg/detail/-/B00006411G/qid=1090735595/sr=1-1/ref=sr_1_1_etk-tools/104-7084019-9598327?v=glance&s=hi&n=228013
Now, I know this'n won't bump and nail, but it might strike a happy balance
for this and other uses. Once I finish this job, a standard stick or coil
framing nailer would most likely be unemployed, whereas a palm nailer might
server other uses..
What'cha thinmk?
John Moorhead
Ditto.
<[email protected]> wrote in message
news:[email protected]...
> On Sun, 25 Jul 2004 06:08:39 GMT, "John Moorhead"
> <[email protected]> wrote:
>
> >Folks -
> >
> >Okay, what about palm nailers? This PC unit sounded interesting...
> >
>
>http://www.amazon.com/exec/obidos/tg/detail/-/B00006411G/qid=1090735595/sr=
1-1/ref=sr_1_1_etk-tools/104-7084019-9598327?v=glance&s=hi&n=228013
> >
> >Now, I know this'n won't bump and nail, but it might strike a happy
balance
> >for this and other uses. Once I finish this job, a standard stick or
coil
> >framing nailer would most likely be unemployed, whereas a palm nailer
might
> >server other uses..
> >
> >What'cha thinmk?
> >
> >John Moorhead
> >
>
>
> those are pretty much specialty nailers for installing framing clips.
John if you are not going to need to use a framing nailer, the palm nailer
is a good alternative.
I bought a Senco Palm Nailer from Home Depot for $79.00 last fall. The palm
nailer is definitely better than swinging a hammer but still not as
convenient as a framing nailer.
As Bridger indicated, the palm nailer EXCELS at nailing framing clips. It
really will snug the metal brackets up close to the 2x stock.
I did build my 10x12 storage building with the palm nailer and used Hardi
Plank for the siding. While this was vastly better than swinging a hammer,
I did bend about 1 in 15 nails using the palm nailer while trying to
penetrate the Hardi Panel siding. It worked pretty good for nailing wood to
wood, and again was excellent for nailing the metal joist brackets. IMHO
however, the palm nailer is marginally faster than swinging a hammer when
nailing wood to wood. If time is a factor, the framing nailer will probably
be your best bet.
Really big advantages of the palm nailer are that it is lite weight when
compared to a framing nailer, it gets into tight spots easily, it uses
almost ANY sized nail, and you can buy cheaper bulk nails in the quantity
that you want. Since the nail goes in slowly compared to a framing nailer,
you can usually drive the nail to any depth. This was nice being able to
leave the head of the nail proud of the surface when putting up the siding.
"John Moorhead" <[email protected]> wrote in
news:[email protected]:
> Folks -
>
> I am thinking about getting a framing nailer. Do Y'all have any
> recommendations or things to look for - clipped head vs round, stick
> vs coil?
>
> All I have is a brad nailer, so this is a bit more... Don't want to
> end up like that guy with 7 nails in his noggin!
>
> TIA
>
> John Moorhead
>
>
The Porter Cable FR350 (?) that my neighbor loans me occaisionally for
homeowner projects is easy to use, and easy on my no longer so strong back
& shoulder. Seems exceptionally well made.
One of the younger generation of friends is a one man contractor. Ben got
a good deal on some SENCO gear, used, and has had exceptional service from
those pieces. One neat piece he was using was the palm nailer, which made
hanging Simpson-type hanger a LOT easier and faster. Since I've got some
more floor joist upgrading to do, I may just spring for one of those soon.
The mention of supply for your fasteners is a good one. Check to see what
your favorite local lumberyard carries, and adjust your equipment to fit.
An unplanned drive to the big city can ruin a whole building day and/or
your loving wife's attitude.
Patriarch
"Leon" <[email protected]> wrote in message
news:[email protected]...
>
> "Blake Pollard" <[email protected]> wrote in message
> news:[email protected]...
> > >
> > Not according to my doctor it isn't.
> > More damaging to the nerves in the hand, than swinging a hammer is to
the
> wrist
> > and arm.
> > He said you have to be nuts to use one for more than a few minutes a
day.
> > I asked for studies on the subject but he said it's just common sense.
>
> I suppose that could be so, however my Senco model was very palm friendly
> and it simply felt like I was pushing the nail into the wood. I really
felt
> less shock than that of a hammer hitting the head of a nail.
>
>
I have the Senco as well. It's a well made piece of equipment that excels
on joist hangers, is useful for nailing/homing 20d nails or when using
hardwoods (put a rough oak floor in a small barn - the framing gun couldn't
home the nails), but is slower than a hammer on new work.
On Sun, 25 Jul 2004 15:52:20 GMT, "Leon"
<[email protected]> wrote:
>John if you are not going to need to use a framing nailer, the palm nailer
>is a good alternative.
>I bought a Senco Palm Nailer from Home Depot for $79.00 last fall. The palm
>nailer is definitely better than swinging a hammer but still not as
>convenient as a framing nailer.
>
>As Bridger indicated, the palm nailer EXCELS at nailing framing clips. It
>really will snug the metal brackets up close to the 2x stock.
>
>I did build my 10x12 storage building with the palm nailer and used Hardi
>Plank for the siding. While this was vastly better than swinging a hammer,
>I did bend about 1 in 15 nails using the palm nailer while trying to
>penetrate the Hardi Panel siding. It worked pretty good for nailing wood to
>wood, and again was excellent for nailing the metal joist brackets. IMHO
>however, the palm nailer is marginally faster than swinging a hammer when
>nailing wood to wood. If time is a factor, the framing nailer will probably
>be your best bet.
>
>Really big advantages of the palm nailer are that it is lite weight when
>compared to a framing nailer, it gets into tight spots easily, it uses
>almost ANY sized nail, and you can buy cheaper bulk nails in the quantity
>that you want. Since the nail goes in slowly compared to a framing nailer,
>you can usually drive the nail to any depth. This was nice being able to
>leave the head of the nail proud of the surface when putting up the siding.
>
one more thing... the palm nailers use a lot more air than nail
guns....
"Blake Pollard" <[email protected]> wrote in message
news:[email protected]...
> >
> Not according to my doctor it isn't.
> More damaging to the nerves in the hand, than swinging a hammer is to the
wrist
> and arm.
> He said you have to be nuts to use one for more than a few minutes a day.
> I asked for studies on the subject but he said it's just common sense.
I suppose that could be so, however my Senco model was very palm friendly
and it simply felt like I was pushing the nail into the wood. I really felt
less shock than that of a hammer hitting the head of a nail.
Some locales require round head (Cali?).
I like Bostich' wire collated clipped head when I'm framing walls, etc
onsite, etc. The nails fit in a belt better and take less damage than coils
or paper/plastic collated strips if you sit on them or drop 'em. You do
have to mind the fastener depth with thin sheathing - it's pretty easy to
blast a nailhead 2/3 of the way through 1/2" plywood.
I have a couple Bostich N-80 series stick guns (clipped head). If I was
buying tomorrow, I'd get another or look into a Hitachi stick gun.
Oh, and plastic collated full head nails shower your eyes with plastic
fragments (not nice for overhead work).
Coil guns typically hold more nails (120 vs 90?). This makes them generally
heavier than stick guns. If I did a ton of floor and roof decking I'd
probably get one. The plastic magazines on the Bostich coil guns get
fubar-d on occasion.
If the air is plugged in, treat them like a .45 and you won't be wearing any
nails:)
"John Moorhead" <[email protected]> wrote in message
news:[email protected]...
> Folks -
>
> I am thinking about getting a framing nailer. Do Y'all have any
> recommendations or things to look for - clipped head vs round, stick vs
> coil?
>
> All I have is a brad nailer, so this is a bit more... Don't want to end up
> like that guy with 7 nails in his noggin!
>
> TIA
>
> John Moorhead
>
>
Check your local supplier or borg and find out what type of nails they
carry. Around here I was going for the clipped when to my surprise they only
carry round. Probably code reasons but that was the suggestion to me and it
saved me from buyin the wrong one, well I actually never bought either I
went for the palm nailer.
Rich
"John Moorhead" <[email protected]> wrote in message
news:[email protected]...
> Folks -
>
> I am thinking about getting a framing nailer. Do Y'all have any
> recommendations or things to look for - clipped head vs round, stick vs
> coil?
>
> All I have is a brad nailer, so this is a bit more... Don't want to end up
> like that guy with 7 nails in his noggin!
>
> TIA
>
> John Moorhead
>
>
>
Round, stick.
Prior advice is correct - choose nail availability, then get the
nailer which will drive them. I prefer the 20-22 degree nails.
Look on the end of the box of 3" bright framing nails and copy the
list of nailers which will drive them. Next find the nearest
construction supplier who sells those nails to framing contractors.
(not one of the home centers like Home Depot)
Ask them which nailers are the most popular and are most easily
repaired.
Now you will have a short list to review for cost, weight, ease of
use, etc. Very likely, you will find Paslode, Hitachi, Port-Cable and
Bostich in this group along with others such as Senco, Duofast and
Spotnails.
One feature to ask for is a restrictive fire trigger, either
selectable or as a replacement trigger. The Hitachi NR83A calls it a
single trip trigger. Unless you want to bounce-fire nails, this makes
you pull the trigger for each nail. The nailer is capable of firing 3
nails per second in the literature. I have done doubles.
On Sun, 25 Jul 2004 00:22:51 GMT, "John Moorhead"
<[email protected]> wrote:
>Folks -
>
>I am thinking about getting a framing nailer. Do Y'all have any
>recommendations or things to look for - clipped head vs round, stick vs
>coil?
>
>All I have is a brad nailer, so this is a bit more... Don't want to end up
>like that guy with 7 nails in his noggin!
>
>TIA
>
>John Moorhead
>
Sam's is a great place to shop. I was cruising the tools area and found
they had the Porter Cable 2.5" finish nailer and the sign said $35. I took
it up front and it rang up $180. The manager went over to check the sign,
came back and said I got a great deal on that one.
"patrick conroy" <[email protected]> wrote in message
news:[email protected]...
>
> "John Moorhead" <[email protected]> wrote in message
> news:[email protected]...
> >
> >
> > Folks -
> >
> > Okay, what about palm nailers? This PC unit sounded interesting...
>
> I thought about those too - to avoid the expense of a framing nailer, for
my
> occasional use. From what I learned: (a) they work (b) they're not
something
> you'd want to use to replace a nailer. Have you hit the pawn shops? Seems
> to me like they're in there.
>
> Personally, I "stole" a new FR350 from Sam's club - was at the clearance
> table for $75. Just missing the case. I've used it to knock out a project
or
> three. I like the FR350.
>
>
On Sun, 25 Jul 2004 15:52:20 GMT, "Leon" <[email protected]> wrote:
>John if you are not going to need to use a framing nailer, the palm nailer
>is a good alternative.
>I bought a Senco Palm Nailer from Home Depot for $79.00 last fall. The palm
>nailer is definitely better than swinging a hammer but still not as
>convenient as a framing nailer.
>
Not according to my doctor it isn't.
More damaging to the nerves in the hand, than swinging a hammer is to the wrist
and arm.
He said you have to be nuts to use one for more than a few minutes a day.
I asked for studies on the subject but he said it's just common sense.
>As Bridger indicated, the palm nailer EXCELS at nailing framing clips. It
>really will snug the metal brackets up close to the 2x stock.
>
>I did build my 10x12 storage building with the palm nailer and used Hardi
>Plank for the siding. While this was vastly better than swinging a hammer,
>I did bend about 1 in 15 nails using the palm nailer while trying to
>penetrate the Hardi Panel siding. It worked pretty good for nailing wood to
>wood, and again was excellent for nailing the metal joist brackets. IMHO
>however, the palm nailer is marginally faster than swinging a hammer when
>nailing wood to wood. If time is a factor, the framing nailer will probably
>be your best bet.
>
>Really big advantages of the palm nailer are that it is lite weight when
>compared to a framing nailer, it gets into tight spots easily, it uses
>almost ANY sized nail, and you can buy cheaper bulk nails in the quantity
>that you want. Since the nail goes in slowly compared to a framing nailer,
>you can usually drive the nail to any depth. This was nice being able to
>leave the head of the nail proud of the surface when putting up the siding.
>
On Sun, 25 Jul 2004 16:36:25 GMT, "Leon" <[email protected]> wrote:
>
>"Blake Pollard" <[email protected]> wrote in message
>news:[email protected]...
>> >
>> Not according to my doctor it isn't.
>> More damaging to the nerves in the hand, than swinging a hammer is to the
>wrist
>> and arm.
>> He said you have to be nuts to use one for more than a few minutes a day.
>> I asked for studies on the subject but he said it's just common sense.
>
>I suppose that could be so, however my Senco model was very palm friendly
>and it simply felt like I was pushing the nail into the wood. I really felt
>less shock than that of a hammer hitting the head of a nail.
>
I've never tried the Senco, the Bostitch is pretty jarring.
I trust this doctor though, he was recommended by my union years ago and he
specializes in work related injuries.
He knows his tools, and often asks about stuff like what hammers you use, even
shovels. He's a big fan of those ergonomic handles.
On Sun, 25 Jul 2004 00:22:51 GMT, "John Moorhead"
<[email protected]> wrote:
>Folks -
>
>I am thinking about getting a framing nailer. Do Y'all have any
>recommendations or things to look for - clipped head vs round, stick vs
>coil?
>
>All I have is a brad nailer, so this is a bit more... Don't want to end up
>like that guy with 7 nails in his noggin!
>
>TIA
>
>John Moorhead
>
if you are getting it for real jobsite use it'll be the hitachi to
attach to a hose or the paslode for cordless.
if you're looking for something to use a couple of times a year,
either buy something used or perhaps look at the harbor freight
models...
On Sun, 25 Jul 2004 17:32:50 -0400, "Eric Ryder"
<[email protected]> wrote:
>
>"Leon" <[email protected]> wrote in message
>news:[email protected]...
>>
>> "Blake Pollard" <[email protected]> wrote in message
>> news:[email protected]...
>> > >
>> > Not according to my doctor it isn't.
>> > More damaging to the nerves in the hand, than swinging a hammer is to
>the
>> wrist
>> > and arm.
>> > He said you have to be nuts to use one for more than a few minutes a
>day.
>> > I asked for studies on the subject but he said it's just common sense.
>>
>> I suppose that could be so, however my Senco model was very palm friendly
>> and it simply felt like I was pushing the nail into the wood. I really
>felt
>> less shock than that of a hammer hitting the head of a nail.
>>
>>
>
>I have the Senco as well. It's a well made piece of equipment that excels
>on joist hangers, is useful for nailing/homing 20d nails or when using
>hardwoods (put a rough oak floor in a small barn - the framing gun couldn't
>home the nails), but is slower than a hammer on new work.
>
good for fascia work though, where all of the weight of a stick nailer
wants to pull you off of the roof.