Grizzly Table Saw

"Digger" <DW> wrote in message news:[email protected]...
> I have found a new Grizzly G1023Z 3hp table saw that was set up to take
> pictures for a magazine article and used to cut a couple of pieces of wood
> during pictures. It is in like new condition with the parts protected and
> in storage right now. The question is: what is it worth in the condition
> described? It has the Shop Fox Fence and standard rails.

Since it is assembled, and you won't have to pay shipping charges, it would
be worth about 95% to 100% of list. Just check it out for alignment as you
would any new saw.
Ed

"Lee Michaels" <leemichaels*nada-spam*@comcast.net> wrote in message:
> > What's Cosmoline?
>
> Thick, gooey grease which is smeared on machinery, guns and anything else
> you don't want to rust. It is a lot of work to remove it. There are
machines
> and guns which have been packed in this stuff for forty or more years and
> when cleaned up, the item works just fine.

Or in other words - Traves best kept secret . . . . sheep lube! LOL!

LOL! lol! lol!

LOL! Jums he he he hehehe

On Mon, 28 Jul 2003 12:30:02 GMT, "Jim Mc Namara"
<[email protected]>Crawled out of the shop and said. . .:

>Hell - that's worth $50! LOL!
>
>Jums
>
>
>"me" <[email protected]> wrote in message
>news:[email protected]...
>>
>> Maybe more... since all the cosmoline is probably removed.
>>
>>
>

hehem, if the Cosmoline is gone, that's worth over 100$ to me,,,took
me 3 hours to get the crap off the last casting i bought.

Traves

Digger writes:

>I have found a new Grizzly G1023Z 3hp table saw that was set up to take
>pictures for a magazine article and used to cut a couple of pieces of wood
>during pictures. It is in like new condition with the parts protected and
>in storage right now. The question is: what is it worth in the condition
>described? It has the Shop Fox Fence and standard rails.

Check retail. You might offer no MORE than 60% of retail (don't forget
shipping) to see what happens. I'd pay not much more than that, even if the saw
is perfect. For one thing, you'll not be getting a warranty. Or, if you're
feeling fiesty, offer half of new price. You can always come up. You can't come
down.


Charlie Self

"Republicans understand the importance of bondage between a mother and child."
Dan Quayle

"Edwin Pawlowski" <[email protected]> wrote in message
news:%[email protected]...
>
> "Digger" <DW> wrote in message news:[email protected]...
> > I have found a new Grizzly G1023Z 3hp table saw that was set up to take
> > pictures for a magazine article and used to cut a couple of pieces of
wood
> > during pictures. It is in like new condition with the parts protected
and
> > in storage right now. The question is: what is it worth in the
condition
> > described? It has the Shop Fox Fence and standard rails.
>
> Since it is assembled, and you won't have to pay shipping charges, it
would
> be worth about 95% to 100% of list. Just check it out for alignment as
you
> would any new saw.
> Ed
>
>
I would want to adjust everthing, as it was probably just bolted together at
the photo shoot for pictures, not accuracy.

Dig




-----= Posted via Newsfeeds.Com, Uncensored Usenet News =-----
http://www.newsfeeds.com - The #1 Newsgroup Service in the World!
-----== Over 80,000 Newsgroups - 16 Different Servers! =-----

"Charlie Self" <[email protected]> wrote in message
news:[email protected]...
> Check retail. You might offer no MORE than 60% of retail (don't forget
> shipping) to see what happens. I'd pay not much more than that, even if
the saw
> is perfect. For one thing, you'll not be getting a warranty. Or, if you're
> feeling fiesty, offer half of new price. You can always come up. You can't
come
> down.
>
>
> Charlie Self
>
> "Republicans understand the importance of bondage between a mother and
child."
> Dan Quayle
>
>

His bottom dollar is $600 (delivered). It's $1000 from Grizzly right now,
but this one is assembled and de-sludged, and only needs fine tuning.
That's worth something to me, so I'm thinking of latching on to it. Just
bought a Grizz 6" jointer with two sets of blades, off of Ebay for $232.50
delivered, instead of the $450 I was planning on spending. Now if this
broken leg will heal, I can finish getting the new doors on the garage and
moving the WW tools in!

Dig




-----= Posted via Newsfeeds.Com, Uncensored Usenet News =-----
http://www.newsfeeds.com - The #1 Newsgroup Service in the World!
-----== Over 80,000 Newsgroups - 16 Different Servers! =-----

"Edwin Pawlowski" <[email protected]> wrote in message
news:%[email protected]...
>
> "Digger" <DW> wrote in message news:[email protected]...
> > I have found a new Grizzly G1023Z 3hp table saw that was set up to take
> > pictures for a magazine article and used to cut a couple of pieces of
wood
> > during pictures. It is in like new condition with the parts protected
and
> > in storage right now. The question is: what is it worth in the
condition
> > described? It has the Shop Fox Fence and standard rails.
>
> Since it is assembled, and you won't have to pay shipping charges, it
would
> be worth about 95% to 100% of list. Just check it out for alignment as
you
> would any new saw.
> Ed

Maybe more... since all the cosmoline is probably removed.

Actually a razor blade got most of the cosmoline off the flat faces of the
saw in a hurry. They just needed a quick wipe with some paint thinner to
clean up. The groves and other rounded portions are a pain however.

-Jack


"Lee Michaels" <leemichaels*nada-spam*@comcast.net> wrote in message
news:F%lVa.3621$o%2.3217@sccrnsc02...
>
> "Wolf Lahti" <[email protected]> wrote in message
> news:[email protected]...
> > Um...
> >
> > What's Cosmoline?
>
> Thick, gooey grease which is smeared on machinery, guns and anything else
> you don't want to rust. It is a lot of work to remove it. There are
machines
> and guns which have been packed in this stuff for forty or more years and
> when cleaned up, the item works just fine.
>
>
>

Um...

What's Cosmoline?

On Mon, 28 Jul 2003 08:26:37 -0500, "Digger" <DW>Crawled out of the
shop and said. . .:

snip

>
>
>So $600 is probably a decent deal? Probably should consider this as worth
>buying I guess.
>
Digger, yea, all kidding aside i would tend to lean towards buying it.

Traves

"Traves W. Coppock" <[email protected]>


> hehem, if the Cosmoline is gone, that's worth over 100$ to me,,,took
> me 3 hours to get the crap off the last casting i bought.
>
> Traves


I dont know about that,,,, ;!) A lot of furniture being imported from
Mexico seems to have a yellowy brown finish that was probably mostly
Cosomline. That much Cosmoline could be used on a lot of projects.. LOL.

I remember something that worked good for a friend of mine
when cleaning Cosmo (sheep dip) off one of my older rifles.
Its called Ed's red

http://www.hanned.com/techedsred.html

1 part - Dexron ATF, GM Spec. D-20265 or later.

1 part - Kerosene - deodorized, K1

1 part - Aliphatic Mineral Spirits CAS #64741-49-9, or substitute "Stoddard
Solvent", CAS #8052-41-3, or equivalent.

1 part - Acetone, CAS #67-64-1.

(Optional 1 lb. of Lanolin, Anydrous, USP per gallon, or OK to substitute
Lanolin, Modified, Topical Lubricant, from the drug store.)




--
The software said it ran under Windows 98/NT/2000, or better.
So I installed it on Linux...
"JackD" <[email protected]> wrote in message news:[email protected]...
> Actually a razor blade got most of the cosmoline off the flat faces of the
> saw in a hurry. They just needed a quick wipe with some paint thinner to
> clean up. The groves and other rounded portions are a pain however.
>
> -Jack
>
>
> "Lee Michaels" <leemichaels*nada-spam*@comcast.net> wrote in message
> news:F%lVa.3621$o%2.3217@sccrnsc02...
> >
> > "Wolf Lahti" <[email protected]> wrote in message
> > news:[email protected]...
> > > Um...
> > >
> > > What's Cosmoline?
> >
> > Thick, gooey grease which is smeared on machinery, guns and anything
else
> > you don't want to rust. It is a lot of work to remove it. There are
> machines
> > and guns which have been packed in this stuff for forty or more years
and
> > when cleaned up, the item works just fine.
> >
> >
> >
>
>

On Tue, 29 Jul 2003 13:00:44 GMT, "Jim Mc Namara" <[email protected]>
Crawled out of the shop and said. . .:

snip


>Or in other words - Traves best kept secret . . . . sheep lube! LOL!
>
>LOL! lol! lol!
>
>LOL! Jums he he he hehehe
>
>
>
>
>

im gonna make like i dint see that, , ,

Traves *G*

"Traves W. Coppock" after washing his hands, wrote in message:
> im gonna make like i dint see that, , ,

Sure go ahead - third eye blind! LOL!

Jums