I bought one from them at last year's wood show and liked it a lot, so I
decided to pick up another one for my router table at this year's wood show.
Well, they changed the featherbow jr. and left out the L brackets that you
attach the jr. with. The supplied paperwork now shows that you are supposed
to drill holes in your fence and run bolts through to hold them in place,
but the bolts that they supplied are the same ones that came with the
original kit and they aren't long enough to go through a fence. I sent them
an e-mail about it and asked if they could please send a set of the original
L brackets (because they will work with my existing fence) and they never
even answered my e-mail. I like the design of both the featherbow and the
featherbow jr. (except for this bracket elimination issue), especially the
feature of the featherbow that provides a force indication of 10 lbs
pressure. It really works good. For any of you interested in seeing what a
featherbow is, their website is www.featherbow.com.
If any of you decide to buy one of these I think that you will be happy with
it. Just don't expect any after sale support from them.
--
Charley
"Searcher" <[email protected]> wrote in message
news:192Tf.165$kB1.17@trndny07...
> I just went to the Harrisburg Pa wooddorking show and I picked up the
> Featherbow, So far I like it, really easy to set up and use. Anyone else
> here that have tried or use this on a daily basis?
>
> Searcher
>
>
"Leon" <[email protected]> wrote in message
news:[email protected]...
>
> "Searcher" <[email protected]> wrote in message
> news:2x4Tf.1678$8G2.315@trndny01...
>>A feather board, Google it .
>
>
> Probably no need to Google it if it is called by its correct name to start
> with.
>
Ok, now I see that Feather Bow is a correct name. Sorry.
"Searcher" <[email protected]> wrote in message
news:2x4Tf.1678$8G2.315@trndny01...
>A feather board, Google it .
Probably no need to Google it if it is called by its correct name to start
with.
"Leon" <[email protected]> wrote in message
news:[email protected]...
>
> "Searcher" <[email protected]> wrote in message
> news:l_eTf.1308$3t1.475@trndny08...
> > It is actually three feather boards in one, which is why I like it. THe
> > rounded end is an easy pass through then you have the traditional
> > featherboard as well as one for delicate work. The traditional holds the
> > piece without allowing it to kick back.
>
> I under stand that there is 3 in one but what advantage does the bow have
> over a regular feather board. Why use it? It appears to me to offer
less
> as far as safety goes.
>
Even more curious, the sales pitch harps on how much better the featherbow
is than the featherboard, then they go and attach it to a featherboard.
B.
"Charley" <[email protected]> wrote in message
news:1deTf.70441$%[email protected]...
Snip
I like the design of both the featherbow and the
> featherbow jr. (except for this bracket elimination issue), especially the
> feature of the featherbow that provides a force indication of 10 lbs
> pressure. It really works good. For any of you interested in seeing what a
> featherbow is, their website is www.featherbow.com.
Why do you like the Feather Bow over a normal Feather Board? I use Bench
Dog feather boards and they too have a built in pressure indicator.
"Searcher" <[email protected]> wrote in message
news:l_eTf.1308$3t1.475@trndny08...
> It is actually three feather boards in one, which is why I like it. THe
> rounded end is an easy pass through then you have the traditional
> featherboard as well as one for delicate work. The traditional holds the
> piece without allowing it to kick back.
I under stand that there is 3 in one but what advantage does the bow have
over a regular feather board. Why use it? It appears to me to offer less
as far as safety goes.
I don't see as it would be any better than a standard featherboard, just
different. They are, of course, going to tell you it is. The idea is not new
in any case. The bow has been used as a hold down/ hold in for a long time.
They even used one on the Router Workshop once.
"Leon" <[email protected]> wrote in message
news:[email protected]...
>
> "Searcher" <[email protected]> wrote in message
> news:l_eTf.1308$3t1.475@trndny08...
> > It is actually three feather boards in one, which is why I like it. THe
> > rounded end is an easy pass through then you have the traditional
> > featherboard as well as one for delicate work. The traditional holds the
> > piece without allowing it to kick back.
>
> I under stand that there is 3 in one but what advantage does the bow have
> over a regular feather board. Why use it? It appears to me to offer
less
> as far as safety goes.
>
>
>
>
>
"CW" <[email protected]> wrote in message
news:[email protected]...
>I don't see as it would be any better than a standard featherboard, just
> different. They are, of course, going to tell you it is. The idea is not
> new
> in any case. The bow has been used as a hold down/ hold in for a long
> time.
> They even used one on the Router Workshop once.
But, but but , it "IS" revolutionary, according to their site.
It seems that it would not be as good as a feather board as it does not help
prevent backward motion. That would be especially important when used on a
router table.
On Sun, 19 Mar 2006 01:07:09 GMT, "Searcher" <[email protected]> wrote:
>I just went to the Harrisburg Pa wooddorking show and I picked up the
>Featherbow, So far I like it, really easy to set up and use. Anyone else
>here that have tried or use this on a daily basis?
>
>Searcher
>
For those of us not fully in the 21'st century, what is a Feathebow?
+--------------------------------------------------------------------------------+
If you're gonna be dumb, you better be tough
+--------------------------------------------------------------------------------+
It is actually three feather boards in one, which is why I like it. THe
rounded end is an easy pass through then you have the traditional
featherboard as well as one for delicate work. The traditional holds the
piece without allowing it to kick back.
I too didn't like the idea of the elimination of the brackets and I sure as
H*LL am not going to drill through my fence. What I did is too mount a piece
of oak on top of my fence and drill through that, works very well.
Searcher
"Searcher" <[email protected]> wrote in message
news:192Tf.165$kB1.17@trndny07...
>I just went to the Harrisburg Pa wooddorking show and I picked up the
>Featherbow, So far I like it, really easy to set up and use. Anyone else
>here that have tried or use this on a daily basis?
>
> Searcher
Ok, I have seen it and the demo.
Why use it instead of a regular feather board. It appears that it will not
prevent the board from sliding back. Is that a correct assumption?
What is the advantage that you see?
"Buddy Matlosz" <[email protected]> wrote in message
news:[email protected]...
>
> Even more curious, the sales pitch harps on how much better the featherbow
> is than the featherboard, then they go and attach it to a featherboard.
Yeah LOL.. In case you wanted to use something better I guess.
I still wish a user would comment on why he feels it was worth purchasing.
I would like to know in case there is something not easily understood or
apparent why it would be used instead.
Mark & Juanita wrote:
> On Sun, 19 Mar 2006 01:07:09 GMT, "Searcher" <[email protected]> wrote:
>
>
>>I just went to the Harrisburg Pa wooddorking show and I picked up the
>>Featherbow, So far I like it, really easy to set up and use. Anyone else
>>here that have tried or use this on a daily basis?
>>
>>Searcher
>>
>
>
> For those of us not fully in the 21'st century, what is a Feathebow?
>
See:
http://www.featherbow.com/
--
Jack Novak
Buffalo, NY - USA
[email protected]
(Remove -SPAM- to send email)