Does anyone know anything about the Sunhill SM-150 jointer?
[http://www.sunhillmachinery.com/SM-150%20Jointer.htm] I'm getting
ready to buy a 6" jointer and I like the Delta X5 and the Yorkcraft.
But this Sunhill would seem to be my best bet -- it's got an extra long
56 inch table and is offered at $450 including shipping. People on this
group seem to be happy with Sunhill jointers and I've read some good
reviews in the woodworking magazines, but haven't seen this particular
model mentioned anywhere. I was a little surprised that it is 40 lbs
lighter than the Yorkcraft despite a 10-inch longer table.
Thanks,
Nate
NateDogg wrote:
> Does anyone know anything about the Sunhill SM-150 jointer?
> [http://www.sunhillmachinery.com/SM-150%20Jointer.htm] I'm getting
> ready to buy a 6" jointer and I like the Delta X5 and the Yorkcraft.
> But this Sunhill would seem to be my best bet -- it's got an extra long
> 56 inch table and is offered at $450 including shipping. People on this
> group seem to be happy with Sunhill jointers and I've read some good
> reviews in the woodworking magazines, but haven't seen this particular
> model mentioned anywhere. I was a little surprised that it is 40 lbs
> lighter than the Yorkcraft despite a 10-inch longer table.
I can't comment on the quality, but I just got an email advertising the
8" x 65 " Long Bed Jointer Model SM-204 for $579.
JP
NateDogg wrote:
> Does anyone know anything about the Sunhill SM-150 jointer?
> [http://www.sunhillmachinery.com/SM-150%20Jointer.htm] I'm getting
> ready to buy a 6" jointer and I like the Delta X5 and the Yorkcraft.
> But this Sunhill would seem to be my best bet -- it's got an extra long
> 56 inch table and is offered at $450 including shipping. People on this
> group seem to be happy with Sunhill jointers and I've read some good
> reviews in the woodworking magazines, but haven't seen this particular
> model mentioned anywhere. I was a little surprised that it is 40 lbs
> lighter than the Yorkcraft despite a 10-inch longer table.
I can't comment on the quality, but I just got an email advertising the
8" x 65 " Long Bed Jointer Model SM-204 for $579.
JP
NateDogg wrote:
> Does anyone know anything about the Sunhill SM-150 jointer?
> [http://www.sunhillmachinery.com/SM-150%20Jointer.htm] I'm getting
> ready to buy a 6" jointer and I like the Delta X5 and the Yorkcraft.
> But this Sunhill would seem to be my best bet -- it's got an extra long
> 56 inch table and is offered at $450 including shipping. People on this
> group seem to be happy with Sunhill jointers and I've read some good
> reviews in the woodworking magazines, but haven't seen this particular
> model mentioned anywhere. I was a little surprised that it is 40 lbs
> lighter than the Yorkcraft despite a 10-inch longer table.
I can't comment on the quality, but I just got an email advertising the
8" x 65 " Long Bed Jointer Model SM-204 for $579.
JP
On Sat, 07 Jan 2006 18:58:49 -0500, NateDogg <[email protected]>
wrote:
>Does anyone know anything about the Sunhill SM-150 jointer?
Isn't this the same generic 6" jointer that everyone and their dog has?
(Mine's an Axminster).
The tables are plenty long enough as a jointer, unless you're using it
as a sawmill for initial preparation of huge stock (which it isn't wide
enough for anyway). Basic construction is good and table sag isn't an
issue.
The lever adjust has much less backlash than handwheels and a
cross-screw.
The fence angle adjust is flimsy and wobbly. Works OK, but don't lean on
it.
"NateDogg" <[email protected]> wrote in message
news:[email protected]...
> Does anyone know anything about the Sunhill SM-150 jointer?
> [http://www.sunhillmachinery.com/SM-150%20Jointer.htm] I'm getting ready
> to buy a 6" jointer and I like the Delta X5 and the Yorkcraft. But this
> Sunhill would seem to be my best bet -- it's got an extra long 56 inch
> table and is offered at $450 including shipping. People on this group
> seem to be happy with Sunhill jointers and I've read some good reviews in
> the woodworking magazines, but haven't seen this particular model
> mentioned anywhere. I was a little surprised that it is 40 lbs lighter
> than the Yorkcraft despite a 10-inch longer table.
Not speaking of the brand but more of the size. This is going to be good
for short boards. IMHO if you intend to do 8' boards you are going to need
a longer bed.
56" is not really "extra long"
"NateDogg" <[email protected]> wrote in message
news:[email protected]...
> Does anyone know anything about the Sunhill SM-150 jointer?
> [http://www.sunhillmachinery.com/SM-150%20Jointer.htm] I'm getting ready
> to buy a 6" jointer and I like the Delta X5 and the Yorkcraft. But this
> Sunhill would seem to be my best bet -- it's got an extra long 56 inch
> table and is offered at $450 including shipping. People on this group
> seem to be happy with Sunhill jointers and I've read some good reviews in
> the woodworking magazines, but haven't seen this particular model
> mentioned anywhere. I was a little surprised that it is 40 lbs lighter
> than the Yorkcraft despite a 10-inch longer table.
>
> Thanks,
> Nate
I've got one (and it's for sale, locally, ABQ NM) that has worked well for
me.
Was pretty simple to assemble and it does a good job. I've broken down and
bought
an 8" jointer so this one will have to go. Certainly not selling it due to
performance.
Cheers,
cc