I could use a little advice.I have a couple acres of stunted log pole
pine I want to turn into rail fence I have a 2 inch power tenon cutter
but need advice as to what kind of a bit would work best for cutting
the holes in the posts.Thank you.Tinker
----== Posted via Newsfeed.Com - Unlimited-Uncensored-Secure Usenet News==----
http://www.newsfeed.com The #1 Newsgroup Service in the World! >100,000 Newsgroups
---= 19 East/West-Coast Specialized Servers - Total Privacy via Encryption =---
>Gerald Lamb asks:
>I could use a little advice.I have a couple acres of stunted log pole
>pine I want to turn into rail fence I have a 2 inch power tenon cutter
>but need advice as to what kind of a bit would work best for cutting
>the holes in the posts.Thank you.Tinker
Several options.
Buy keith's chain mortiser.
Buy a cheapo mortiser from HF and sell it after the job is done.
Go check out Lee Valley's Greenwood (tm) bits. p 125 of the 2002/2003 tool
catalog.
Marc
In article <[email protected]>,
[email protected] says...
> I could use a little advice.I have a couple acres of stunted log pole
> pine I want to turn into rail fence I have a 2 inch power tenon cutter
> but need advice as to what kind of a bit would work best for cutting
> the holes in the posts.Thank you.Tinker
>
Auger, a _strong_ drill, and an extension side arm on the
drill.
--
Mark
The truth as I perceive it to be.
Your perception may be different.
Triple Z is spam control.