On Sat, 30 Jul 2005 18:28:55 GMT, JeffB <[email protected]>
wrote:
>Free, capable, no frills...
>http://www.delphiforfun.org/Programs/CutList.htm
Great, thanks!! The math isn't too shabby either.
"Rainbow" <[email protected]> wrote in message
news:[email protected]...
> Hi folks,
> Anybody here know of a decent,simple cut plan software that's either
> freeware/shareware or relatively
> inexpensive? Just need to save some time laying out cuts on plywood/MDF
> sheets.
> The simpler,the better(i'd rather be in front of a table saw than a PC).
> TIA!
I saw one that was simple and rudimentary advertised in this group. It was
$30. It was a ripoff.
Then there is cutlist plus by bridgewood design that costs more and is worth
every penny. http://cutlistplus.com
Bob
Free, capable, no frills...
http://www.delphiforfun.org/Programs/CutList.htm
--
JeffB
remove no.spam. to email
Rainbow wrote:
> Hi folks,
> Anybody here know of a decent,simple cut plan software that's either
> freeware/shareware or relatively
> inexpensive? Just need to save some time laying out cuts on plywood/MDF
> sheets.
> The simpler,the better(i'd rather be in front of a table saw than a PC).
> TIA!
>
>
"JeffB" <[email protected]> wrote in message
news:[email protected]...
> Free, capable, no frills...
> http://www.delphiforfun.org/Programs/CutList.htm
>
I am an old fart and my first thought was "What the hell happened to a quad
pad and a pencil!"
However, after downloading this freeware it is pretty darned slick!
Thanks.
RonB
"BillyBob" <[email protected]> wrote in message
news:[email protected]...
>
> "Rainbow" <[email protected]> wrote in message
> news:[email protected]...
>> Hi folks,
>> Anybody here know of a decent,simple cut plan software that's either
>> freeware/shareware or relatively
>> inexpensive? Just need to save some time laying out cuts on plywood/MDF
>> sheets.
>> The simpler,the better(i'd rather be in front of a table saw than a PC).
>> TIA!
>
> I saw one that was simple and rudimentary advertised in this group. It was
> $30. It was a ripoff.
>
> Then there is cutlist plus by bridgewood design that costs more and is
> worth
> every penny. http://cutlistplus.com
>
The freeware version of Cutlist will do a good job, just won't do more than
about 5 different sized pcs. @ once. IIRC, the low pay version is about $30,
and well worth it, will do(I think) 20 pcs.
--
Nahmie
The greatest headaches are those we cause ourselves.