I discovered a 1 1/2" Street Elbow - - a 90º copper elbow that has only one
opening expanded - -works well with the very effective vacuum hood for the
K3 Master Pocket Hole System. The expanded end almost fits the hood, and I
figured I could improve that with a little sanding, and taper the smaller
end to fit the hose. The elbow makes the vacuum connection more direct and
eliminates the tendency for the hose to pop off the snap-in hood.
On Dec 22, 12:15=A0pm, "Leon" <[email protected]> wrote:
> "Chuck Olson" <[email protected]> wrote in message
>
> news:[email protected]...
>
> >I discovered a 1 1/2" Street Elbow - - a 90=BA copper elbow that has onl=
y one
> >opening expanded - -works well with the very effective vacuum hood for t=
he
> >K3 Master Pocket Hole System. The expanded end almost fits the hood, and=
I
> >figured I could improve that with a little sanding, and taper the smalle=
r
> >end to fit the hose. The elbow makes the vacuum connection more direct a=
nd
> >eliminates the tendency for the hose to pop off the snap-in hood.
>
> I ended up using a Fein rubber vac adapter, slightly tapered on one end i=
t
> hooks up perfectly to my Festool vac and Kreg Jig. =A0About $4 IIRC.
Ditto.
"Chuck Olson" <[email protected]> wrote in message
news:[email protected]...
>I discovered a 1 1/2" Street Elbow - - a 90º copper elbow that has only one
>opening expanded - -works well with the very effective vacuum hood for the
>K3 Master Pocket Hole System. The expanded end almost fits the hood, and I
>figured I could improve that with a little sanding, and taper the smaller
>end to fit the hose. The elbow makes the vacuum connection more direct and
>eliminates the tendency for the hose to pop off the snap-in hood.
>
I ended up using a Fein rubber vac adapter, slightly tapered on one end it
hooks up perfectly to my Festool vac and Kreg Jig. About $4 IIRC.