I've never owned one, but I am sure getting the "wants". So I've started
reading the reviews and learning about the brands. It seems that misfiring
is an ailment that affects some of the nailers. If you have any experience,
especially heavy day in-day out type making a living with one of these
devices, I'd appreciate hearing about it.
Bob
Bob Davis wrote:
>
> I've never owned one, but I am sure getting the "wants". So I've started
> reading the reviews and learning about the brands. It seems that misfiring
> is an ailment that affects some of the nailers. If you have any experience,
> especially heavy day in-day out type making a living with one of these
> devices, I'd appreciate hearing about it.
>
> Bob
I have the PC that shoots up to 2". Never had a misfire with it. I'm a
contractor so my use is heavy at times. I really like the way it feels
in my hand, just very comfortable. Someone mentioned that it needs to be
oiled, yeah, like a drop of oil, and that isn't going to effect
anything. Some worry about the 2" nails being too weak, and I did wonder
about it too, but that has not been my experience in use. It's
advertised as shooting from 3/4" thru 2" but it will also shoot the 5/8"
brads.
Would I buy it again? In a heartbeat.
Scott
--
An unkind remark is like a killing frost. No matter how much it warms
up later, the damage remains.
On Fri, 17 Oct 2003 13:26:26 GMT, "Bob Davis"
<[email protected]> wrote:
You can get a real cheap one from Harbor Freight. I believe a 18-gauge
3/8" - 1-3/16" cost $19.99. I bought one almost the same but longer
brads (up to 2" brad) for about $25. I have used it for more than six
mths occasionally and I really have no problems with it.
>I've never owned one, but I am sure getting the "wants". So I've started
>reading the reviews and learning about the brands. It seems that misfiring
>is an ailment that affects some of the nailers. If you have any experience,
>especially heavy day in-day out type making a living with one of these
>devices, I'd appreciate hearing about it.
>
>Bob
>
-----= Posted via Newsfeeds.Com, Uncensored Usenet News =-----
http://www.newsfeeds.com - The #1 Newsgroup Service in the World!
-----== Over 100,000 Newsgroups - 19 Different Servers! =-----
you "feel the need"? If you had a little self control, maybe you could
refrain from being "Big Brother"?? Maybe? Nah, that would never happen
..."self control" isn't in your vocabulary.
Oh, and I almost forgot, BITE ME!
have a nice day!
dave
[email protected] wrote:
> Bay Area Dave <[email protected]> wrote:
>
>>Neither you nor I would be qualified to answer his question,
>
>
> Agreed. You should keep your mouth shut when you don't have anything
> useful to contribute and I won't feel the need to stick up for other
> posters who did answer the question asked.
>
Mine are both Porter Cable - BN125 (18 ga.) and DA250A (15 ga.)
I have two friends from who I can borrow a FN250A (16 ga.)
if necessary.
If you have never owned one, many have recommended some inexpensive HF
models and have been satisfied with the performance at the right price.
"Bob Davis" <[email protected]> wrote in message news:<[email protected]>...
> I've never owned one, but I am sure getting the "wants". So I've started
> reading the reviews and learning about the brands. It seems that misfiring
> is an ailment that affects some of the nailers. If you have any experience,
> especially heavy day in-day out type making a living with one of these
> devices, I'd appreciate hearing about it.
>
> Bob
Hitachi, Senco, Makita, Paslode.
On Fri, 17 Oct 2003 19:31:32 -0400, Scott Brownell
<[email protected]> wrote:
>Bob Davis wrote:
>>
>> I've never owned one, but I am sure getting the "wants". So I've started
>> reading the reviews and learning about the brands. It seems that misfiring
>> is an ailment that affects some of the nailers. If you have any experience,
>> especially heavy day in-day out type making a living with one of these
>> devices, I'd appreciate hearing about it.
>>
>> Bob
>
>I have the PC that shoots up to 2". Never had a misfire with it. I'm a
>contractor so my use is heavy at times. I really like the way it feels
>in my hand, just very comfortable. Someone mentioned that it needs to be
>oiled, yeah, like a drop of oil, and that isn't going to effect
>anything. Some worry about the 2" nails being too weak, and I did wonder
>about it too, but that has not been my experience in use. It's
>advertised as shooting from 3/4" thru 2" but it will also shoot the 5/8"
>brads.
>
>Would I buy it again? In a heartbeat.
>
>Scott
Bay Area Dave <[email protected]> wrote:
> Neither you nor I would be qualified to answer his question,
Agreed. You should keep your mouth shut when you don't have anything
useful to contribute and I won't feel the need to stick up for other
posters who did answer the question asked.
I have a PC BN200A 2" 18 guage brad, a Crapsman 351.713610 18 guage - 2"
brad and a Crapsman 351.713640 1/2" stapler.
The PC is legendary for miss firing, while neither Crapsman has ever
misfired (at least for me. I am pretty sure everyone else has a bad comment
or two).
The PC uses a few brands of nails, but they are a pain to find. The Crapsman
uses both Sears and Paslode products. Paslode refills are available almost
everywhere and are inexpensive.
Both brands have good features, so it is a toss up for me. I just don't like
the miss-firing from the PC.
One thing the PC has over the Crapsman is the jam clearing feature. The
Crapsman makes me take off the front cover plate. It has only jammed once,
while the PC has jammed a few times. (Makes me wonder if that is why they
built in a jam feature, hmm)
wayne
"Bob Davis" <[email protected]> wrote in message
news:[email protected]...
> I've never owned one, but I am sure getting the "wants". So I've started
> reading the reviews and learning about the brands. It seems that
misfiring
> is an ailment that affects some of the nailers. If you have any
experience,
> especially heavy day in-day out type making a living with one of these
> devices, I'd appreciate hearing about it.
>
> Bob
>
>
On 17 Oct 2003, Bay Area Dave spake unto rec.woodworking:
> and another thing...if you are "sticking up" for a poster who advocates
> using HF crap for day in and out use, you are dumber than nails.
>
> dave
>
> [email protected] wrote:
>
>> Bay Area Dave <[email protected]> wrote:
>>
>>>Neither you nor I would be qualified to answer his question,
>>
>>
>> Agreed. You should keep your mouth shut when you don't have anything
>> useful to contribute and I won't feel the need to stick up for other
>> posters who did answer the question asked.
Hey Dave! Make sure to tell us if you plonk him!
do you really think that anyone making their living with a brad nailer
would use a HF one? :) I think the OP MIGHT have been asking about
which QUALITY brand folks prefer...
dave
WD wrote:
> On Fri, 17 Oct 2003 13:26:26 GMT, "Bob Davis"
> <[email protected]> wrote:
>
> You can get a real cheap one from Harbor Freight. I believe a 18-gauge
> 3/8" - 1-3/16" cost $19.99. I bought one almost the same but longer
> brads (up to 2" brad) for about $25. I have used it for more than six
> mths occasionally and I really have no problems with it.
>
>
>>I've never owned one, but I am sure getting the "wants". So I've started
>>reading the reviews and learning about the brands. It seems that misfiring
>>is an ailment that affects some of the nailers. If you have any experience,
>>especially heavy day in-day out type making a living with one of these
>>devices, I'd appreciate hearing about it.
>>
>>Bob
>>
>
>
>
>
> -----= Posted via Newsfeeds.Com, Uncensored Usenet News =-----
> http://www.newsfeeds.com - The #1 Newsgroup Service in the World!
> -----== Over 100,000 Newsgroups - 19 Different Servers! =-----
>do you really think that anyone making their living with a brad nailer
>would use a HF one?
I have the $20 HF brad nailer and it is a piece of crap. It "doubles" every
once in a while, jamming it or shooting a bent brad in the work. I like the
idea of a brad nailer (I wasn't sure I would ever use one when I bought the HF)
but not this one. I asked Santa to give me a real one. Let's see if she was
listening.
boy, talk about "selective quotes"!!! Re-read the OP's full post and
tell if he didn't ask specifically for recommendations from FOLKS
ESPECIALLY WHO USE THE NAILERS TO MAKE A LIVING?? Hello??? Neither you
nor I would be qualified to answer his question, even though I have 3
nailers...
dave
[email protected] wrote:
> Bay Area Dave <[email protected]> wrote:
>
>>do you really think that anyone making their living with a brad nailer
>>would use a HF one? :) I think the OP MIGHT have been asking about
>>which QUALITY brand folks prefer...
>
>
>
> Actually the original poster asked -
>
>>>If you have any experience, ... I'd appreciate hearing about it.
>
>
> He also didn't specify what he would be using it for.
>
> For price performance I don't think the HF "Professional" 2" 18ga
> brad nailer can be beat. Its frequently <$30 on sale and comes with spare
> wear parts. I have one. It hasn't misfired on me yet.
>
>
Bay Area Dave <[email protected]> wrote:
> do you really think that anyone making their living with a brad nailer
> would use a HF one? :) I think the OP MIGHT have been asking about
> which QUALITY brand folks prefer...
Actually the original poster asked -
>> If you have any experience, ... I'd appreciate hearing about it.
He also didn't specify what he would be using it for.
For price performance I don't think the HF "Professional" 2" 18ga
brad nailer can be beat. Its frequently <$30 on sale and comes with spare
wear parts. I have one. It hasn't misfired on me yet.
and another thing...if you are "sticking up" for a poster who advocates
using HF crap for day in and out use, you are dumber than nails.
dave
[email protected] wrote:
> Bay Area Dave <[email protected]> wrote:
>
>>Neither you nor I would be qualified to answer his question,
>
>
> Agreed. You should keep your mouth shut when you don't have anything
> useful to contribute and I won't feel the need to stick up for other
> posters who did answer the question asked.
>
I appreciate all the informative posts.
$150 is not expensive for a good tool that will be around a while and saves
a lot of time. I think I'll go for the Senco - I have not read a single
critical comment about that brand and I like the oil free aspect. The
FP25XP sounds great. I was not aware of that model - its not carried
everywhere, but I think its the one I'll get.
Best regards,
Bob
"ELAhrens" <[email protected]> wrote in message
news:[email protected]...
> I will agree on the Senco but after that I have to say PC. I have no
> experience with Hitachi or Makita nailers.
> I have two PC nailers now, a DA250B 15ga angle finish nailer and a BN125
> 18ga straight brad nailer (never seen a 18 angle). I use both quite a lot
> but I'm planning on getting rid of the 18ga and get a Senco FP25XP 18ga
> finish nailer. One of the problems with the PC as well as most others is
> they keep on firing without nails, also the PC's require a few drops of
oil
> which may cause problems with the wood finish - this has never happened to
> me, however. The Senco FP25XP is oilless and won't fire without brads in
the
> slide. Another advantage of the Senco is the range of length of brads -
> 5/8's to 2-1/8". My PC BN125 is 5/8 to 1-1/4 (The BN200 is 3/4 - 2" and
the
> DA250 is 1 to 2-1/2). The Senco FP25XP ain't cheap though, around $150.
> There are 18 ga brad nailers cheaper - but are they in the long run? My PC
> BN125 was around $80 and while it has done fine, I'm going to switch.
>
> See the Senco FP25XP here http://tinyurl.com/raqi
>
> Good hunting, Erik
>
>
> "Lawrence A. Ramsey" <[email protected]> wrote in message
> news:[email protected]...
> > Senco, Hitachi, Makita, in that order. But it could be changed and it
> > would not hurt my feelings.
> >
> >
> > On Fri, 17 Oct 2003 13:26:26 GMT, "Bob Davis"
> > <[email protected]> wrote:
> >
> > >I've never owned one, but I am sure getting the "wants". So I've
started
> > >reading the reviews and learning about the brands. It seems that
> misfiring
> > >is an ailment that affects some of the nailers. If you have any
> experience,
> > >especially heavy day in-day out type making a living with one of these
> > >devices, I'd appreciate hearing about it.
> > >
> > >Bob
> > >
> >
>
>
Senco, Hitachi, Makita, in that order. But it could be changed and it
would not hurt my feelings.
On Fri, 17 Oct 2003 13:26:26 GMT, "Bob Davis"
<[email protected]> wrote:
>I've never owned one, but I am sure getting the "wants". So I've started
>reading the reviews and learning about the brands. It seems that misfiring
>is an ailment that affects some of the nailers. If you have any experience,
>especially heavy day in-day out type making a living with one of these
>devices, I'd appreciate hearing about it.
>
>Bob
>
I will agree on the Senco but after that I have to say PC. I have no
experience with Hitachi or Makita nailers.
I have two PC nailers now, a DA250B 15ga angle finish nailer and a BN125
18ga straight brad nailer (never seen a 18 angle). I use both quite a lot
but I'm planning on getting rid of the 18ga and get a Senco FP25XP 18ga
finish nailer. One of the problems with the PC as well as most others is
they keep on firing without nails, also the PC's require a few drops of oil
which may cause problems with the wood finish - this has never happened to
me, however. The Senco FP25XP is oilless and won't fire without brads in the
slide. Another advantage of the Senco is the range of length of brads -
5/8's to 2-1/8". My PC BN125 is 5/8 to 1-1/4 (The BN200 is 3/4 - 2" and the
DA250 is 1 to 2-1/2). The Senco FP25XP ain't cheap though, around $150.
There are 18 ga brad nailers cheaper - but are they in the long run? My PC
BN125 was around $80 and while it has done fine, I'm going to switch.
See the Senco FP25XP here http://tinyurl.com/raqi
Good hunting, Erik
"Lawrence A. Ramsey" <[email protected]> wrote in message
news:[email protected]...
> Senco, Hitachi, Makita, in that order. But it could be changed and it
> would not hurt my feelings.
>
>
> On Fri, 17 Oct 2003 13:26:26 GMT, "Bob Davis"
> <[email protected]> wrote:
>
> >I've never owned one, but I am sure getting the "wants". So I've started
> >reading the reviews and learning about the brands. It seems that
misfiring
> >is an ailment that affects some of the nailers. If you have any
experience,
> >especially heavy day in-day out type making a living with one of these
> >devices, I'd appreciate hearing about it.
> >
> >Bob
> >
>