Jointer Pal

If you do a search there is a way to set the blades with masking tape and a
ruler. IIRC the making tape is used for indexing references on the table
and the ruler is set on each end of the knives. The knives rotate and touch
the ruler and push it a short distance. When all knives push the ruler an
equal distance they are all the same height.



<someone@somewhere.org> wrote in message
news:7ZBxd.8148$jn.884@lakeread06...
> I'm going to order a G0500 before the end of the year. The supplied knife
> setting jig
> has gotten mixed reviews, so I thought I'd order a Jointer Pal at the same
> time.
>
> I see the G1753 steel body Jointer Pal for $43 and the G3360 polycarbonate
> body Jointer Pal for $27. It seems to me that the polycarbonate one is
> not
> only $16 cheaper, but also less likely to nick the knifes if screw up
> while
> making adjustments.
>
> What am I missing?
>

I use a dial indicator and a magnetic base... more consistant results than a
magnetic setting jig.
Tom
<someone@somewhere.org> wrote in message
news:7ZBxd.8148$jn.884@lakeread06...
> I'm going to order a G0500 before the end of the year. The supplied knife
> setting jig
> has gotten mixed reviews, so I thought I'd order a Jointer Pal at the same
> time.
>
> I see the G1753 steel body Jointer Pal for $43 and the G3360 polycarbonate
> body Jointer Pal for $27. It seems to me that the polycarbonate one is
> not
> only $16 cheaper, but also less likely to nick the knifes if screw up
> while
> making adjustments.
>
> What am I missing?
>

I bought the poly. version and it worked ok. Have not seen the metal version
but perhaps the index lines are easier to see.

<someone@somewhere.org> wrote in message
news:7ZBxd.8148$jn.884@lakeread06...
> I'm going to order a G0500 before the end of the year. The supplied knife
setting jig
> has gotten mixed reviews, so I thought I'd order a Jointer Pal at the same
time.
>
> I see the G1753 steel body Jointer Pal for $43 and the G3360 polycarbonate
> body Jointer Pal for $27. It seems to me that the polycarbonate one is
not
> only $16 cheaper, but also less likely to nick the knifes if screw up
while
> making adjustments.
>
> What am I missing?
>

On Mon, 20 Dec 2004 15:12:03 GMT, someone@somewhere.org wrote:

>I'm going to order a G0500 before the end of the year. The supplied knife setting jig
>has gotten mixed reviews, so I thought I'd order a Jointer Pal at the same time.
>
>I see the G1753 steel body Jointer Pal for $43 and the G3360 polycarbonate
>body Jointer Pal for $27. It seems to me that the polycarbonate one is not
>only $16 cheaper, but also less likely to nick the knifes if screw up while
>making adjustments.
>
>What am I missing?


I have one. pretty much never use it. straight edge is easier.