I am looking to build an entertainment center out of teak for my
living room. The rest of our furniture is all teak. I am looking for
teak plywood. Can anybody recomend any places in NJ?
I know teak is not cheap. But I thought I could build the cases out of
the teak plywood thereby eliminating having to veneer the sides and
top. The only part I would have to veneer is the edge.
Any tips or ideas are welcome. Thanks.
I am looking at my trusty Roberts Plywood Co. catalogue.
They have Teak veneer,1/4 thru3/4 ply, plus 4/4, 5/4,8/4 lumber.
They are out of the way for the Jersey group but they got it.
Where are you? I get to Bergenfield every few weeks or so.
I could pick it up fo you as I'm about 15 minutes from them.
On Sat, 22 Nov 2003 09:12:14 -0500, William J. <[email protected]>
wrote:
>I am looking to build an entertainment center out of teak for my
>living room. The rest of our furniture is all teak. I am looking for
>teak plywood. Can anybody recomend any places in NJ?
>
>I know teak is not cheap. But I thought I could build the cases out of
>the teak plywood thereby eliminating having to veneer the sides and
>top. The only part I would have to veneer is the edge.
>
>Any tips or ideas are welcome. Thanks.
Hi Scottso,
I work in Bayonne, and am not familiar with downtown area, are they off
440? Also web site comes up not found error,
Thanks,
Glenn
scottso wrote:
> If your anywhere near Bayonne, try Bayridge Lumber.
>
> BAYRIDGE LUMBER
> P.O. Box 11
> 101 E. 2nd STREET
> BAYONNE NJ
> USA
> 07002
> tel. 201-437-9200
> fax.201-437-1352
> email: [email protected]
> website: www.bayridgelumber.com
>
> "William J." <[email protected]> wrote in message
> news:[email protected]...
> > I am looking to build an entertainment center out of teak for my
> > living room. The rest of our furniture is all teak. I am looking for
> > teak plywood. Can anybody recomend any places in NJ?
> >
> > I know teak is not cheap. But I thought I could build the cases out of
> > the teak plywood thereby eliminating having to veneer the sides and
> > top. The only part I would have to veneer is the edge.
> >
> > Any tips or ideas are welcome. Thanks.
William J. <[email protected]> wrote in message news:<[email protected]>...
> I am looking to build an entertainment center out of teak for my
> living room. The rest of our furniture is all teak. I am looking for
> teak plywood. Can anybody recomend any places in NJ?
>
> I know teak is not cheap. But I thought I could build the cases out of
> the teak plywood thereby eliminating having to veneer the sides and
> top. The only part I would have to veneer is the edge.
>
> Any tips or ideas are welcome. Thanks.
South Jersey Lumbermen has teak plywood. They are located in
Laureldale on Holly st. If you are headed south, go down rt. 50 just
past atlantic city expressway overpass, make right on Holly, go about
1/2 mile and look for old blue coal truck on your left. Turn into
drive and stop at office. They are open from 7:00 to 4:00 monday to
thursday, friday they close at noon. Like most hardwood yards they are
closed for lunch from 12:00 to 1:00
If you are headed north on rt. 50 you cannot make a left on holly
because of median strip, go down to jughandle and make your turn.
mike
http://www.willardbrothers.net/teak.htm
[email protected] (Mlshaker) wrote:
>Try
>
>
>
> U. S. Mahogany Corp.
>746 Lloyd Rd Aberdeen, NJ 07747
Larry Levinson
Talking up to the vocal ...
LLevinson*Bloomberg.net
(remove the star etc ....)
Try 'New Jersey Lumbermen's' . . . around Hammonton, I think.
They do have a web site, so try a 'google search'
Regards,
Ron Magen
Backyard Boatshop
"William J." <[email protected]> wrote in message
news:[email protected]...
> I am looking to build an entertainment center out of teak for my
> living room. The rest of our furniture is all teak. I am looking for
> teak plywood. Can anybody recomend any places in NJ?
>
> I know teak is not cheap. But I thought I could build the cases out of
> the teak plywood thereby eliminating having to veneer the sides and
> top. The only part I would have to veneer is the edge.
>
> Any tips or ideas are welcome. Thanks.
William J. wrote:
> I am looking to build an entertainment center out of teak for my
> living room. The rest of our furniture is all teak. I am looking for
> teak plywood. Can anybody recomend any places in NJ?
>
> I know teak is not cheap. But I thought I could build the cases out of
> the teak plywood thereby eliminating having to veneer the sides and
> top. The only part I would have to veneer is the edge.
>
> Any tips or ideas are welcome. Thanks.
This may help.
http://www.woodfinder.net/home.html
-- Mark
If your anywhere near Bayonne, try Bayridge Lumber.
BAYRIDGE LUMBER
P.O. Box 11
101 E. 2nd STREET
BAYONNE NJ
USA
07002
tel. 201-437-9200
fax.201-437-1352
email: [email protected]
website: www.bayridgelumber.com
"William J." <[email protected]> wrote in message
news:[email protected]...
> I am looking to build an entertainment center out of teak for my
> living room. The rest of our furniture is all teak. I am looking for
> teak plywood. Can anybody recomend any places in NJ?
>
> I know teak is not cheap. But I thought I could build the cases out of
> the teak plywood thereby eliminating having to veneer the sides and
> top. The only part I would have to veneer is the edge.
>
> Any tips or ideas are welcome. Thanks.