TW

Tom Watson

03/10/2004 12:28 PM

Mimi's Bureau - Phase Two - Pix On ABPW

A week or two ago I asked for opinions on how to approach the
rehabbing of this old bureau.

I've taken a little bit of advice from each responder to bring it to
this point.

I knocked apart all the drawers and trimmed off the hollowed out
bottoms. Decided to use the original wood (poplar) to section the
sides back in but made no attempt to blend the old to the new with
stain, and did no sanding of the old, because I didn't want to lose
the maker's marks for the dovetail layout.

I replaced all of the missing runners and used the original poplar
once again, although I had been leaning towards maple. I know they
won't wear as well but I'm taking MH's suggestion and waxing them up
real good.

I used screws to fix the runners, rather than the original nails, but
I saved the nails.

I chose to leave the damaged moldings as they are, for now. I've got
a kitchen to finish before Thanksgiving and the moldings just weren't
in the time budget.

I cleaned the piece up; first with Murphy's Oil Soap and then with
mineral spirits, paying particular attention to the carvings, which
were scrubbed out with a toothbrush. This allowed the burl to be seen
a little more clearly.

Didn't strip the finish but instead used "Antique Mahogany" Briwax,
rubbed that in real good and then applied Johnson's Paste Wax. Buffed
that out with the lambs wool bonnet.

I'll be wiping down the inside of the box with shellac in a little bit
and then will do the same for the insides and outsides of the drawers.

To Mike Hide: I thought real hard about cobbling up some of those
French Feet that you suggested - but it seemed to me that it would be
like putting breast implants into a hundred year old woman -
interesting in and of itself - but just plain wrong somehow.

Thanks for all the suggestions.


Pix on ABPW.



Regards,
Tom.

"People funny. Life a funny thing." Sonny Liston

Thomas J.Watson - Cabinetmaker (ret.)
tjwatson1ATcomcastDOTnet (real email)
http://home.comcast.net/~tjwatson1