"rhiannon" <[email protected]> wrote in message
news:[email protected]...
> 5. cheese grater
>
It does look like one, but it's not a cheese grater.
R.H. wrote:
> Just posted a few more photos, and some answers to the last set:
> http://puzzlephotos.blogspot.com/
>
>
> Rob
>
207> Some kind of insert to be pressed into wood. A bearing maybe?
208. Strip of staples
213. A feather.
214. Hook designed to be embedded in concrete.
217. Mil-spec vehicle battery terminal puller <G>
Jeff
--
Jeffry Wisnia
(W1BSV + Brass Rat '57 EE)
"As long as there are final exams, there will be prayer in public
schools"
"Leo Lichtman" <[email protected]> wrote in message
news:[email protected]...
> Ned Simmons wrote: How about if a chain breaker was required to assemble
> and disassemble the chain breaker?
> ^^^^^^^^^^^^^
> It would be called a chain breaker breaker.
This is getting deep...
"Leo Lichtman" <[email protected]> wrote in message
news:[email protected]...
> 215 is a valve stem cover for an old car tire. The "tit" is for
> inserting/removing the valve core.
Correct
> 217 is a tool for breaking and splicing roller chain. It is used to press
> the pins out and back in.
Correct again, it's a chainbreaker
"Lane" <lane_nospam@copperaccents_dot_com> wrote in message
news:[email protected]...
> >>If anyone is interested, I added another set of photos, two of which
> >>you might have already seen on my other site:
> >>http://microphotos.blogspot.com/
> >>
> >>
>
> #6 is one side of Velcro
This answer is correct.
"Dave" <[email protected]> wrote in message
news:[email protected]...
>
>
> "R.H." wrote:
> >
> > Just posted a few more photos, and some answers to the last set:
> > http://puzzlephotos.blogspot.com/
> >
> > Rob
>
>
> # 213 is an example of Echinarachnius
>
> I.E. a sand dollar
This answer is correct. It's a snapshot made with a 30x digital microscope
that I bought last week, if anyone is interested there are a few more photos
that I took with it here:
http://microphotos.blogspot.com/
"Shirley Bolman" <[email protected]> wrote in message
news:[email protected]...
> 9. Micro text on security document like a check.
Correct, it's the signature line on a check, the letters MP next to the line
stand for microprint
"Jeff Wisnia" <[email protected]> wrote in message
news:[email protected]...
> R.H. wrote:
>
> > If anyone is interested, I added another set of photos, two of which
> > you might have already seen on my other site:
> > http://microphotos.blogspot.com/
> >
>
> 5, Wood rasp?
Correct. On Friday I'm planning to post more tool photos, but I'll be
posting them under the heading "What is it?" instead of the usual "Another
tool ID needed" title.
In article <0a7ud.1063887$Gx4.836478@bgtnsc04-
news.ops.worldnet.att.net>, [email protected] says...
> 217 is a tool for breaking and splicing roller chain. It is used to press
> the pins out and back in.
>
Does the fact that a chain breaker is made from chain links qualify as a
sort of recursion? How about if a chain breaker was required to assemble
and disassemble the chain breaker?
Doug?
Ned Simmons
5. cheese grater
"R.H." <[email protected]> wrote in message
news:[email protected]...
> If anyone is interested, I added another set of photos, two of which
> you might have already seen on my other site:
> http://microphotos.blogspot.com/
>
"Jeff Wisnia" <[email protected]> wrote in message
news:[email protected]...
> R.H. wrote:
> > Just posted a few more photos, and some answers to the last set:
> > http://puzzlephotos.blogspot.com/
> >
> >
> > Rob
> >
>
> 207> Some kind of insert to be pressed into wood. A bearing maybe?
Yes, it's an insert nut but it's not a bearing. The other end of the inside
is threaded, it's for assembling furniture.
> 208. Strip of staples
Correct.
>
> 213. A feather.
Nope
>
> 214. Hook designed to be embedded in concrete.
This wasn't made to be used with concrete
>
> 217. Mil-spec vehicle battery terminal puller <G>
This isn't a battery term. puller.
>
> Jeff
>
> --
> Jeffry Wisnia
>
> (W1BSV + Brass Rat '57 EE)
>
> "As long as there are final exams, there will be prayer in public
> schools"
1. Vegetable slicer? Corrugated fastener?
2. Light bulb filament.
3. ?
4. Glass cutter.
Art
"R.H." <[email protected]> wrote in message
news:[email protected]...
>
> "Dave" <[email protected]> wrote in message
> news:[email protected]...
> >
> >
> > "R.H." wrote:
> > >
> > > Just posted a few more photos, and some answers to the last set:
> > > http://puzzlephotos.blogspot.com/
> > >
> > > Rob
> >
> >
> > # 213 is an example of Echinarachnius
> >
> > I.E. a sand dollar
>
>
> This answer is correct. It's a snapshot made with a 30x digital microscope
> that I bought last week, if anyone is interested there are a few more photos
> that I took with it here:
>
> http://microphotos.blogspot.com/
>
>
"Scott Lurndal" <[email protected]> wrote in message
news:[email protected]...
> [email protected] (DoN. Nichols) writes:
> >In article <[email protected]>,
> >R.H. <[email protected]> wrote:
> >>
> >>"Dave" <[email protected]> wrote in message
> >>news:[email protected]...
> >
> > [ ... ]
> >
> >>> # 213 is an example of Echinarachnius
> >>>
> >>> I.E. a sand dollar
> >>
> >>
> >>This answer is correct. It's a snapshot made with a 30x digital
microscope
> >>that I bought last week, if anyone is interested there are a few more
photos
> >>that I took with it here:
> >>
> >>http://microphotos.blogspot.com/
> >
> >
> > O.K. I'll have a try at some of these:
> >
> >1) Perhaps a thread chaser? Or part of a tap (the same thing in
> > reverse.)
>
> Or the serrated edge of a knife?
This answer is correct.
>
>
> >3) Glue and sand -- maybe?
>
> Garnet sandpaper?
Exactly, 60 grade.
[email protected] (DoN. Nichols) writes:
>In article <[email protected]>,
>R.H. <[email protected]> wrote:
>>
>>"Dave" <[email protected]> wrote in message
>>news:[email protected]...
>
> [ ... ]
>
>>> # 213 is an example of Echinarachnius
>>>
>>> I.E. a sand dollar
>>
>>
>>This answer is correct. It's a snapshot made with a 30x digital microscope
>>that I bought last week, if anyone is interested there are a few more photos
>>that I took with it here:
>>
>>http://microphotos.blogspot.com/
>
>
> O.K. I'll have a try at some of these:
>
>1) Perhaps a thread chaser? Or part of a tap (the same thing in
> reverse.)
Or the serrated edge of a knife?
>3) Glue and sand -- maybe?
Garnet sandpaper?
scott
In article <[email protected]>,
R.H. <[email protected]> wrote:
>
>"Dave" <[email protected]> wrote in message
>news:[email protected]...
[ ... ]
>> # 213 is an example of Echinarachnius
>>
>> I.E. a sand dollar
>
>
>This answer is correct. It's a snapshot made with a 30x digital microscope
>that I bought last week, if anyone is interested there are a few more photos
>that I took with it here:
>
>http://microphotos.blogspot.com/
O.K. I'll have a try at some of these:
1) Perhaps a thread chaser? Or part of a tap (the same thing in
reverse.)
2) Filament from an incandescent lamp. Depending on the scale, it
could be from an auto lamp, or a household light bulb.
3) Glue and sand -- maybe?
4) Roller style glass cutter.
I feel pretty sure about (2) and (4). Moderately so about (1),
and not at all sure about (3).
Enjoy,
DoN.
--
Email: <[email protected]> | Voice (all times): (703) 938-4564
(too) near Washington D.C. | http://www.d-and-d.com/dnichols/DoN.html
--- Black Holes are where God is dividing by zero ---
"Wood Butcher" <[email protected]> wrote in message
news:RInud.740330$8_6.273526@attbi_s04...
> 1. Vegetable slicer? Corrugated fastener?
Slicer is close to being right.
> 2. Light bulb filament.
Correct.
> 3. ?
> 4. Glass cutter.
Yes
>
> Art
>
> "R.H." <[email protected]> wrote in message
> news:[email protected]...
> >
> > "Dave" <[email protected]> wrote in message
> > news:[email protected]...
> > >
> > >
> > > "R.H." wrote:
> > > >
> > > > Just posted a few more photos, and some answers to the last set:
> > > > http://puzzlephotos.blogspot.com/
> > > >
> > > > Rob
> > >
> > >
> > > # 213 is an example of Echinarachnius
> > >
> > > I.E. a sand dollar
> >
> >
> > This answer is correct. It's a snapshot made with a 30x digital
microscope
> > that I bought last week, if anyone is interested there are a few more
photos
> > that I took with it here:
> >
> > http://microphotos.blogspot.com/
> >
> >
>
>
"DoN. Nichols" <[email protected]> wrote in message
news:[email protected]...
> In article <[email protected]>,
> R.H. <[email protected]> wrote:
> >
> >"Dave" <[email protected]> wrote in message
> >news:[email protected]...
>
> [ ... ]
>
> >> # 213 is an example of Echinarachnius
> >>
> >> I.E. a sand dollar
> >
> >
> >This answer is correct. It's a snapshot made with a 30x digital
microscope
> >that I bought last week, if anyone is interested there are a few more
photos
> >that I took with it here:
> >
> >http://microphotos.blogspot.com/
>
>
> O.K. I'll have a try at some of these:
>
> 1) Perhaps a thread chaser? Or part of a tap (the same thing in
> reverse.)
Neither of these
>
> 2) Filament from an incandescent lamp. Depending on the scale, it
> could be from an auto lamp, or a household light bulb.
Household light bulb filament is correct
>
> 3) Glue and sand -- maybe?
Yes
>
> 4) Roller style glass cutter.
Right