Ken Adams wrote:
> Just wondering if anybody built their own air hose reel? Doesn't seem
to
> difficult, but figured if someone already did it they could point me
in the
> right direction.
Thats a great idea. Those reels are expensive, even the ones that just
coil up...
I think if I were to do it, I would use a 1" pipe for the "axle" and
just have a corresponding hole. I don't think it would have to have
any kind of bearing assembly.
"Larry Bud" <[email protected]> writes:
>Ken Adams wrote:
>> Just wondering if anybody built their own air hose reel? Doesn't seem
>to
>> difficult, but figured if someone already did it they could point me
>in the
>> right direction.
>Thats a great idea. Those reels are expensive, even the ones that just
>coil up...
What do you consider expensive?
I bought a brand-new, made in the USA, air hose reel for $76 including
shipping off Ebay last April or so. This is a Reeltek made by Reelcraft.
It is spring loaded and has a racheting lock.
I think the same seller is still selling them occasionally, but not
necessarily for $76.
You can get Chiwanese hose reels with springs for around $50 or so I
think.
Brian Elfert
"Ken Adams" <[email protected]> wrote in message
news:M1QMd.3725$rB6.2996@edtnps91...
> Just wondering if anybody built their own air hose reel? Doesn't seem to
> difficult, but figured if someone already did it they could point me in
the
> right direction.
>
> Thanks
>
>
Nope, I have a commercial one. One piece of advice, I'd recommend a spring
loaded model so that it recoils on its own. The crank style are a pain in
the butt if you use the air hose a lot. By the time you bought the
materials and built your own it would probably be cheaper and better just to
buy one. Of course, you wouldn't have the pleasure of having made it
yourself.
--
-Mike-
[email protected]
No. You can get a 25' metal retractable reel at HD. That's an
improvement over the kludgy plastic reels Sears sells.
Dave
Ken Adams wrote:
> Just wondering if anybody built their own air hose reel? Doesn't seem to
> difficult, but figured if someone already did it they could point me in the
> right direction.
>
> Thanks
>
>
Once upon a time i built one out of a freebie garden hose reel. The task
involved replacing the innerds with air fittings. The only trick was
mounting the female end to the side of the reel so the male end could rotate
when the reel was used. IIRC, this just involved getting a few fittings and
a piece of plexiglass to mount everyhting to. I don't recall it being very
difficult to do, and it lasted several years residing in the back of the
truck with 100' of hose. --dave
"FriscoSoxFan" <[email protected]> wrote in message
news:[email protected]...
>I have the HF cheap hand crank type. You're right, wouldn't be hard to
> build if I had been so inclined. the key component is the swivel
> connector. After that, a little creativity and you're there.
>
Shop Notes magazine, Issue #41. Has plans for a portable hose reel. I
built it exactly to the plans, it will hold about 175 feet of air hose.
I've been carting it around with my air compressor, a manifold and a couple
framing nailers to build a new house, and it works great. Only thing that
might be useful on it is a bleeder valve and maybe some way of easily
anchoring the base on a construction site. For shop use, I just hang it on
the wall on two pegboard hooks.
Jon Endres
"Ken Adams" <[email protected]> wrote in message
news:M1QMd.3725$rB6.2996@edtnps91...
> Just wondering if anybody built their own air hose reel? Doesn't seem to
> difficult, but figured if someone already did it they could point me in
the
> right direction.
>
> Thanks
>
>
On Fri, 04 Feb 2005 19:28:44 GMT, "Ken Adams"
<[email protected]> wrote:
>Just wondering if anybody built their own air hose reel? Doesn't seem to
>difficult, but figured if someone already did it they could point me in the
>right direction.
>
>Thanks
>
I saw a plan in ShopNotes. The reel can be easily removed from the
wall if needed. I use a dowel (I turned from some scrap cherry wood)
1.5" dia x 18" with a clothes line tied to the center and attached to
the ceiling. I quickly coil the hose around my hand and elbow, then
slip the dowel through the hose. I do the same with a garden hose--no
kinks, easy to use, and nearly free to build.
On Fri, 04 Feb 2005 19:28:44 GMT, "Ken Adams"
<[email protected]> wrote:
>Just wondering if anybody built their own air hose reel? Doesn't seem to
>difficult, but figured if someone already did it they could point me in the
>right direction.
I'm not sure it would be worth it. I got a Grizzly hand-crank reel for
about $40 on sale. It holds 100' of hose and works very nicely. I
really doubt that I could buy the swivel fitting and rig something for
much less.
Tim Douglass
http://www.DouglassClan.com