octagon

"Don Haynes" <[email protected]> wrote in message
news:[email protected]...
> need help .i would like to know the degrees of cut to make octagon
> thanks
>

This question could have been avoided with a few seconds of thought. A
square would be 45 deg, an oct. would be 22.5

In article <[email protected]>,
Don Haynes <[email protected]> wrote:
>need help .i would like to know the degrees of cut to make octagon
>thanks
>

depending on what you're measuring, and how you use it, one or more of
the following apply:
22.5
45
67.5
112.5
135
157.5

This may help- it's an octagon calculator.

http://junior.apk.net/~jbarta/octagon_layout/


"Don Haynes" <[email protected]> wrote in message
news:[email protected]...
> need help .i would like to know the degrees of cut to make octagon
> thanks
>

Don Haynes wrote:
> need help .i would like to know the degrees of cut to make octagon
> thanks
>
360 degrees divided by the number of sides (8) divided by 2 for the
table saw setting equals 22.5 degrees.

On Sun, 17 Jul 2005 19:18:33 -0400, [email protected] (Don Haynes)
wrote:

>need help .i would like to know the degrees of cut to make octagon
>thanks

135 inside / 45 outside.

On 7/17/2005 7:18 PM Don Haynes mumbled something about the following:
> need help .i would like to know the degrees of cut to make octagon
> thanks
>
Depends on what degree you're measuring.

--
Odinn
RCOS #7
SENS(less)
SLUG

"The more I study religions the more I am convinced that man never
worshipped anything but himself." -- Sir Richard Francis Burton

Reeky's unofficial homepage ... http://www.reeky.org
'03 FLHTI ........... http://www.sloanclan.org/gallery/ElectraGlide
'97 VN1500D ......... http://www.sloanclan.org/gallery/VulcanClassic
Atlanta Biker Net ... http://www.atlantabiker.net
Vulcan Riders Assoc . http://www.vulcanriders.org

rot13 [email protected] to reply