Well SWMBO signed off on the Dust Collection system. After much research, I
am going with Oneida for all the DC and ductwork.
There is one simple (I thought) thing that Oneida does not have a solution
for though, and I need your advice...
I have an extra drop ran to my workbench with a 3" flex hose for use with
power hand tools (Biscuit Jointer, sander, Circular saw etc.) I need a
quick disconnect solution to reduce the output port on these machines(which
vary slightly in size) to the 3" flex hose?
Recommendations?
hda
On Sun, 28 Sep 2003 19:16:48 -0400, "A.I."
<news@***REMOVETHIS***iskowitz.net> wrote:
>I have an extra drop ran to my workbench with a 3" flex hose for use with
>power hand tools (Biscuit Jointer, sander, Circular saw etc.) I need a
>quick disconnect solution to reduce the output port on these machines(which
>vary slightly in size) to the 3" flex hose?
My bench drip is simply a 4" blast gate with a "quick connect" front,
instead of a standard gate. I keep an assortment of adaptors nearby
for sander hoses, biscuit joiner hose, etc...
In my area, both Woodcraft and Woodworker's Warehouse carry the
special gates.
Barry