http://home.mchsi.com/~lhote5/dumpster-wood.jpg
I stopped by a dumpster behind a home decor store that was renovating and
picked up a pickup load of stuff early this morning. I'm not sure what it
is but it is sure heavy and it's not oak. There must be a dozen pieces of
the stuff in my haul and more in that dumpster. I had an appointment at my
health club so I had to leave a lot more behind.. I can vision a piece of
fine furniture with this stuff. Maybe even another ultimate router table.
Larry
"Lawrence L'Hote" <[email protected]> wrote in message
news:BVuHd.14761$OF5.3346@attbi_s52...
> http://home.mchsi.com/~lhote5/dumpster-wood.jpg
>
> I stopped by a dumpster behind a home decor store that was renovating and
> picked up a pickup load of stuff early this morning. I'm not sure what it
> is but it is sure heavy and it's not oak. There must be a dozen pieces of
> the stuff in my haul and more in that dumpster. I had an appointment at
my
> health club so I had to leave a lot more behind.. I can vision a piece
of
> fine furniture with this stuff. Maybe even another ultimate router table.
>
> Larry
>
>
Wow, a gloat deserving of a roaring "you suck". That is some fine figured
MDF (morteius definium fir). Judging from the perforated stuff it might
have come from Iraq. You can surely make some fine furniture now. Check
Ikea for design ideas.
--
********
Bill Pounds
http://www.billpounds.com
<[email protected]> wrote in message
news:[email protected]...
> C'mon, Bill. Larry just likes a freebie as much as the rest of us. I'm
> sure your tounge was planted firmly in cheek during most or all of that
> post.
Yes, TIC and I know Larrys was too. He knows MDF when he sees it and would
never mistake it for Oak. First rule of Dumpster Diving is to know shit
from shinola.
--
********
Bill Pounds - who's legs have dangled out of more than one dumpster.
http://www.billpounds.com
"Lawrence L'Hote" <[email protected]> wrote in message
news:BVuHd.14761$OF5.3346@attbi_s52...
> http://home.mchsi.com/~lhote5/dumpster-wood.jpg
>
> I stopped by a dumpster behind a home decor store that was renovating and
> picked up a pickup load of stuff early this morning. I'm not sure what it
> is but it is sure heavy and it's not oak. There must be a dozen pieces of
> the stuff in my haul and more in that dumpster. I had an appointment at
my
> health club so I had to leave a lot more behind.. I can vision a piece
of
> fine furniture with this stuff. Maybe even another ultimate router table.
>
> Larry
>
>
Keep your eyes peeled for pallets. Some of these are made from hardwood and
if you select the chunks well some of these will clean up nicely.
--
Roger Shoaf
About the time I had mastered getting the toothpaste back in the tube, then
they come up with this striped stuff.
C'mon, Bill. Larry just likes a freebie as much as the rest of us. I'm
sure your tounge was planted firmly in cheek during most or all of that
post.
The legs (6) on my new couch were unacceptable, so it's sitting on
refinished sections of old dining table (oak, I think) legs, found by
the side of the road. Stained 'em to match the new mahogany floor.
Some new product display racks for my bottle stoppers are made from
found plexiglass from the back of a plastic company, what they consider
small scraps. All of the cabinets, stands, drawers etc. in my shop were
built with used melamine, salvaged from cabinets my "day job" company
was discarding. I still have about 6 sheets left, if I ever expand the
shop. Why should this useful stuff go to fill up a landfill?
Reduce - Reuse - Recycle!
In article <[email protected]>, Pounds on Wood
<[email protected]> wrote:
> Yes, TIC and I know Larrys was too. He knows MDF when he sees it and would
> never mistake it for Oak. First rule of Dumpster Diving is to know shit
> from shinola.
Manure has its uses, too. <g>
--
"The thing about saying the wrong words is that A, I don't notice it, and B,
sometimes orange water gibbon bucket and plastic." -- Mr. Burrows
In article <[email protected]>, mac davis
<[email protected]> wrote:
> I think that perforated stuff was that new lightweight building
> material used in space, wasn't it?
No, that's the highly-sought birdseye HDF!
Kevin
"Roger Shoaf" <[email protected]> wrote in message
news:[email protected]...
>
> "Lawrence L'Hote" <[email protected]> wrote in message
> news:BVuHd.14761$OF5.3346@attbi_s52...
> > http://home.mchsi.com/~lhote5/dumpster-wood.jpg
> >
> > I stopped by a dumpster behind a home decor store that was renovating
and
> > picked up a pickup load of stuff early this morning. I'm not sure what
it
> > is but it is sure heavy and it's not oak. There must be a dozen pieces
of
> > the stuff in my haul and more in that dumpster. I had an appointment at
> my
> > health club so I had to leave a lot more behind.. I can vision a piece
> of
> > fine furniture with this stuff. Maybe even another ultimate router
table.
> >
> > Larry
> >
> >
>
> Keep your eyes peeled for pallets. Some of these are made from hardwood
and
> if you select the chunks well some of these will clean up nicely.
>>>>>>>>>>
Check out your local printer who prints large sheets of paper. They buy the
paper bulk loaded on skids. Because the paper is easily damaged, the skids
are usually of high quality wood with no spaces or gaps in the top. Also
bulk paper needs to be strapped down to the skid so they need to use a top
or lid to prevent the straps from damaging the paper, this also needs to be
made of good quality material and is often a sheet of plywood. I am still
working on my stack of skid lids that I collected on my job before I retired
from the printing business. They were made out of 7/8" thick dressed pine.
After removing marks, cutting out knots and some minor wood damage, it makes
good wood for jigs, supports and other smaller items -- best of all it was
free.
>>>>>>>>>>>>>>>>>>
> --
>
> Roger Shoaf
>
> About the time I had mastered getting the toothpaste back in the tube,
then
> they come up with this striped stuff.
>
>
Lawrence L'Hote wrote:
> http://home.mchsi.com/~lhote5/dumpster-wood.jpg
>
> I stopped by a dumpster behind a home decor store that was renovating and
> picked up a pickup load of stuff early this morning. I'm not sure what it
> is but it is sure heavy and it's not oak. There must be a dozen pieces of
> the stuff in my haul and more in that dumpster. I had an appointment at my
> health club so I had to leave a lot more behind.. I can vision a piece of
> fine furniture with this stuff. Maybe even another ultimate router table.
>
> Larry
>
>
More proof that Larry is indeed the Duke of Dumpster.
j4
:-)
On Thu, 20 Jan 2005 03:32:45 -0500, "Cherokee-Ltd" <[email protected]>
wrote:
>"Tom Watson" <[email protected]> wrote in message
>>
>> Shazzam! You found a muthaload of the fabled Wormy MDF!
>>
>
>Wormy MDF... pfft
>I'd give up my entire inventory of wormy and spalted MDF for a tidy little
>stash of MDF Burl.
>
>-Brian
>
no problem...
mix vinegar and baking soda...
apply to surface
apply stain of choice while mixture is damp
watch chemical reaction and see your burl forming..
mac
Please remove splinters before emailing
"Tom Watson" <[email protected]> wrote in message
>
> Shazzam! You found a muthaload of the fabled Wormy MDF!
>
Wormy MDF... pfft
I'd give up my entire inventory of wormy and spalted MDF for a tidy little
stash of MDF Burl.
-Brian
On Wed, 19 Jan 2005 15:21:05 GMT, "Lawrence L'Hote" <[email protected]>
wrote:
>http://home.mchsi.com/~lhote5/dumpster-wood.jpg
>
>I stopped by a dumpster behind a home decor store that was renovating and
>picked up a pickup load of stuff early this morning. I'm not sure what it
>is but it is sure heavy and it's not oak. There must be a dozen pieces of
>the stuff in my haul and more in that dumpster. I had an appointment at my
>health club so I had to leave a lot more behind.. I can vision a piece of
>fine furniture with this stuff. Maybe even another ultimate router table.
>
>Larry
>
Shazzam! You found a muthaload of the fabled Wormy MDF!
Congratulations!
watson - who is thinking of posting some pix on how to turn wormy mdf
into cheery aid cherry - my most favoritest wood.
(don't worry none - i'm just foolin')
tjwatson1ATcomcastDOTnet (real email)
http://home.comcast.net/~tjwatson1 (webpage)
On Wed, 19 Jan 2005 07:58:53 -0800, "Pounds on Wood"
<[email protected]> wrote:
>
>
>"Lawrence L'Hote" <[email protected]> wrote in message
>news:BVuHd.14761$OF5.3346@attbi_s52...
>> http://home.mchsi.com/~lhote5/dumpster-wood.jpg
>>
>> I stopped by a dumpster behind a home decor store that was renovating and
>> picked up a pickup load of stuff early this morning. I'm not sure what it
>> is but it is sure heavy and it's not oak. There must be a dozen pieces of
>> the stuff in my haul and more in that dumpster. I had an appointment at
>my
>> health club so I had to leave a lot more behind.. I can vision a piece
>of
>> fine furniture with this stuff. Maybe even another ultimate router table.
>>
>> Larry
>>
>>
>
>Wow, a gloat deserving of a roaring "you suck". That is some fine figured
>MDF (morteius definium fir). Judging from the perforated stuff it might
>have come from Iraq. You can surely make some fine furniture now. Check
>Ikea for design ideas.
I think that perforated stuff was that new lightweight building
material used in space, wasn't it?
mac
Please remove splinters before emailing