Ss

"SNOWODG"

05/09/2005 7:08 PM

Pulleys for General 185 Contractors Saw

Looking for a source for pulleys for a General 185 contractors saw. I
picked up one of those link belts only to find out that the stock pulleys
are too small for the belt.

John C


This topic has 4 replies

k

in reply to "SNOWODG" on 05/09/2005 7:08 PM

06/09/2005 1:18 PM

Grizzly also has the correct 3/8" belt.

If you really want to replace the pulleys, Wilke Machinery sells a
machined pulley and link belt set for their TSC-10CL saw, which should
fit the General 185, since they're almost identical machines.

kb

klaatu

in reply to "SNOWODG" on 05/09/2005 7:08 PM

05/09/2005 6:26 AM

On Mon, 05 Sep 2005 19:08:57 GMT, "SNOWODG"
<[email protected]> wrote:

>Looking for a source for pulleys for a General 185 contractors saw. I
>picked up one of those link belts only to find out that the stock pulleys
>are too small for the belt.
>
>John C
>
That is because you need a 3/8 belt not 1/2.
I made the same mistake. Got mine at
McMaster Carr.

ss

"snowdog"

in reply to "SNOWODG" on 05/09/2005 7:08 PM

16/09/2005 10:59 AM

"klaatu" <[email protected]> wrote in message
news:[email protected]...
> On Mon, 05 Sep 2005 19:08:57 GMT, "SNOWODG"
> <[email protected]> wrote:
>
>>Looking for a source for pulleys for a General 185 contractors saw. I
>>picked up one of those link belts only to find out that the stock pulleys
>>are too small for the belt.
>>
>>John C
>>
> That is because you need a 3/8 belt not 1/2.
> I made the same mistake. Got mine at
> McMaster Carr.
>

Thanks, Didn't even realize they came in different sizes. Wasn't payin'
attention.

John C

Jj

"Jim"

in reply to "SNOWODG" on 05/09/2005 7:08 PM

05/09/2005 9:02 PM


"SNOWODG" <[email protected]> wrote in message
news:[email protected]...
> Looking for a source for pulleys for a General 185 contractors saw. I
> picked up one of those link belts only to find out that the stock pulleys
> are too small for the belt.
>
> John C
>
A shop which repairs electic motors whould be the place that I would go
first.
Jim


You’ve reached the end of replies