Does anyone have the plans handy for the Norm style router table?
BillB wrote:
> Patriarch wrote:
> > [email protected] wrote in news:1165190264.856881.197520
> > @l12g2000cwl.googlegroups.com:
> >
> >> Title says it all. I just bought a new router and now want a table.
> >> Not one of the short standing ones that u need to put on top of
> >> something to use. My dad has a craftsman table that is about 4' tall
> >> but he said he doesn't think they are available anymore. Does anyone
> >> know of a different brand?
> >>
> >>
> >
> > Rockler. Woodcraft. Amazon. Build your own.
>
> Bosch makes a real nice table, with a stand (optional). Boxed mine in
> and store routers in it. Pricey, could build a Norm style router
> station for less, but I needed it now.
Thanks Morris. That is a really nice router table but its a little
more than I want to spend.
Morris Dovey wrote:
> [email protected] (in
> [email protected]) said:
>
> | Title says it all. I just bought a new router and now want a
> | table. Not one of the short standing ones that u need to put on top
> | of something to use. My dad has a craftsman table that is about 4'
> | tall but he said he doesn't think they are available anymore. Does
> | anyone know of a different brand?
>
> I bought a Jessem table and added a Router-Lift; and haven't been
> unhappy with the combination.
>
> If I were starting from scratch and didn't want to take the time to
> build my own I think I'd give serious consideration to one of the
> tables at:
>
> http://www.rt1000.com
>
> (I have no connection with them at all.)
>
> --
> Morris Dovey
> DeSoto Solar
> DeSoto, Iowa USA
> http://www.iedu.com/DeSoto
Hey Mike I would like to see some pics when u get a chance. Thanks
alot
Michael White wrote:
> [email protected] wrote:
>
> > Title says it all. I just bought a new router and now want a table.
> > Not one of the short standing ones that u need to put on top of
> > something to use. My dad has a craftsman table that is about 4' tall
> > but he said he doesn't think they are available anymore. Does anyone
> > know of a different brand?
>
> I bought the Bosch router table, then built a stand to put it in. The stand
> cost me less to build than the Bosch stand, as I used a lot of spare lumber
> I had lying around. The stand is an enclosed cabinet (i.e. thee sides and
> a pair of doors on the fourth) on locking casters with two shelves. One
> shelf in the cabinet is just the perfect size to hold the case the router
> set came in (purely accidental - gotta love it when it works out though :).
> I use the other shelf for bits and various other router tools, including
> small screws and springs. I put ledges on the shelves so nothing rolls
> off.
>
> Took me a lazy day to do - no glue, just 2x4s screwed together for the
> frame, 1/4" plywood for the sides, and 3/4" plywood for the shelves and
> top.
>
> The Bosch stand is just a bare table with a single shelf. The shelf is
> useless for about anything except holding the case for the router.
> Anything small or light will fall off.
>
> I can send you photos of it if you like.
> --
> Michael White "To protect people from the effects of folly is to
> fill the world with fools." -Herbert Spencer
This is similar to what I did. I found some a counter shop with some
Corian they didn't mind selling me, and I built my own tabletop with it
and some 3/4" plywood. I then build a stand for the top from a few 2x4
studs, and it stands around 3.5-4' tall. It's pretty nice not being
forced to bend down over my router when I'm pushing a bunch of wood
through it.
I even built myself a fence. It was surprisingly easy to do.
I need to address the whole dust problem, but I'm thinking a simple box
will take care of that.
B A R R Y wrote:
> [email protected] wrote:
> > Does anyone
> > know of a different brand?
>
> Yours!
>
> This is a _GREAT_ opportunity to make something. You can even make it
> at exactly your preferred height.
>
> For a basic model, all you need is maybe one sheet of 3/4" MDF, some
> scrap hardwood, and some laminate, all available at any Borg.
>
> For the top, laminate two sheets of 3/4" MDF, attach 3/4 x 1 1/2"
> hardwood trim all around, and laminate both sides with plastic laminate.
> Buy an "insert" that fits your router and install it per the
> manufacturer's instructions.
>
> A fence can be as simple as a jointed piece of stock, an elaborate
> shopmade version from one of the 400 "Ultimate Router Table" magazine
> articles, or purchased.
>
> The cabinet is a box! You can go crazy with beautifully dovetailed
> drawers and frame and panel sides, or stay with a simple MDF or plywood
> box with a single access door. Make or buy a "remote switch", and
> you're good to go. Remote switches are easily made with a single box,
> one of those duplex switches that is a switch and single outlet, and an
> extension cord.
>
> Don't like the height? Make different cabinet box. Don't like the
> table? Think out your likes and dislikes, and reuse the insert and
> fence on your next one.
>
> Take a look at the Bench Dog tables at a local tool store. You can do
> it, there is no wrong answer. Go for it! <G>
Also in the DIY category -- from Fine Woodworking magazine:
http://www.taunton.com/finewoodworking/Workshop/WorkshopPDF.aspx?id=2758
I think it was in a recent FWW issue, too.
Pat Barber wrote:
> http://www.twistedknotwoodshop.com/router.htm
>
> It's not the Norm table but it is free.... and
> it is VERY close to the Norm table...
>
[snip]
Thanks alot. I found that one earlier and that is the one I am gonna
build I think.
Pat Barber wrote:
> http://www.twistedknotwoodshop.com/router.htm
>
> It's not the Norm table but it is free.... and
> it is VERY close to the Norm table...
>
> [email protected] wrote:
>
> > Title says it all. I just bought a new router and now want a table.
> > Not one of the short standing ones that u need to put on top of
> > something to use. My dad has a craftsman table that is about 4' tall
> > but he said he doesn't think they are available anymore. Does anyone
> > know of a different brand?
> >
[email protected] wrote:
> Title says it all. I just bought a new router and now want a table.
> Not one of the short standing ones that u need to put on top of
> something to use. My dad has a craftsman table that is about 4' tall
> but he said he doesn't think they are available anymore. Does anyone
> know of a different brand?
My shop is too small for a permanent dedicated router table. I keep
meaning to build a combination table saw/router table station but
people keep asking me to build them stuff.
I make do with a piece of 7/8 melamine that used to be part of a
computer desk, with a cutout i made for a rousseau router plate mounted
to a Hitachi - with a router raizer - supported by my workmate 550.
When I don't need a table, the router and bits live in a big drawer
underneath the SCMS, the workmate folds up and the tabletop goes up on
the lumber rack. Takes about five minutes to set it back up. Oh, and I
made a fence/dust collector that hangs on the wall but usually just
ductaping the shopvac hose in the right place gets all the shavings.
The more I work with that setup the harder it is to justify that table
saw/router station. I haven't found a task I'm unable to do with it. I
suppose if I run across a project that calls for hours upon hours of
router table work, it will seem a little more primitive.
Well, there were those times when the workmate was holding the top for
the workbench I was building, and when I used it to stored the bed for
the Griz jointer while I was hunting down somebody to help me get it
assembled. That was several weeks when I didn't have a router table
available. Or a workmate, for that matter. But it didn't hinder me much.
[email protected] wrote:
> Title says it all. I just bought a new router and now want a table.
> Not one of the short standing ones that u need to put on top of
> something to use. My dad has a craftsman table that is about 4' tall
> but he said he doesn't think they are available anymore. Does anyone
> know of a different brand?
>
Harbor Freight has a nice, sturdy looking, table. For $169 they even
toss in a spare router.
Bill
--
I like America, just as everybody else does. I love America, I gotta say
that. But America will be judged.
Bob Dylan
[email protected] wrote:
> Title says it all. I just bought a new router and now want a table.
> Not one of the short standing ones that u need to put on top of
> something to use. My dad has a craftsman table that is about 4' tall
> but he said he doesn't think they are available anymore. Does anyone
> know of a different brand?
>
Sorry ... my first reply should have included this link.
http://www.harborfreight.com/cpi/ctaf/displayitem.taf?Itemnumber=91130
Bill
--
Signature line omitted.
Sun, Dec 3, 2006, 3:57pm (EST-3) [email protected] doth sayeth:
Title says it all. I just bought a new router and now want a table.
<snip>
I figure you could get one of the bench stands and mount it on one
of the unifersal sands.
Or, you could make your own. I've not seen any that meet my needs,
so I made one. Then made another. Then modified that one. I think I'm
on the Mark III version, but could be Mark IV. I didn't use no
teenkin' plans, didn't use steenkin plans for any of my tools. Just
decided what I needed and made it. The lathe stand is kinda plain, very
sturdy, but light, no vibration. The saw stand is kinda art deco and I
can't recall how I made it.
JOAT
I am, therefore I think.
[email protected] (in
[email protected]) said:
| Title says it all. I just bought a new router and now want a
| table. Not one of the short standing ones that u need to put on top
| of something to use. My dad has a craftsman table that is about 4'
| tall but he said he doesn't think they are available anymore. Does
| anyone know of a different brand?
I bought a Jessem table and added a Router-Lift; and haven't been
unhappy with the combination.
If I were starting from scratch and didn't want to take the time to
build my own I think I'd give serious consideration to one of the
tables at:
http://www.rt1000.com
(I have no connection with them at all.)
--
Morris Dovey
DeSoto Solar
DeSoto, Iowa USA
http://www.iedu.com/DeSoto
Lew Hodgett (in [email protected])
said:
| [email protected] wrote:
|
| > Does anyone have the plans handy for the Norm style router table?
|
| The NYW does.
|
| Built an early version which works quite well.
Speaking of DIY router tables - do you (or anyone) have a URL for
UA100's web page showing construction of his router table? I still
think it's one of the best I've seen...
--
Morris Dovey
DeSoto Solar
DeSoto, Iowa USA
http://www.iedu.com/DeSoto
They're at
http://webpages.charter.net/michael.white/img_0569.jpg (front)
http://webpages.charter.net/michael.white/img_0570.jpg (inside cabinet)
http://webpages.charter.net/michael.white/img_0571.jpg (top)
http://webpages.charter.net/michael.white/img_0572.jpg (back)
http://webpages.charter.net/michael.white/img_0573.jpg (side)
The only one I cropped down is the first (to about 350 K). The others are
pretty much straight from the camera (about 2 MB).
I used a piece of angle iron (like the one in the back of the cabinet
holding on the back piece of plywood) to hold the middle shelf ledge in
place.
I've been happy with this design, and re-used it for a jointer, sans wheels
(needed more stability).
--
Michael White "To protect people from the effects of folly is to
fill the world with fools." -Herbert Spencer
[email protected] wrote:
> Hey Mike I would like to see some pics when u get a chance. Thanks
> alot
> Michael White wrote:
>> [email protected] wrote:
>>
>> > Title says it all. I just bought a new router and now want a table.
>> > Not one of the short standing ones that u need to put on top of
>> > something to use. My dad has a craftsman table that is about 4' tall
>> > but he said he doesn't think they are available anymore. Does anyone
>> > know of a different brand?
>>
>> I bought the Bosch router table, then built a stand to put it in. The
>> stand cost me less to build than the Bosch stand, as I used a lot of
>> spare lumber
>> I had lying around. The stand is an enclosed cabinet (i.e. thee sides
>> and
>> a pair of doors on the fourth) on locking casters with two shelves. One
>> shelf in the cabinet is just the perfect size to hold the case the router
>> set came in (purely accidental - gotta love it when it works out though
>> :). I use the other shelf for bits and various other router tools,
>> including
>> small screws and springs. I put ledges on the shelves so nothing rolls
>> off.
>>
>> Took me a lazy day to do - no glue, just 2x4s screwed together for the
>> frame, 1/4" plywood for the sides, and 3/4" plywood for the shelves and
>> top.
>>
>> The Bosch stand is just a bare table with a single shelf. The shelf is
>> useless for about anything except holding the case for the router.
>> Anything small or light will fall off.
>>
>> I can send you photos of it if you like.
>> --
>> Michael White "To protect people from the effects of folly is to
>> fill the world with fools." -Herbert Spencer
Patriarch wrote:
> [email protected] wrote in news:1165190264.856881.197520
> @l12g2000cwl.googlegroups.com:
>
>> Title says it all. I just bought a new router and now want a table.
>> Not one of the short standing ones that u need to put on top of
>> something to use. My dad has a craftsman table that is about 4' tall
>> but he said he doesn't think they are available anymore. Does anyone
>> know of a different brand?
>>
>>
>
> Rockler. Woodcraft. Amazon. Build your own.
Bosch makes a real nice table, with a stand (optional). Boxed mine in
and store routers in it. Pricey, could build a Norm style router
station for less, but I needed it now.
Morris,
Is this the one that you were asking about?
http://www.delorie.com/wood/projects/router/
Peter.
<[email protected]> wrote in message
news:[email protected]...
> On 3 Dec 2006 15:57:44 -0800, [email protected] wrote:
>
>>Title says it all. I just bought a new router and now want a table.
>>Not one of the short standing ones that u need to put on top of
>>something to use. My dad has a craftsman table that is about 4' tall
>>but he said he doesn't think they are available anymore. Does anyone
>>know of a different brand?
>
>
> If you have a table saw and you _don't_ have a lot of space, you can
> always mount the router in the extension table. I even think Harbor
> Freight has a cast iron extension table with a router mount built in.
> I've often thought about it... the 450+ pounds of my unisaw would make
> a nice, sturdy base.
Here are a few ideas. JG
http://www.jessem.com/rout_r_tables.htm
http://www.jessem.com/mast_r_lift_excel.htm
http://www.jessem.com/mite_r_slide.htm
<[email protected]> wrote in message
news:[email protected]...
> Title says it all. I just bought a new router and now want a table.
> Not one of the short standing ones that u need to put on top of
> something to use. My dad has a craftsman table that is about 4' tall
> but he said he doesn't think they are available anymore. Does anyone
> know of a different brand?
>
http://www.twistedknotwoodshop.com/router.htm
It's not the Norm table but it is free.... and
it is VERY close to the Norm table...
[email protected] wrote:
> Title says it all. I just bought a new router and now want a table.
> Not one of the short standing ones that u need to put on top of
> something to use. My dad has a craftsman table that is about 4' tall
> but he said he doesn't think they are available anymore. Does anyone
> know of a different brand?
>
[email protected] wrote:
> Does anyone
> know of a different brand?
Yours!
This is a _GREAT_ opportunity to make something. You can even make it
at exactly your preferred height.
For a basic model, all you need is maybe one sheet of 3/4" MDF, some
scrap hardwood, and some laminate, all available at any Borg.
For the top, laminate two sheets of 3/4" MDF, attach 3/4 x 1 1/2"
hardwood trim all around, and laminate both sides with plastic laminate.
Buy an "insert" that fits your router and install it per the
manufacturer's instructions.
A fence can be as simple as a jointed piece of stock, an elaborate
shopmade version from one of the 400 "Ultimate Router Table" magazine
articles, or purchased.
The cabinet is a box! You can go crazy with beautifully dovetailed
drawers and frame and panel sides, or stay with a simple MDF or plywood
box with a single access door. Make or buy a "remote switch", and
you're good to go. Remote switches are easily made with a single box,
one of those duplex switches that is a switch and single outlet, and an
extension cord.
Don't like the height? Make different cabinet box. Don't like the
table? Think out your likes and dislikes, and reuse the insert and
fence on your next one.
Take a look at the Bench Dog tables at a local tool store. You can do
it, there is no wrong answer. Go for it! <G>
[email protected] wrote in news:1165190264.856881.197520
@l12g2000cwl.googlegroups.com:
> Title says it all. I just bought a new router and now want a table.
> Not one of the short standing ones that u need to put on top of
> something to use. My dad has a craftsman table that is about 4' tall
> but he said he doesn't think they are available anymore. Does anyone
> know of a different brand?
>
>
Rockler. Woodcraft. Amazon. Build your own.
[email protected] wrote:
> Title says it all. I just bought a new router and now want a table.
> Not one of the short standing ones that u need to put on top of
> something to use. My dad has a craftsman table that is about 4' tall
> but he said he doesn't think they are available anymore. Does anyone
> know of a different brand?
I bought the Bosch router table, then built a stand to put it in. The stand
cost me less to build than the Bosch stand, as I used a lot of spare lumber
I had lying around. The stand is an enclosed cabinet (i.e. thee sides and
a pair of doors on the fourth) on locking casters with two shelves. One
shelf in the cabinet is just the perfect size to hold the case the router
set came in (purely accidental - gotta love it when it works out though :).
I use the other shelf for bits and various other router tools, including
small screws and springs. I put ledges on the shelves so nothing rolls
off.
Took me a lazy day to do - no glue, just 2x4s screwed together for the
frame, 1/4" plywood for the sides, and 3/4" plywood for the shelves and
top.
The Bosch stand is just a bare table with a single shelf. The shelf is
useless for about anything except holding the case for the router.
Anything small or light will fall off.
I can send you photos of it if you like.
--
Michael White "To protect people from the effects of folly is to
fill the world with fools." -Herbert Spencer
On 3 Dec 2006 15:57:44 -0800, [email protected] wrote:
>Title says it all. I just bought a new router and now want a table.
>Not one of the short standing ones that u need to put on top of
>something to use. My dad has a craftsman table that is about 4' tall
>but he said he doesn't think they are available anymore. Does anyone
>know of a different brand?
If you have a table saw and you _don't_ have a lot of space, you can
always mount the router in the extension table. I even think Harbor
Freight has a cast iron extension table with a router mount built in.
I've often thought about it... the 450+ pounds of my unisaw would make
a nice, sturdy base.
[email protected] wrote:
> Does anyone have the plans handy for the Norm style router table?
The NYW does.
Built an early version which works quite well.
Lew